Find · understand · compare
22344 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 22344. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
22344 dimensions and recorded technical data
Use the named dimensions for each complete record below. A generic d×D×B answer is not asserted where the base record is missing, dimension symbols are unverified, or the product uses a different geometry such as a housing or thrust assembly. Suffix records are not substituted for a missing base specification.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 43 recorded variants are listed. A dash means the value is missing, not zero.
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF22344-2CS5K/VT143Spherical roller bearing with tapered bore, integral sealing and relubrication features |
| 2844 kN | 3450 kN | — | 490 rpm | 114 kg114000 g |
| SKF22344-2CS5/VT143Spherical roller bearing with integral sealing and relubrication features |
| 2844 kN | 3450 kN | — | 490 rpm | 114 kg114000 g |
| SKF22344 CC/C3W33Spherical roller bearing with relubrication features |
| 2839 kN | 3450 kN | 1000 rpm | 1400 rpm | 114 kg114000 g |
| SKF22344 CC/C3W502Spherical roller bearing with relubrication features |
| 2839 kN | 3450 kN | 1000 rpm | 1400 rpm | 115 kg115000 g |
| SKF22344 CCJA/W33VA405Spherical roller bearing for vibratory applications, with relubrication features |
| 2839 kN | 3450 kN | 1000 rpm | 1400 rpm | 114 kg114000 g |
| SKF22344 CCK/C2W33Spherical roller bearing with tapered bore and relubrication features |
| 2839 kN | 3450 kN | 1000 rpm | 1400 rpm | 112 kg112000 g |
| SKF22344 CCK/C3W33Spherical roller bearing with tapered bore and relubrication features |
| 2839 kN | 3450 kN | 1000 rpm | 1400 rpm | 112 kg112000 g |
| SKF22344 CCK/C4W33Spherical roller bearing with tapered bore and relubrication features |
| 2839 kN | 3450 kN | 1000 rpm | 1400 rpm | 112 kg112000 g |
| SKF22344 CCKJA/W33VA405Spherical roller bearing for vibratory applications, with tapered bore and relubrication features |
| 2839 kN | 3450 kN | 1000 rpm | 1400 rpm | 118 kg118000 g |
| SKF22344 CCK/W33Spherical roller bearing with tapered bore and relubrication features |
| 2839 kN | 3450 kN | 1000 rpm | 1400 rpm | 112 kg112000 g |
| SKF22344 CC/VE346Spherical roller bearing with relubrication features |
| 2839 kN | 3450 kN | 1000 rpm | 1400 rpm | 115 kg115000 g |
| SKF22344 CC/W33Spherical roller bearing with relubrication features |
| 2839 kN | 3450 kN | 1000 rpm | 1400 rpm | 114 kg114000 g |
| FAG22344-BEA-XL-MA1-T41ASpherical Roller Bearing |
| 2800 kN | 3400 kN | 950 rpm | 1690 rpm | 117.6 kg117600 g |
| FAG22344-BE-XLSpherical Roller Bearing |
| 2800 kN | 3400 kN | 950 rpm | 1690 rpm | 113.75 kg113750 g |
| FAG22344-BE-XL-C3Spherical Roller Bearing |
| 2800 kN | 3400 kN | 950 rpm | 1690 rpm | 112.975 kg112975 g |
| FAG22344-BE-XL-C4Spherical Roller Bearing |
| 2800 kN | 3400 kN | 950 rpm | 1690 rpm | 112.7 kg112700 g |
| FAG22344-BE-XL-JPA-T41ASpherical Roller Bearing |
| 2800 kN | 3400 kN | 950 rpm | 1690 rpm | 115.46 kg115460 g |
| FAG22344-BE-XL-KSpherical Roller Bearing |
| 2800 kN | 3400 kN | 950 rpm | 1690 rpm | 110.795 kg110795 g |
| FAG22344-BE-XL-K-C2Spherical Roller Bearing |
| 2800 kN | 3400 kN | 950 rpm | 1690 rpm | 111.9 kg111900 g |
| FAG22344-BE-XL-K-C3Spherical Roller Bearing |
| 2800 kN | 3400 kN | 950 rpm | 1690 rpm | 110.65 kg110650 g |
| FAG22344-BE-XL-K-C4Spherical Roller Bearing |
| 2800 kN | 3400 kN | 950 rpm | 1690 rpm | 110.79 kg110790 g |
| FAG22344-BE-XL-K-JPA-T41ASpherical Roller Bearing |
| 2800 kN | 3400 kN | 950 rpm | 1690 rpm | 118 kg118000 g |
| TIMKEN22344EJW33W45ASpherical roller bearing |
| 2740 kN | 3240 kN | — | — | 110.99 kg110990 g |
| TIMKEN22344EJW33W45AC3Spherical roller bearing |
| 2740 kN | 3240 kN | — | — | 110.99 kg110990 g |
| TIMKEN22344EJW33W45AW800C4Spherical roller bearing |
| 2740 kN | 3240 kN | — | — | 110.97 kg110970 g |
| TIMKEN22344EMBW33W40W45AC3Spherical roller bearing |
| 2740 kN | 3240 kN | — | — | 116.72 kg116720 g |
| TIMKEN22344EMBW33W45ASpherical roller bearing |
| 2740 kN | 3240 kN | — | — | 116.74 kg116740 g |
| TIMKEN22344EMBW33W45AC3Spherical roller bearing |
| 2740 kN | 3240 kN | — | — | 116.74 kg116740 g |
| TIMKEN22344EMBW33W45AC6Spherical roller bearing |
| 2740 kN | 3240 kN | — | — | 116.74 kg116740 g |
| TIMKEN22344EMBW33W45AW800C4Spherical roller bearing |
| 2740 kN | 3240 kN | — | — | 116.71 kg116710 g |
| TIMKEN22344KEJW33W45ASpherical roller bearing |
| 2740 kN | 3240 kN | — | — | 108.56 kg108560 g |
| TIMKEN22344KEJW33W45AC3Spherical roller bearing |
| 2740 kN | 3240 kN | — | — | 108.56 kg108560 g |
| TIMKEN22344KEMBW33W45ASpherical roller bearing |
| 2740 kN | 3240 kN | — | — | 114.29 kg114290 g |
| TIMKEN22344KEMBW33W45AC3Spherical roller bearing |
| 2740 kN | 3240 kN | — | — | 114.29 kg114290 g |
| TIMKEN22344KEMBW33W904C4Spherical roller bearing |
| 2740 kN | 3240 kN | — | — | 114.29 kg114290 g |
| NSK22344CAME4Spherical roller bearing |
| 2940 kN | 3400 kN | — | — | 116 kg116000 g |
| NSK22344CAMKE4Spherical roller bearing |
| 2940 kN | 3400 kN | — | — | — |
| KOYO22344RSpherical roller bearing |
| 2980 kN | 3380 kN | — | 720 rpmLimiting Speeds(Grease Lub.): 720 min-1Limiting Speeds(Oil Lub.): 960 min-1 | 124 kg124000 g |
| KOYO22344RHASpherical roller bearing |
| 2960 kN | 3470 kN | — | 730 rpmLimiting Speeds(Grease Lub.): 730 min-1Limiting Speeds(Oil Lub.): 970 min-1 | 115 kg115000 g |
| KOYO22344RHAK+AH2344Spherical roller bearing |
| 2960 kN | 3470 kN | — | 730 rpmLimiting Speeds(Grease Lub.): 730 min-1Limiting Speeds(Oil Lub.): 970 min-1 | 127 kg127000 g |
| KOYO22344RHAK+H2344Spherical roller bearing |
| 2960 kN | 3470 kN | — | 730 rpmLimiting Speeds(Grease Lub.): 730 min-1Limiting Speeds(Oil Lub.): 970 min-1 | 130 kg130000 g |
| KOYO22344RK+AH2344Spherical roller bearing |
| 2980 kN | 3380 kN | — | 720 rpmLimiting Speeds(Grease Lub.): 720 min-1Limiting Speeds(Oil Lub.): 960 min-1 | 136 kg136000 g |
| KOYO22344RK+H2344Spherical roller bearing |
| 2980 kN | 3380 kN | — | 720 rpmLimiting Speeds(Grease Lub.): 720 min-1Limiting Speeds(Oil Lub.): 960 min-1 | 139 kg139000 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 22344-2CS5K/VT143 | Seal on both sides | Normal | CN | Sheet metal | Not recorded | Grease |
| SKF 22344-2CS5/VT143 | Seal on both sides | Normal | CN | Sheet metal | Not recorded | Grease |
| SKF 22344 CC/C3W33 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 22344 CC/C3W502 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 22344 CCJA/W33VA405 | Without | Normal, bore to P5 and outside diameter P6 | C4 | Surface-hardened sheet metal | Not recorded | None |
| SKF 22344 CCK/C2W33 | Without | Not recorded | C2 | Sheet metal | Not recorded | None |
| SKF 22344 CCK/C3W33 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 22344 CCK/C4W33 | Without | Not recorded | C4 | Sheet metal | Not recorded | None |
| SKF 22344 CCKJA/W33VA405 | Without | Normal, bore to P5 and outside diameter P6 | C4 | Surface-hardened sheet metal | Not recorded | None |
| SKF 22344 CCK/W33 | Without | Normal | CN | Sheet metal | Not recorded | None |
| SKF 22344 CC/VE346 | Without | Not recorded | CNP | Sheet metal | Not recorded | None |
| SKF 22344 CC/W33 | Without | Normal | CN | Sheet metal | Not recorded | None |
| FAG 22344-BEA-XL-MA1-T41A | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | MA — Solid brass cage | Not recorded | Not recorded |
| FAG 22344-BE-XL | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 22344-BE-XL-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 22344-BE-XL-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 22344-BE-XL-JPA-T41A | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | JPA — Sheet metal cage | Not recorded | Not recorded |
| FAG 22344-BE-XL-K | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 22344-BE-XL-K-C2 | Not recorded | Not recorded | C2 (Group 2) — Internal clearance smaller than CN | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 22344-BE-XL-K-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 22344-BE-XL-K-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 22344-BE-XL-K-JPA-T41A | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | JPA — Sheet metal cage | Not recorded | Not recorded |
| TIMKEN 22344EJW33W45A | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22344EJW33W45AC3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22344EJW33W45AW800C4 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22344EMBW33W40W45AC3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22344EMBW33W45A | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22344EMBW33W45AC3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22344EMBW33W45AC6 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22344EMBW33W45AW800C4 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22344KEJW33W45A | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22344KEJW33W45AC3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22344KEMBW33W45A | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22344KEMBW33W45AC3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22344KEMBW33W904C4 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| NSK 22344CAME4 | Not recorded | Not recorded | CN | Machined brass | Not recorded | Not recorded |
| NSK 22344CAMKE4 | Not recorded | Not recorded | CN | Machined brass | Not recorded | Not recorded |
| KOYO 22344R | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 22344RHA | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 22344RHAK+AH2344 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 22344RHAK+H2344 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 22344RK+AH2344 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 22344RK+H2344 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
SKF
22344-2CS5K/VT143
Spherical roller bearing with tapered bore, integral sealing and relubrication features
View full technical record →SKF22344-2CS5/VT143
Spherical roller bearing with integral sealing and relubrication features
View full technical record →FAG22344-BEA-XL-MA1-T41A
Spherical Roller Bearing
View full technical record →FAG22344-BE-XL
Spherical Roller Bearing
View full technical record →FAG22344-BE-XL-C3
Spherical Roller Bearing
View full technical record →FAG22344-BE-XL-C4
Spherical Roller Bearing
View full technical record →FAG22344-BE-XL-JPA-T41A
Spherical Roller Bearing
View full technical record →FAG22344-BE-XL-K
Spherical Roller Bearing
View full technical record →FAG22344-BE-XL-K-C2
Spherical Roller Bearing
View full technical record →FAG22344-BE-XL-K-C3
Spherical Roller Bearing
View full technical record →FAG22344-BE-XL-K-C4
Spherical Roller Bearing
View full technical record →FAG22344-BE-XL-K-JPA-T41A
Spherical Roller Bearing
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.