Find · understand · compare
22340 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 22340. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
22340 dimensions and recorded technical data
Use the named dimensions for each complete record below. A generic d×D×B answer is not asserted where the base record is missing, dimension symbols are unverified, or the product uses a different geometry such as a housing or thrust assembly. Suffix records are not substituted for a missing base specification.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 49 recorded variants are listed. A dash means the value is missing, not zero.
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF22340-2CS5K/VT143Spherical roller bearing with tapered bore, integral sealing and relubrication features |
| 2443 kN | 2900 kN | — | 550 rpm | 89.3 kg89300 g |
| SKF22340 CC/C08W509Spherical roller bearing with relubrication features |
| 2439 kN | 2900 kN | 1200 rpm | 1500 rpm | 91.2 kg91200 g |
| SKF22340 CC/C3W33Spherical roller bearing with relubrication features |
| 2439 kN | 2900 kN | 1200 rpm | 1500 rpm | 90.5 kg90500 g |
| SKF22340 CC/C3W513Spherical roller bearing with relubrication features |
| 2439 kN | 2900 kN | 1200 rpm | 1500 rpm | 90.5 kg90500 g |
| SKF22340 CC/C4W33Spherical roller bearing with relubrication features |
| 2439 kN | 2900 kN | 1200 rpm | 1500 rpm | 90.5 kg90500 g |
| SKF22340 CCJA/W33VA405Spherical roller bearing for vibratory applications, with relubrication features |
| 2439 kN | 2900 kN | 1200 rpm | 1500 rpm | 90.4 kg90400 g |
| SKF22340 CCJA/W33VA406Spherical roller bearing for vibratory applications, with relubrication features |
| 2439 kN | 2900 kN | 1200 rpm | 1500 rpm | 90.4 kg90400 g |
| SKF22340 CCK/C2W33Spherical roller bearing with tapered bore and relubrication features |
| 2439 kN | 2900 kN | 1200 rpm | 1500 rpm | 89.4 kg89400 g |
| SKF22340 CCK/C3W33Spherical roller bearing with tapered bore and relubrication features |
| 2439 kN | 2900 kN | 1200 rpm | 1500 rpm | 88.7 kg88700 g |
| SKF22340 CCK/C4W33Spherical roller bearing with tapered bore and relubrication features |
| 2439 kN | 2900 kN | 1200 rpm | 1500 rpm | 88.7 kg88700 g |
| SKF22340 CCKJA/W33VA405Spherical roller bearing for vibratory applications, with tapered bore and relubrication features |
| 2439 kN | 2900 kN | 1200 rpm | 1500 rpm | 88.5 kg88500 g |
| SKF22340 CCK/W33Spherical roller bearing with tapered bore and relubrication features |
| 2439 kN | 2900 kN | 1200 rpm | 1500 rpm | 88.7 kg88700 g |
| SKF22340 CCK/W33VQ424Spherical roller bearing with tapered bore and relubrication features |
| 2439 kN | 2900 kN | 1200 rpm | 1500 rpm | 88.7 kg88700 g |
| SKF22340 CC/W33Spherical roller bearing with relubrication features |
| 2439 kN | 2900 kN | 1200 rpm | 1500 rpm | 90.5 kg90500 g |
| SKF22340 CC/W33VE194Spherical roller bearing with locating slots and relubrication features |
| 2439 kN | 2900 kN | 1200 rpm | 1500 rpm | 90.5 kg90500 g |
| FAG22340-BEA-XL-MA1-T41ASpherical Roller Bearing |
| 2440 kN | 2950 kN | 1080 rpm | 1830 rpm | 94.485 kg94485 g |
| FAG22340-BE-XLSpherical Roller Bearing |
| 2440 kN | 2950 kN | 1080 rpm | 1830 rpm | 89.44 kg89440 g |
| FAG22340-BE-XL-C3Spherical Roller Bearing |
| 2440 kN | 2950 kN | 1080 rpm | 1830 rpm | 89.5 kg89500 g |
| FAG22340-BE-XL-C4Spherical Roller Bearing |
| 2440 kN | 2950 kN | 1080 rpm | 1830 rpm | 89.43 kg89430 g |
| FAG22340-BE-XL-JPA-T41ASpherical Roller Bearing |
| 2440 kN | 2950 kN | 1080 rpm | 1830 rpm | 91.485 kg91485 g |
| FAG22340-BE-XL-KSpherical Roller Bearing |
| 2440 kN | 2950 kN | 1080 rpm | 1830 rpm | 87.59 kg87590 g |
| FAG22340-BE-XL-K-C3Spherical Roller Bearing |
| 2440 kN | 2950 kN | 1080 rpm | 1830 rpm | 88.5 kg88500 g |
| FAG22340-BE-XL-K-C4Spherical Roller Bearing |
| 2440 kN | 2950 kN | 1080 rpm | 1830 rpm | 87.5 kg87500 g |
| FAG22340-BE-XL-K-JPA-T41ASpherical Roller Bearing |
| 2440 kN | 2950 kN | 1080 rpm | 1830 rpm | 89.55 kg89550 g |
| TIMKEN22340EJW33W45ASpherical roller bearing |
| 2470 kN | 2930 kN | — | — | 89.13 kg89130 g |
| TIMKEN22340EJW33W45AC2Spherical roller bearing |
| 2470 kN | 2930 kN | — | — | 89.13 kg89130 g |
| TIMKEN22340EJW33W45AC3Spherical roller bearing |
| 2470 kN | 2930 kN | — | — | 89.13 kg89130 g |
| TIMKEN22340EJW33W45AC4Spherical roller bearing |
| 2470 kN | 2930 kN | — | — | 89.13 kg89130 g |
| TIMKEN22340EMBW33W40W45AC3Spherical roller bearing |
| 2470 kN | 2930 kN | — | — | 92.93 kg92930 g |
| TIMKEN22340EMBW33W45ASpherical roller bearing |
| 2470 kN | 2930 kN | — | — | 92.95 kg92950 g |
| TIMKEN22340EMBW33W45AC3Spherical roller bearing |
| 2470 kN | 2930 kN | — | — | 92.95 kg92950 g |
| TIMKEN22340EMBW33W45AC4Spherical roller bearing |
| 2470 kN | 2930 kN | — | — | 92.95 kg92950 g |
| TIMKEN22340EMBW33W45AW800C4Spherical roller bearing |
| 2260 kN | 2930 kN | — | — | 92.93 kg92930 g |
| TIMKEN22340KEJW33W45ASpherical roller bearing |
| 2470 kN | 2930 kN | — | — | 86.98 kg86980 g |
| TIMKEN22340KEJW33W45AC2Spherical roller bearing |
| 2470 kN | 2930 kN | — | — | 86.98 kg86980 g |
| TIMKEN22340KEJW33W45AC3Spherical roller bearing |
| 2470 kN | 2930 kN | — | — | 86.98 kg86980 g |
| TIMKEN22340KEJW33W45AC4Spherical roller bearing |
| 2470 kN | 2930 kN | — | — | 86.98 kg86980 g |
| TIMKEN22340KEMBW33W45ASpherical roller bearing |
| 2470 kN | 2930 kN | — | — | 90.93 kg90930 g |
| TIMKEN22340KEMBW33W45AC2Spherical roller bearing |
| 2470 kN | 2930 kN | — | — | 90.93 kg90930 g |
| TIMKEN22340KEMBW33W45AC3Spherical roller bearing |
| 2470 kN | 2930 kN | — | — | 90.93 kg90930 g |
| TIMKEN22340KEMBW33W45AC4Spherical roller bearing |
| 2470 kN | 2930 kN | — | — | 90.93 kg90930 g |
| NSK22340CAME4Spherical roller bearing |
| 2500 kN | 2990 kN | — | — | 92.6 kg92600 g |
| NSK22340CAMKE4Spherical roller bearing |
| 2500 kN | 2990 kN | — | — | — |
| KOYO22340RSpherical roller bearing |
| 2510 kN | 2750 kN | — | 830 rpmLimiting Speeds(Grease Lub.): 830 min-1Limiting Speeds(Oil Lub.): 1100 min-1 | 95.4 kg95400 g |
| KOYO22340RHASpherical roller bearing |
| 2570 kN | 2920 kN | — | 820 rpmLimiting Speeds(Grease Lub.): 820 min-1Limiting Speeds(Oil Lub.): 1100 min-1 | 88.1 kg88100 g |
| KOYO22340RHAK+AH2340Spherical roller bearing |
| 2570 kN | 2920 kN | — | 820 rpmLimiting Speeds(Grease Lub.): 820 min-1Limiting Speeds(Oil Lub.): 1100 min-1 | 93.4 kg93400 g |
| KOYO22340RHAK+H2340Spherical roller bearing |
| 2570 kN | 2920 kN | — | 820 rpmLimiting Speeds(Grease Lub.): 820 min-1Limiting Speeds(Oil Lub.): 1100 min-1 | 101 kg101000 g |
| KOYO22340RK+AH2340Spherical roller bearing |
| 2510 kN | 2750 kN | — | 830 rpmLimiting Speeds(Grease Lub.): 830 min-1Limiting Speeds(Oil Lub.): 1100 min-1 | 101 kg101000 g |
| KOYO22340RK+H2340Spherical roller bearing |
| 2510 kN | 2750 kN | — | 830 rpmLimiting Speeds(Grease Lub.): 830 min-1Limiting Speeds(Oil Lub.): 1100 min-1 | 108 kg108000 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 22340-2CS5K/VT143 | Seal on both sides | Normal | CN | Sheet metal | Not recorded | Grease |
| SKF 22340 CC/C08W509 | Without | Not recorded | CN | Sheet metal | Not recorded | None |
| SKF 22340 CC/C3W33 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 22340 CC/C3W513 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 22340 CC/C4W33 | Without | Not recorded | C4 | Sheet metal | Not recorded | None |
| SKF 22340 CCJA/W33VA405 | Without | Normal, bore to P5 and outside diameter P6 | C4 | Surface-hardened sheet metal | Not recorded | None |
| SKF 22340 CCJA/W33VA406 | Without | Normal, bore to P5 and outside diameter P6 | C4 | Surface-hardened sheet metal | Not recorded | None |
| SKF 22340 CCK/C2W33 | Without | Not recorded | C2 | Sheet metal | Not recorded | None |
| SKF 22340 CCK/C3W33 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 22340 CCK/C4W33 | Without | Not recorded | C4 | Sheet metal | Not recorded | None |
| SKF 22340 CCKJA/W33VA405 | Without | Normal, bore to P5 and outside diameter P6 | C4 | Surface-hardened sheet metal | Not recorded | None |
| SKF 22340 CCK/W33 | Without | Normal | CN | Sheet metal | Not recorded | None |
| SKF 22340 CCK/W33VQ424 | Without | Not recorded | CN | Sheet metal | Not recorded | None |
| SKF 22340 CC/W33 | Without | Normal | CN | Sheet metal | Not recorded | None |
| SKF 22340 CC/W33VE194 | Without | Not recorded | CN | Sheet metal | Not recorded | None |
| FAG 22340-BEA-XL-MA1-T41A | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | MA — Solid brass cage | Not recorded | Not recorded |
| FAG 22340-BE-XL | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 22340-BE-XL-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 22340-BE-XL-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 22340-BE-XL-JPA-T41A | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | JPA — Sheet metal cage | Not recorded | Not recorded |
| FAG 22340-BE-XL-K | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 22340-BE-XL-K-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 22340-BE-XL-K-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 22340-BE-XL-K-JPA-T41A | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | JPA — Sheet metal cage | Not recorded | Not recorded |
| TIMKEN 22340EJW33W45A | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22340EJW33W45AC2 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22340EJW33W45AC3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22340EJW33W45AC4 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22340EMBW33W40W45AC3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22340EMBW33W45A | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22340EMBW33W45AC3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22340EMBW33W45AC4 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22340EMBW33W45AW800C4 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22340KEJW33W45A | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22340KEJW33W45AC2 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22340KEJW33W45AC3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22340KEJW33W45AC4 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22340KEMBW33W45A | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22340KEMBW33W45AC2 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22340KEMBW33W45AC3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22340KEMBW33W45AC4 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| NSK 22340CAME4 | Not recorded | Not recorded | CN | Machined brass | Not recorded | Not recorded |
| NSK 22340CAMKE4 | Not recorded | Not recorded | CN | Machined brass | Not recorded | Not recorded |
| KOYO 22340R | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 22340RHA | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 22340RHAK+AH2340 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 22340RHAK+H2340 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 22340RK+AH2340 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 22340RK+H2340 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
SKF
22340-2CS5K/VT143
Spherical roller bearing with tapered bore, integral sealing and relubrication features
View full technical record →FAG22340-BEA-XL-MA1-T41A
Spherical Roller Bearing
View full technical record →FAG22340-BE-XL
Spherical Roller Bearing
View full technical record →FAG22340-BE-XL-C3
Spherical Roller Bearing
View full technical record →FAG22340-BE-XL-C4
Spherical Roller Bearing
View full technical record →FAG22340-BE-XL-JPA-T41A
Spherical Roller Bearing
View full technical record →FAG22340-BE-XL-K
Spherical Roller Bearing
View full technical record →FAG22340-BE-XL-K-C3
Spherical Roller Bearing
View full technical record →FAG22340-BE-XL-K-C4
Spherical Roller Bearing
View full technical record →FAG22340-BE-XL-K-JPA-T41A
Spherical Roller Bearing
View full technical record →NSK22340CAME4
Spherical roller bearing
View full technical record →NSK22340CAMKE4
Spherical roller bearing
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.