Find · understand · compare
22338 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 22338. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
22338 dimensions and recorded technical data
Use the named dimensions for each complete record below. A generic d×D×B answer is not asserted where the base record is missing, dimension symbols are unverified, or the product uses a different geometry such as a housing or thrust assembly. Suffix records are not substituted for a missing base specification.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 43 recorded variants are listed. A dash means the value is missing, not zero.
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF22338 CC/C3W33Spherical roller bearing with relubrication features |
| 2232 kN | 2650 kN | 1200 rpm | 1600 rpm | 78.7 kg78700 g |
| SKF22338 CCJA/W33VA405Spherical roller bearing for vibratory applications, with relubrication features |
| 2232 kN | 2650 kN | 1200 rpm | 1600 rpm | 78.6 kg78600 g |
| SKF22338 CCJA/W33VA406Spherical roller bearing for vibratory applications, with relubrication features |
| 2232 kN | 2650 kN | 1200 rpm | 1600 rpm | 78.6 kg78600 g |
| SKF22338 CCK/C3W33Spherical roller bearing with tapered bore and relubrication features |
| 2232 kN | 2650 kN | 1200 rpm | 1600 rpm | 77 kg77000 g |
| SKF22338 CCK/C4W33Spherical roller bearing with tapered bore and relubrication features |
| 2232 kN | 2650 kN | 1200 rpm | 1600 rpm | 77 kg77000 g |
| SKF22338 CCK/W33Spherical roller bearing with tapered bore and relubrication features |
| 2232 kN | 2650 kN | 1200 rpm | 1600 rpm | 77 kg77000 g |
| SKF22338 CC/W33Spherical roller bearing with relubrication features |
| 2232 kN | 2650 kN | 1200 rpm | 1600 rpm | 78.7 kg78700 g |
| SKF22338 CC/W513Spherical roller bearing with relubrication features |
| 2232 kN | 2650 kN | 1200 rpm | 1600 rpm | 80 kg80000 g |
| FAG22338-BEA-XL-MA1-T41ASpherical Roller Bearing |
| 2220 kN | 2650 kN | 1160 rpm | 1940 rpm | 81.605 kg81605 g |
| FAG22338-BE-XLSpherical Roller Bearing |
| 2220 kN | 2650 kN | 1160 rpm | 1940 rpm | 77.775 kg77775 g |
| FAG22338-BE-XL-C2Spherical Roller Bearing |
| 2220 kN | 2650 kN | 1160 rpm | 1940 rpm | 77.87 kg77870 g |
| FAG22338-BE-XL-C3Spherical Roller Bearing |
| 2220 kN | 2650 kN | 1160 rpm | 1940 rpm | 77.73 kg77730 g |
| FAG22338-BE-XL-C4Spherical Roller Bearing |
| 2220 kN | 2650 kN | 1160 rpm | 1940 rpm | 77.735 kg77735 g |
| FAG22338-BE-XL-JPA-T41ASpherical Roller Bearing |
| 2220 kN | 2650 kN | 1160 rpm | 1940 rpm | 79.455 kg79455 g |
| FAG22338-BE-XL-KSpherical Roller Bearing |
| 2220 kN | 2650 kN | 1160 rpm | 1940 rpm | 76.135 kg76135 g |
| FAG22338-BE-XL-K-C3Spherical Roller Bearing |
| 2220 kN | 2650 kN | 1160 rpm | 1940 rpm | 76.1 kg76100 g |
| FAG22338-BE-XL-K-C4Spherical Roller Bearing |
| 2220 kN | 2650 kN | 1160 rpm | 1940 rpm | 76.14 kg76140 g |
| FAG22338-BE-XL-K-JPA-T41ASpherical Roller Bearing |
| 2220 kN | 2650 kN | 1160 rpm | 1940 rpm | 77.845 kg77845 g |
| TIMKEN22338EJW33Spherical roller bearing |
| 2380 kN | 2830 kN | — | — | 76.39 kg76390 g |
| TIMKEN22338EJW33C2Spherical roller bearing |
| 2380 kN | 2830 kN | — | — | 76.39 kg76390 g |
| TIMKEN22338EJW33C3Spherical roller bearing |
| 2380 kN | 2830 kN | — | — | 76.39 kg76390 g |
| TIMKEN22338EJW33C4Spherical roller bearing |
| 2380 kN | 2830 kN | — | — | 76.39 kg76390 g |
| TIMKEN22338EMBW33Spherical roller bearing |
| 2380 kN | 2830 kN | — | — | 79.53 kg79530 g |
| TIMKEN22338EMBW33C2Spherical roller bearing |
| 2380 kN | 2830 kN | — | — | 79.53 kg79530 g |
| TIMKEN22338EMBW33C3Spherical roller bearing |
| 2380 kN | 2830 kN | — | — | 79.53 kg79530 g |
| TIMKEN22338EMBW33C4Spherical roller bearing |
| 2380 kN | 2830 kN | — | — | 79.53 kg79530 g |
| TIMKEN22338EMBW33W800C3Spherical roller bearing |
| 2380 kN | 2830 kN | — | — | 79.51 kg79510 g |
| TIMKEN22338EMBW33W800C4Spherical roller bearing |
| 2380 kN | 2830 kN | — | — | 79.51 kg79510 g |
| TIMKEN22338KEJW33Spherical roller bearing |
| 2380 kN | 2830 kN | — | — | 74.63 kg74630 g |
| TIMKEN22338KEJW33C2Spherical roller bearing |
| 2380 kN | 2830 kN | — | — | 74.63 kg74630 g |
| TIMKEN22338KEJW33C3Spherical roller bearing |
| 2380 kN | 2830 kN | — | — | 74.63 kg74630 g |
| TIMKEN22338KEJW33C4Spherical roller bearing |
| 2380 kN | 2830 kN | — | — | 74.63 kg74630 g |
| TIMKEN22338KEMBSpherical roller bearing |
| 2380 kN | 2830 kN | — | — | 78.24 kg78240 g |
| TIMKEN22338KEMBW33Spherical roller bearing |
| 2380 kN | 2830 kN | — | — | 77.77 kg77770 g |
| TIMKEN22338KEMBW33C3Spherical roller bearing |
| 2380 kN | 2830 kN | — | — | 77.77 kg77770 g |
| NSK22338CAME4Spherical roller bearing |
| 2370 kN | 2590 kN | — | — | 77.6 kg77600 g |
| NSK22338CAMKE4Spherical roller bearing |
| 2370 kN | 2590 kN | — | — | — |
| KOYO22338RSpherical roller bearing |
| 2380 kN | 2610 kN | — | 880 rpmLimiting Speeds(Grease Lub.): 880 min-1Limiting Speeds(Oil Lub.): 1200 min-1 | 84.1 kg84100 g |
| KOYO22338RHASpherical roller bearing |
| 2430 kN | 2810 kN | — | 870 rpmLimiting Speeds(Grease Lub.): 870 min-1Limiting Speeds(Oil Lub.): 1200 min-1 | 77.7 kg77700 g |
| KOYO22338RHAK+AH2338Spherical roller bearing |
| 2430 kN | 2810 kN | — | 870 rpmLimiting Speeds(Grease Lub.): 870 min-1Limiting Speeds(Oil Lub.): 1200 min-1 | 82.6 kg82600 g |
| KOYO22338RHAK+H2338Spherical roller bearing |
| 2430 kN | 2810 kN | — | 870 rpmLimiting Speeds(Grease Lub.): 870 min-1Limiting Speeds(Oil Lub.): 1200 min-1 | 89.2 kg89200 g |
| KOYO22338RK+AH2338Spherical roller bearing |
| 2380 kN | 2610 kN | — | 880 rpmLimiting Speeds(Grease Lub.): 880 min-1Limiting Speeds(Oil Lub.): 1200 min-1 | 89 kg89000 g |
| KOYO22338RK+H2338Spherical roller bearing |
| 2380 kN | 2610 kN | — | 880 rpmLimiting Speeds(Grease Lub.): 880 min-1Limiting Speeds(Oil Lub.): 1200 min-1 | 95.6 kg95600 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 22338 CC/C3W33 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 22338 CCJA/W33VA405 | Without | Normal, bore to P5 and outside diameter P6 | C4 | Surface-hardened sheet metal | Not recorded | None |
| SKF 22338 CCJA/W33VA406 | Without | Normal, bore to P5 and outside diameter P6 | C4 | Surface-hardened sheet metal | Not recorded | None |
| SKF 22338 CCK/C3W33 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 22338 CCK/C4W33 | Without | Not recorded | C4 | Sheet metal | Not recorded | None |
| SKF 22338 CCK/W33 | Without | Normal | CN | Sheet metal | Not recorded | None |
| SKF 22338 CC/W33 | Without | Normal | CN | Sheet metal | Not recorded | None |
| SKF 22338 CC/W513 | Without | Not recorded | CN | Sheet metal | Not recorded | None |
| FAG 22338-BEA-XL-MA1-T41A | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | MA — Solid brass cage | Not recorded | Not recorded |
| FAG 22338-BE-XL | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 22338-BE-XL-C2 | Not recorded | Not recorded | C2 (Group 2) — Internal clearance smaller than CN | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 22338-BE-XL-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 22338-BE-XL-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 22338-BE-XL-JPA-T41A | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | JPA — Sheet metal cage | Not recorded | Not recorded |
| FAG 22338-BE-XL-K | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 22338-BE-XL-K-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 22338-BE-XL-K-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 22338-BE-XL-K-JPA-T41A | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | JPA — Sheet metal cage | Not recorded | Not recorded |
| TIMKEN 22338EJW33 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22338EJW33C2 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22338EJW33C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22338EJW33C4 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22338EMBW33 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22338EMBW33C2 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22338EMBW33C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22338EMBW33C4 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22338EMBW33W800C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22338EMBW33W800C4 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22338KEJW33 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22338KEJW33C2 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22338KEJW33C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22338KEJW33C4 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22338KEMB | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22338KEMBW33 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22338KEMBW33C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| NSK 22338CAME4 | Not recorded | Not recorded | CN | Machined brass | Not recorded | Not recorded |
| NSK 22338CAMKE4 | Not recorded | Not recorded | CN | Machined brass | Not recorded | Not recorded |
| KOYO 22338R | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 22338RHA | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 22338RHAK+AH2338 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 22338RHAK+H2338 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 22338RK+AH2338 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 22338RK+H2338 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
FAG
22338-BEA-XL-MA1-T41A
Spherical Roller Bearing
View full technical record →FAG22338-BE-XL
Spherical Roller Bearing
View full technical record →FAG22338-BE-XL-C2
Spherical Roller Bearing
View full technical record →FAG22338-BE-XL-C3
Spherical Roller Bearing
View full technical record →FAG22338-BE-XL-C4
Spherical Roller Bearing
View full technical record →FAG22338-BE-XL-JPA-T41A
Spherical Roller Bearing
View full technical record →FAG22338-BE-XL-K
Spherical Roller Bearing
View full technical record →FAG22338-BE-XL-K-C3
Spherical Roller Bearing
View full technical record →FAG22338-BE-XL-K-C4
Spherical Roller Bearing
View full technical record →FAG22338-BE-XL-K-JPA-T41A
Spherical Roller Bearing
View full technical record →NSK22338CAME4
Spherical roller bearing
View full technical record →NSK22338CAMKE4
Spherical roller bearing
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.