Find · understand · compare
22330 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 22330. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
22330 dimensions and recorded technical data
Use the named dimensions for each complete record below. A generic d×D×B answer is not asserted where the base record is missing, dimension symbols are unverified, or the product uses a different geometry such as a housing or thrust assembly. Suffix records are not substituted for a missing base specification.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 59 recorded variants are listed. A dash means the value is missing, not zero.
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF22330-2CS5K/VT143Spherical roller bearing with tapered bore, integral sealing and relubrication features |
| 1541 kN | 1760 kN | — | 730 rpm | 39.8 kg39800 g |
| SKF22330-2CS5/VT143Spherical roller bearing with integral sealing and relubrication features |
| 1541 kN | 1760 kN | — | 730 rpm | 40.3 kg40300 g |
| SKF22330 CC/C3W33Spherical roller bearing with relubrication features |
| 1539 kN | 1760 kN | 1600 rpm | 2000 rpm | 41.7 kg41700 g |
| SKF22330 CC/C3W502Spherical roller bearing with relubrication features |
| 1539 kN | 1760 kN | 1600 rpm | 2000 rpm | 41.7 kg41700 g |
| SKF22330 CC/C3W509Spherical roller bearing with relubrication features |
| 1539 kN | 1760 kN | 1600 rpm | 2000 rpm | 41.7 kg41700 g |
| SKF22330 CC/C4W33Spherical roller bearing with relubrication features |
| 1539 kN | 1760 kN | 1600 rpm | 2000 rpm | 41.7 kg41700 g |
| SKF22330 CCJA/W33VA405Spherical roller bearing for vibratory applications, with relubrication features |
| 1539 kN | 1760 kN | 1600 rpm | 2000 rpm | 41.8 kg41800 g |
| SKF22330 CCJA/W33VA406Spherical roller bearing for vibratory applications, with relubrication features |
| 1539 kN | 1760 kN | 1600 rpm | 2000 rpm | 41.8 kg41800 g |
| SKF22330 CCK/C2W33Spherical roller bearing with tapered bore and relubrication features |
| 1539 kN | 1760 kN | 1600 rpm | 2000 rpm | 40.9 kg40900 g |
| SKF22330 CCK/C3W33Spherical roller bearing with tapered bore and relubrication features |
| 1539 kN | 1760 kN | 1600 rpm | 2000 rpm | 40.9 kg40900 g |
| SKF22330 CCK/C4W33Spherical roller bearing with tapered bore and relubrication features |
| 1539 kN | 1760 kN | 1600 rpm | 2000 rpm | 40.9 kg40900 g |
| SKF22330 CCKJA/W33VA405Spherical roller bearing for vibratory applications, with tapered bore and relubrication features |
| 1539 kN | 1760 kN | 1600 rpm | 2000 rpm | 40.9 kg40900 g |
| SKF22330 CCK/W33Spherical roller bearing with tapered bore and relubrication features |
| 1539 kN | 1760 kN | 1600 rpm | 2000 rpm | 40.9 kg40900 g |
| SKF22330 CC/W33Spherical roller bearing with relubrication features |
| 1539 kN | 1760 kN | 1600 rpm | 2000 rpm | 41.7 kg41700 g |
| FAG22330-E1A-XL-K-MSpherical Roller Bearing |
| 1640 kN | 1850 kN | 1520 rpm | 2290 rpm | 40.1 kg40100 g |
| FAG22330-E1A-XL-K-M-C3Spherical Roller Bearing |
| 1640 kN | 1850 kN | 1520 rpm | 2290 rpm | 40.1 kg40100 g |
| FAG22330-E1A-XL-MSpherical Roller Bearing |
| 1640 kN | 1850 kN | 1520 rpm | 2290 rpm | 42.3 kg42300 g |
| FAG22330-E1A-XL-MA-T41ASpherical Roller Bearing |
| 1640 kN | 1850 kN | 1520 rpm | 2290 rpm | 42.3 kg42300 g |
| FAG22330-E1A-XL-M-C3Spherical Roller Bearing |
| 1640 kN | 1850 kN | 1520 rpm | 2290 rpm | 40 kg40000 g |
| FAG22330-E1A-XL-M-C4Spherical Roller Bearing |
| 1640 kN | 1850 kN | 1520 rpm | 2290 rpm | 41 kg41000 g |
| FAG22330-E1-XLSpherical Roller Bearing |
| 1640 kN | 1850 kN | 1520 rpm | 2290 rpm | 41.335 kg41335 g |
| FAG22330-E1-XL-C3Spherical Roller Bearing |
| 1640 kN | 1850 kN | 1520 rpm | 2290 rpm | 41.287 kg41287 g |
| FAG22330-E1-XL-C4Spherical Roller Bearing |
| 1640 kN | 1850 kN | 1520 rpm | 2290 rpm | 39.5 kg39500 g |
| FAG22330-E1-XL-H151B-C3Spherical Roller Bearing |
| 1640 kN | 1850 kN | 1520 rpm | 2290 rpm | 41.291 kg41291 g |
| FAG22330-E1-XL-KSpherical Roller Bearing |
| 1640 kN | 1850 kN | 1520 rpm | 2290 rpm | 40.447 kg40447 g |
| FAG22330-E1-XL-K-C2Spherical Roller Bearing |
| 1640 kN | 1850 kN | 1520 rpm | 2290 rpm | 40.438 kg40438 g |
| FAG22330-E1-XL-K-C3Spherical Roller Bearing |
| 1640 kN | 1850 kN | 1520 rpm | 2290 rpm | 40.448 kg40448 g |
| FAG22330-E1-XL-K-C4Spherical Roller Bearing |
| 1640 kN | 1850 kN | 1520 rpm | 2290 rpm | 40.415 kg40415 g |
| FAG22330-E1-XL-K-T41ASpherical Roller Bearing |
| 1640 kN | 1850 kN | 1520 rpm | 2290 rpm | 40.422 kg40422 g |
| FAG22330-E1-XL-T41ASpherical Roller Bearing |
| 1640 kN | 1850 kN | 1520 rpm | 2290 rpm | 39.5 kg39500 g |
| FAG22330-E1-XL-T41DSpherical Roller Bearing |
| 1640 kN | 1850 kN | 1520 rpm | 2290 rpm | 41.28 kg41280 g |
| TIMKEN22330EJW33Spherical roller bearing |
| 1620 kN | 1890 kN | — | — | 40.56 kg40560 g |
| TIMKEN22330EJW33C2Spherical roller bearing |
| 1620 kN | 1890 kN | — | — | 40.56 kg40560 g |
| TIMKEN22330EJW33C3Spherical roller bearing |
| 1620 kN | 1890 kN | — | — | 40.56 kg40560 g |
| TIMKEN22330EJW33C3SLASpherical roller bearing |
| 1620 kN | 1890 kN | — | — | 41.61 kg41610 g |
| TIMKEN22330EJW33C4Spherical roller bearing |
| 1620 kN | 1890 kN | — | — | 40.56 kg40560 g |
| TIMKEN22330EJW33W800C4Spherical roller bearing |
| 1620 kN | 1890 kN | — | — | 40.57 kg40570 g |
| TIMKEN22330EMBW33Spherical roller bearing |
| 1620 kN | 1890 kN | — | — | 42.97 kg42970 g |
| TIMKEN22330EMBW33C3Spherical roller bearing |
| 1620 kN | 1890 kN | — | — | 42.97 kg42970 g |
| TIMKEN22330EMBW33C4Spherical roller bearing |
| 1620 kN | 1890 kN | — | — | 42.97 kg42970 g |
| TIMKEN22330EMBW33W800Spherical roller bearing |
| 1620 kN | 1890 kN | — | — | 42.96 kg42960 g |
| TIMKEN22330EMBW33W800C3Spherical roller bearing |
| 1620 kN | 1890 kN | — | — | 42.96 kg42960 g |
| TIMKEN22330EMBW33W800C4Spherical roller bearing |
| 1620 kN | 1890 kN | — | — | 42.96 kg42960 g |
| TIMKEN22330EMBW800W848AC4Spherical roller bearing |
| 1620 kN | 1890 kN | — | — | 42.22 kg42220 g |
| TIMKEN22330KEJW33Spherical roller bearing |
| 1620 kN | 1890 kN | — | — | 39.66 kg39660 g |
| TIMKEN22330KEJW33C3Spherical roller bearing |
| 1620 kN | 1890 kN | — | — | 39.66 kg39660 g |
| TIMKEN22330KEMBW33Spherical roller bearing |
| 1620 kN | 1890 kN | — | — | 41.31 kg41310 g |
| TIMKEN22330KEMBW33C2Spherical roller bearing |
| 1620 kN | 1890 kN | — | — | 41.31 kg41310 g |
| TIMKEN22330KEMBW33C3Spherical roller bearing |
| 1620 kN | 1890 kN | — | — | 41.31 kg41310 g |
| TIMKEN22330KEMBW33C4Spherical roller bearing |
| 1620 kN | 1890 kN | — | — | 41.31 kg41310 g |
| TIMKEN22330KEMBW33W800C4Spherical roller bearing |
| 1620 kN | 1890 kN | — | — | 42.04 kg42040 g |
| NSK22330CAME4Spherical roller bearing |
| 1530 kN | 1690 kN | — | — | 41.5 kg41500 g |
| NSK22330CAMKE4Spherical roller bearing |
| 1530 kN | 1690 kN | — | — | — |
| KOYO22330RSpherical roller bearing |
| 1540 kN | 1600 kN | — | 1200 rpmLimiting Speeds(Grease Lub.): 1200 min-1Limiting Speeds(Oil Lub.): 1500 min-1 | 43.6 kg43600 g |
| KOYO22330RHASpherical roller bearing |
| 1620 kN | 1740 kN | — | 1200 rpmLimiting Speeds(Grease Lub.): 1200 min-1Limiting Speeds(Oil Lub.): 1500 min-1 | 40.3 kg40300 g |
| KOYO22330RHAK+AHX2330Spherical roller bearing |
| 1620 kN | 1740 kN | — | 1200 rpmLimiting Speeds(Grease Lub.): 1200 min-1Limiting Speeds(Oil Lub.): 1500 min-1 | 42.2 kg42200 g |
| KOYO22330RHAK+H2330Spherical roller bearing |
| 1620 kN | 1740 kN | — | 1200 rpmLimiting Speeds(Grease Lub.): 1200 min-1Limiting Speeds(Oil Lub.): 1500 min-1 | 46.4 kg46400 g |
| KOYO22330RK+AHX2330Spherical roller bearing |
| 1540 kN | 1600 kN | — | 1200 rpmLimiting Speeds(Grease Lub.): 1200 min-1Limiting Speeds(Oil Lub.): 1500 min-1 | 45.5 kg45500 g |
| KOYO22330RK+H2330Spherical roller bearing |
| 1540 kN | 1600 kN | — | 1200 rpmLimiting Speeds(Grease Lub.): 1200 min-1Limiting Speeds(Oil Lub.): 1500 min-1 | 49.7 kg49700 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 22330-2CS5K/VT143 | Seal on both sides | Normal | CN | Sheet metal | Not recorded | Grease |
| SKF 22330-2CS5/VT143 | Seal on both sides | Normal | CN | Sheet metal | Not recorded | Grease |
| SKF 22330 CC/C3W33 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 22330 CC/C3W502 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 22330 CC/C3W509 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 22330 CC/C4W33 | Without | Not recorded | C4 | Sheet metal | Not recorded | None |
| SKF 22330 CCJA/W33VA405 | Without | Normal, bore to P5 and outside diameter P6 | C4 | Surface-hardened sheet metal | Not recorded | None |
| SKF 22330 CCJA/W33VA406 | Without | Normal, bore to P5 and outside diameter P6 | C4 | Surface-hardened sheet metal | Not recorded | None |
| SKF 22330 CCK/C2W33 | Without | Not recorded | C2 | Sheet metal | Not recorded | None |
| SKF 22330 CCK/C3W33 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 22330 CCK/C4W33 | Without | Not recorded | C4 | Sheet metal | Not recorded | None |
| SKF 22330 CCKJA/W33VA405 | Without | Normal, bore to P5 and outside diameter P6 | C4 | Surface-hardened sheet metal | Not recorded | None |
| SKF 22330 CCK/W33 | Without | Normal | CN | Sheet metal | Not recorded | None |
| SKF 22330 CC/W33 | Without | Normal | CN | Sheet metal | Not recorded | None |
| FAG 22330-E1A-XL-K-M | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | M — Brass Cage | Not recorded | Not recorded |
| FAG 22330-E1A-XL-K-M-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | M — Brass Cage | Not recorded | Not recorded |
| FAG 22330-E1A-XL-M | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | M — Brass Cage | Not recorded | Not recorded |
| FAG 22330-E1A-XL-MA-T41A | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | MA — Solid brass cage | Not recorded | Not recorded |
| FAG 22330-E1A-XL-M-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | M — Brass Cage | Not recorded | Not recorded |
| FAG 22330-E1A-XL-M-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | M — Brass Cage | Not recorded | Not recorded |
| FAG 22330-E1-XL | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | JPA — Sheet metal cage | Not recorded | Not recorded |
| FAG 22330-E1-XL-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | JPA — Sheet metal cage | Not recorded | Not recorded |
| FAG 22330-E1-XL-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | JPA — Sheet metal cage | Not recorded | Not recorded |
| FAG 22330-E1-XL-H151B-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | JPA — Sheet metal cage | Not recorded | Not recorded |
| FAG 22330-E1-XL-K | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | JPA — Sheet metal cage | Not recorded | Not recorded |
| FAG 22330-E1-XL-K-C2 | Not recorded | Not recorded | C2 (Group 2) — Internal clearance smaller than CN | JPA — Sheet metal cage | Not recorded | Not recorded |
| FAG 22330-E1-XL-K-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | JPA — Sheet metal cage | Not recorded | Not recorded |
| FAG 22330-E1-XL-K-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | JPA — Sheet metal cage | Not recorded | Not recorded |
| FAG 22330-E1-XL-K-T41A | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | JPA — Sheet metal cage | Not recorded | Not recorded |
| FAG 22330-E1-XL-T41A | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | JPA — Sheet metal cage | Not recorded | Not recorded |
| FAG 22330-E1-XL-T41D | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | JPA — Sheet metal cage | Not recorded | Not recorded |
| TIMKEN 22330EJW33 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22330EJW33C2 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22330EJW33C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22330EJW33C3SLA | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22330EJW33C4 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22330EJW33W800C4 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22330EMBW33 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22330EMBW33C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22330EMBW33C4 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22330EMBW33W800 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22330EMBW33W800C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22330EMBW33W800C4 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22330EMBW800W848AC4 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22330KEJW33 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22330KEJW33C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22330KEMBW33 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22330KEMBW33C2 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22330KEMBW33C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22330KEMBW33C4 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22330KEMBW33W800C4 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| NSK 22330CAME4 | Not recorded | Not recorded | CN | Machined brass | Not recorded | Not recorded |
| NSK 22330CAMKE4 | Not recorded | Not recorded | CN | Machined brass | Not recorded | Not recorded |
| KOYO 22330R | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 22330RHA | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 22330RHAK+AHX2330 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 22330RHAK+H2330 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 22330RK+AHX2330 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 22330RK+H2330 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
SKF
22330-2CS5K/VT143
Spherical roller bearing with tapered bore, integral sealing and relubrication features
View full technical record →SKF22330-2CS5/VT143
Spherical roller bearing with integral sealing and relubrication features
View full technical record →NSK22330CAME4
Spherical roller bearing
View full technical record →NSK22330CAMKE4
Spherical roller bearing
View full technical record →SKF22330 CC/C3W33
Spherical roller bearing with relubrication features
View full technical record →SKF22330 CC/C3W502
Spherical roller bearing with relubrication features
View full technical record →SKF22330 CC/C3W509
Spherical roller bearing with relubrication features
View full technical record →SKF22330 CC/C4W33
Spherical roller bearing with relubrication features
View full technical record →SKF22330 CCJA/W33VA405
Spherical roller bearing for vibratory applications, with relubrication features
View full technical record →SKF22330 CCJA/W33VA406
Spherical roller bearing for vibratory applications, with relubrication features
View full technical record →SKF22330 CCK/C2W33
Spherical roller bearing with tapered bore and relubrication features
View full technical record →SKF22330 CCK/C3W33
Spherical roller bearing with tapered bore and relubrication features
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.