99,016 bearing records · search, filter and compare

info@bearingscope.com
Find · understand · compare

22312 bearing dimensions & suffix variants

Look up recorded dimensions for designations beginning with 22312. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.

On this page5 sections

Find by measured dimensions

Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.

For tapered assemblies use total width T; for units or flanged bearings also check the mounting drawing.

Exact model evidence

22312 dimensions and recorded technical data

Use the named dimensions for each complete record below. A generic d×D×B answer is not asserted where the base record is missing, dimension symbols are unverified, or the product uses a different geometry such as a housing or thrust assembly. Suffix records are not substituted for a missing base specification.

The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 52 recorded variants are listed. A dash means the value is missing, not zero.

Brand / full designationNamed dimensions (mm / in)Dynamic C (kN)Static C0 (kN)Reference speed (rpm)Limiting speed (rpm)Mass (kg / g)
SKF22312 ESpherical roller bearing with relubrication features
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
130 mm
5.11811 in
Width (B)
46 mm
1.811024 in
325 kN335 kN4000 rpm5300 rpm2.93 kg2930 g
SKF22312 E/C1Spherical roller bearing with relubrication features
Recorded bore (d)
60 mm
2.362205 in
Recorded outside dimension (D)
130 mm
5.11811 in
Catalogue width (symbol unverified)
46 mm
1.811024 in
325 kN335 kN4000 rpm5300 rpm2.93 kg2930 g
SKF22312 E/C2Spherical roller bearing with relubrication features
Recorded bore (d)
60 mm
2.362205 in
Recorded outside dimension (D)
130 mm
5.11811 in
Catalogue width (symbol unverified)
46 mm
1.811024 in
325 kN335 kN4000 rpm5300 rpm2.93 kg2930 g
SKF22312 E/C3Spherical roller bearing with relubrication features
Recorded bore (d)
60 mm
2.362205 in
Recorded outside dimension (D)
130 mm
5.11811 in
Catalogue width (symbol unverified)
46 mm
1.811024 in
325 kN335 kN4000 rpm5300 rpm2.93 kg2930 g
SKF22312 E/C4Spherical roller bearing with relubrication features
Recorded bore (d)
60 mm
2.362205 in
Recorded outside dimension (D)
130 mm
5.11811 in
Catalogue width (symbol unverified)
46 mm
1.811024 in
325 kN335 kN4000 rpm5300 rpm2.93 kg2930 g
SKF22312 EKSpherical roller bearing with tapered bore and relubrication features
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
130 mm
5.11811 in
Width (B)
46 mm
1.811024 in
325 kN335 kN4000 rpm5300 rpm2.86 kg2860 g
SKF22312 EK/C3Spherical roller bearing with tapered bore and relubrication features
Recorded bore (d)
60 mm
2.362205 in
Recorded outside dimension (D)
130 mm
5.11811 in
Catalogue width (symbol unverified)
46 mm
1.811024 in
325 kN335 kN4000 rpm5300 rpm2.86 kg2860 g
SKF22312 EK/VA405Spherical roller bearing for vibratory applications, with tapered bore and relubrication features
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
130 mm
5.11811 in
Width (B)
46 mm
1.811024 in
325 kN335 kN4000 rpm5300 rpm2.86 kg2860 g
SKF22312 EK/VA751Spherical roller bearing with tapered bore and relubrication features
Recorded bore (d)
60 mm
2.362205 in
Recorded outside dimension (D)
130 mm
5.11811 in
Catalogue width (symbol unverified)
46 mm
1.811024 in
325 kN335 kN4000 rpm5300 rpm2.95 kg2950 g
SKF22312 E/VA405Spherical roller bearing for vibratory applications, with relubrication features
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
130 mm
5.11811 in
Width (B)
46 mm
1.811024 in
325 kN335 kN4000 rpm5300 rpm2.91 kg2910 g
FAG22312-E1A-XL-K-MSpherical Roller Bearing
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
130 mm
5.11811 in
Width (B)
46 mm
1.811024 in
310 kN310 kN4200 rpm5400 rpm2.875 kg2875 g
FAG22312-E1A-XL-K-M-C2Spherical Roller Bearing
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
130 mm
5.11811 in
Width (B)
46 mm
1.811024 in
310 kN310 kN4200 rpm5400 rpm2.91 kg2910 g
FAG22312-E1A-XL-K-M-C3Spherical Roller Bearing
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
130 mm
5.11811 in
Width (B)
46 mm
1.811024 in
310 kN310 kN4200 rpm5400 rpm2.875 kg2875 g
FAG22312-E1A-XL-MSpherical Roller Bearing
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
130 mm
5.11811 in
Width (B)
46 mm
1.811024 in
310 kN310 kN4200 rpm5400 rpm2.875 kg2875 g
FAG22312-E1A-XL-MA-T41ASpherical Roller Bearing
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
130 mm
5.11811 in
Width (B)
46 mm
1.811024 in
310 kN310 kN4200 rpm5400 rpm3.019 kg3019 g
FAG22312-E1A-XL-M-C3Spherical Roller Bearing
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
130 mm
5.11811 in
Width (B)
46 mm
1.811024 in
310 kN310 kN4200 rpm5400 rpm2.935 kg2935 g
FAG22312-E1A-XL-M-C4Spherical Roller Bearing
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
130 mm
5.11811 in
Width (B)
46 mm
1.811024 in
310 kN310 kN4200 rpm5400 rpm2.938 kg2938 g
FAG22312-E1-XLSpherical Roller Bearing
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
130 mm
5.11811 in
Width (B)
46 mm
1.811024 in
310 kN310 kN4200 rpm5400 rpm2.94 kg2940 g
FAG22312-E1-XL-C3Spherical Roller Bearing
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
130 mm
5.11811 in
Width (B)
46 mm
1.811024 in
310 kN310 kN4200 rpm5400 rpm2.94 kg2940 g
FAG22312-E1-XL-C4Spherical Roller Bearing
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
130 mm
5.11811 in
Width (B)
46 mm
1.811024 in
310 kN310 kN4200 rpm5400 rpm2.8 kg2800 g
FAG22312-E1-XL-C5Spherical Roller Bearing
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
130 mm
5.11811 in
Width (B)
46 mm
1.811024 in
310 kN310 kN4200 rpm5400 rpm2.935 kg2935 g
FAG22312-E1-XL-KSpherical Roller Bearing
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
130 mm
5.11811 in
Width (B)
46 mm
1.811024 in
310 kN310 kN4200 rpm5400 rpm2.7 kg2700 g
FAG22312-E1-XL-K-C3Spherical Roller Bearing
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
130 mm
5.11811 in
Width (B)
46 mm
1.811024 in
310 kN310 kN4200 rpm5400 rpm2.7 kg2700 g
FAG22312-E1-XL-K-C4Spherical Roller Bearing
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
130 mm
5.11811 in
Width (B)
46 mm
1.811024 in
310 kN310 kN4200 rpm5400 rpm2.7 kg2700 g
FAG22312-E1-XL-K-T41ASpherical Roller Bearing
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
130 mm
5.11811 in
Width (B)
46 mm
1.811024 in
310 kN310 kN4200 rpm5400 rpm2.7 kg2700 g
FAG22312-E1-XL-T41ASpherical Roller Bearing
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
130 mm
5.11811 in
Width (B)
46 mm
1.811024 in
310 kN310 kN4200 rpm5400 rpm3 kg3000 g
TIMKEN22312EJW33Spherical roller bearing
Recorded bore (d)
60 mm
2.362205 in
Recorded outside dimension (D)
130 mm
5.11811 in
Catalogue width (symbol unverified)
46 mm
1.811024 in
321 kN329 kN——2.87 kg2870 g
TIMKEN22312EJW33C2Spherical roller bearing
Recorded bore (d)
60 mm
2.362205 in
Recorded outside dimension (D)
130 mm
5.11811 in
Catalogue width (symbol unverified)
46 mm
1.811024 in
321 kN329 kN——2.87 kg2870 g
TIMKEN22312EJW33C3Spherical roller bearing
Recorded bore (d)
60 mm
2.362205 in
Recorded outside dimension (D)
130 mm
5.11811 in
Catalogue width (symbol unverified)
46 mm
1.811024 in
321 kN329 kN——2.87 kg2870 g
TIMKEN22312EJW33C4Spherical roller bearing
Recorded bore (d)
60 mm
2.362205 in
Recorded outside dimension (D)
130 mm
5.11811 in
Catalogue width (symbol unverified)
46 mm
1.811024 in
321 kN329 kN——2.87 kg2870 g
TIMKEN22312EJW33C5Spherical roller bearing
Recorded bore (d)
60 mm
2.362205 in
Recorded outside dimension (D)
130 mm
5.11811 in
Catalogue width (symbol unverified)
46 mm
1.811024 in
321 kN329 kN——2.87 kg2870 g
TIMKEN22312EJW33W800C3Spherical roller bearing
Recorded bore (d)
60 mm
2.362205 in
Recorded outside dimension (D)
129.996 mm
5.117953 in
Catalogue width (symbol unverified)
46 mm
1.811024 in
321 kN329 kN——2.86 kg2860 g
TIMKEN22312EJW33W800C4Spherical roller bearing
Recorded bore (d)
60 mm
2.362205 in
Recorded outside dimension (D)
129.996 mm
5.117953 in
Catalogue width (symbol unverified)
46 mm
1.811024 in
321 kN329 kN——2.86 kg2860 g
TIMKEN22312EMW33Spherical roller bearing
Recorded bore (d)
60 mm
2.362205 in
Recorded outside dimension (D)
130 mm
5.11811 in
Catalogue width (symbol unverified)
46 mm
1.811024 in
306 kN307 kN——2.89 kg2890 g
TIMKEN22312EMW33C2Spherical roller bearing
Recorded bore (d)
60 mm
2.362205 in
Recorded outside dimension (D)
130 mm
5.11811 in
Catalogue width (symbol unverified)
46 mm
1.811024 in
306 kN307 kN——2.89 kg2890 g
TIMKEN22312EMW33C3Spherical roller bearing
Recorded bore (d)
60 mm
2.362205 in
Recorded outside dimension (D)
130 mm
5.11811 in
Catalogue width (symbol unverified)
46 mm
1.811024 in
306 kN307 kN——2.89 kg2890 g
TIMKEN22312EMW33C7Spherical roller bearing
Recorded bore (d)
60 mm
2.362205 in
Recorded outside dimension (D)
130 mm
5.11811 in
Catalogue width (symbol unverified)
46 mm
1.811024 in
306 kN307 kN——2.89 kg2890 g
TIMKEN22312EMW33W800Spherical roller bearing
Recorded bore (d)
60 mm
2.362205 in
Recorded outside dimension (D)
129.996 mm
5.117953 in
Catalogue width (symbol unverified)
46 mm
1.811024 in
306 kN307 kN——2.89 kg2890 g
TIMKEN22312EMW33W800C4Spherical roller bearing
Recorded bore (d)
60 mm
2.362205 in
Recorded outside dimension (D)
129.996 mm
5.117953 in
Catalogue width (symbol unverified)
46 mm
1.811024 in
306 kN307 kN——2.89 kg2890 g
TIMKEN22312EMW833C3Spherical roller bearing
Recorded bore (d)
60 mm
2.362205 in
Recorded outside dimension (D)
130 mm
5.11811 in
Catalogue width (symbol unverified)
46 mm
1.811024 in
306 kN307 kN——2.88 kg2880 g
TIMKEN22312EMW841Spherical roller bearing
Recorded bore (d)
60 mm
2.362205 in
Recorded outside dimension (D)
130 mm
5.11811 in
Catalogue width (symbol unverified)
46 mm
1.811024 in
306 kN307 kN——2.92 kg2920 g
TIMKEN22312KEJW33Spherical roller bearing
Recorded bore (d)
60 mm
2.362205 in
Recorded outside dimension (D)
130 mm
5.11811 in
Catalogue width (symbol unverified)
46 mm
1.811024 in
321 kN329 kN——2.8 kg2800 g
TIMKEN22312KEJW33C3Spherical roller bearing
Recorded bore (d)
60 mm
2.362205 in
Recorded outside dimension (D)
130 mm
5.11811 in
Catalogue width (symbol unverified)
46 mm
1.811024 in
321 kN329 kN——2.8 kg2800 g
TIMKEN22312KEMW33Spherical roller bearing
Recorded bore (d)
60 mm
2.362205 in
Recorded outside dimension (D)
130 mm
5.11811 in
Catalogue width (symbol unverified)
46 mm
1.811024 in
306 kN307 kN——2.82 kg2820 g
TIMKEN22312KEMW33C3Spherical roller bearing
Recorded bore (d)
60 mm
2.362205 in
Recorded outside dimension (D)
130 mm
5.11811 in
Catalogue width (symbol unverified)
46 mm
1.811024 in
306 kN307 kN——2.82 kg2820 g
TIMKEN22312KEMW33C4Spherical roller bearing
Recorded bore (d)
60 mm
2.362205 in
Recorded outside dimension (D)
130 mm
5.11811 in
Catalogue width (symbol unverified)
46 mm
1.811024 in
306 kN307 kN——2.82 kg2820 g
TIMKEN22312KEMW33W800C4Spherical roller bearing
Recorded bore (d)
60 mm
2.362205 in
Recorded outside dimension (D)
129.996 mm
5.117953 in
Catalogue width (symbol unverified)
46 mm
1.811024 in
306 kN307 kN——2.82 kg2820 g
NSK22312EAE4Spherical roller bearing
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
130 mm
5.11811 in
Bearing width (B)
46 mm
1.811024 in
340 kN340 kN——2.89 kg2890 g
NSK22312EAKE4Spherical roller bearing
Nominal bore diameter (1:12 taper) (d)
60 mm
2.362205 in
Outside diameter (D)
130 mm
5.11811 in
Bearing width (B)
46 mm
1.811024 in
340 kN340 kN———
KOYO22312RZSpherical roller bearing
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
130 mm
5.11811 in
Width (B)
46 mm
1.811024 in
354 kN334 kN—3900 rpmLimiting Speeds(Grease Lub.): 3900 min-1Limiting Speeds(Oil Lub.): 5100 min-13.06 kg3060 g
KOYO22312RZK+AHX2312Spherical roller bearing
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
130 mm
5.11811 in
Width (B)
46 mm
1.811024 in
354 kN334 kN—3900 rpmLimiting Speeds(Grease Lub.): 3900 min-1Limiting Speeds(Oil Lub.): 5100 min-13.29 kg3290 g
KOYO22312RZK+H2312XSpherical roller bearing
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
130 mm
5.11811 in
Width (B)
46 mm
1.811024 in
354 kN334 kN—3900 rpmLimiting Speeds(Grease Lub.): 3900 min-1Limiting Speeds(Oil Lub.): 5100 min-13.5 kg3500 g
Compare recorded seals, clearance, precision and materials

Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.

Brand / designationClosureOriginal precisionClearanceCageMaterialLubricant
SKF 22312 EWithoutNormalCNSheet metalNot recordedNone
SKF 22312 E/C1WithoutNot recordedC1Sheet metalNot recordedNone
SKF 22312 E/C2WithoutNot recordedC2Sheet metalNot recordedNone
SKF 22312 E/C3WithoutNot recordedC3Sheet metalNot recordedNone
SKF 22312 E/C4WithoutNot recordedC4Sheet metalNot recordedNone
SKF 22312 EKWithoutNormalCNSheet metalNot recordedNone
SKF 22312 EK/C3WithoutNot recordedC3Sheet metalNot recordedNone
SKF 22312 EK/VA405WithoutNormal, bore to P5 and outside diameter P6C4Surface-hardened sheet metalNot recordedNone
SKF 22312 EK/VA751WithoutNot recordedSpecialSheet metalNot recordedNone
SKF 22312 E/VA405WithoutNormal, bore to P5 and outside diameter P6C4Surface-hardened sheet metalNot recordedNone
FAG 22312-E1A-XL-K-MNot recordedNot recordedCN (Group N) — Normal internal clearanceM — Brass CageNot recordedNot recorded
FAG 22312-E1A-XL-K-M-C2Not recordedNot recordedC2 (Group 2) — Internal clearance smaller than CNM — Brass CageNot recordedNot recorded
FAG 22312-E1A-XL-K-M-C3Not recordedNot recordedC3 (Group 3) — Internal clearance larger than CNM — Brass CageNot recordedNot recorded
FAG 22312-E1A-XL-MNot recordedNot recordedCN (Group N) — Normal internal clearanceM — Brass CageNot recordedNot recorded
FAG 22312-E1A-XL-MA-T41ANot recordedNot recordedC4 (Group 4) — Internal clearance larger than C3MA — Solid brass cageNot recordedNot recorded
FAG 22312-E1A-XL-M-C3Not recordedNot recordedC3 (Group 3) — Internal clearance larger than CNM — Brass CageNot recordedNot recorded
FAG 22312-E1A-XL-M-C4Not recordedNot recordedC4 (Group 4) — Internal clearance larger than C3M — Brass CageNot recordedNot recorded
FAG 22312-E1-XLNot recordedNot recordedCN (Group N) — Normal internal clearanceJPA — Sheet metal cageNot recordedNot recorded
FAG 22312-E1-XL-C3Not recordedNot recordedC3 (Group 3) — Internal clearance larger than CNJPA — Sheet metal cageNot recordedNot recorded
FAG 22312-E1-XL-C4Not recordedNot recordedC4 (Group 4) — Internal clearance larger than C3JPA — Sheet metal cageNot recordedNot recorded
FAG 22312-E1-XL-C5Not recordedNot recordedNot recordedJPA — Sheet metal cageNot recordedNot recorded
FAG 22312-E1-XL-KNot recordedNot recordedCN (Group N) — Normal internal clearanceJPA — Sheet metal cageNot recordedNot recorded
FAG 22312-E1-XL-K-C3Not recordedNot recordedC3 (Group 3) — Internal clearance larger than CNJPA — Sheet metal cageNot recordedNot recorded
FAG 22312-E1-XL-K-C4Not recordedNot recordedC4 (Group 4) — Internal clearance larger than C3JPA — Sheet metal cageNot recordedNot recorded
FAG 22312-E1-XL-K-T41ANot recordedNot recordedC4 (Group 4) — Internal clearance larger than C3JPA — Sheet metal cageNot recordedNot recorded
FAG 22312-E1-XL-T41ANot recordedNot recordedC4 (Group 4) — Internal clearance larger than C3JPA — Sheet metal cageNot recordedNot recorded
TIMKEN 22312EJW33OpenNot recordedNot recordedSteel cageNot recordedNot recorded
TIMKEN 22312EJW33C2OpenNot recordedNot recordedSteel cageNot recordedNot recorded
TIMKEN 22312EJW33C3OpenNot recordedNot recordedSteel cageNot recordedNot recorded
TIMKEN 22312EJW33C4OpenNot recordedNot recordedSteel cageNot recordedNot recorded
TIMKEN 22312EJW33C5OpenNot recordedNot recordedSteel cageNot recordedNot recorded
TIMKEN 22312EJW33W800C3OpenNot recordedNot recordedSteel cageNot recordedNot recorded
TIMKEN 22312EJW33W800C4OpenNot recordedNot recordedSteel cageNot recordedNot recorded
TIMKEN 22312EMW33OpenNot recordedNot recordedBrass cageNot recordedNot recorded
TIMKEN 22312EMW33C2OpenNot recordedNot recordedBrass cageNot recordedNot recorded
TIMKEN 22312EMW33C3OpenNot recordedNot recordedBrass cageNot recordedNot recorded
TIMKEN 22312EMW33C7OpenNot recordedNot recordedBrass cageNot recordedNot recorded
TIMKEN 22312EMW33W800OpenNot recordedNot recordedBrass cageNot recordedNot recorded
TIMKEN 22312EMW33W800C4OpenNot recordedNot recordedBrass cageNot recordedNot recorded
TIMKEN 22312EMW833C3OpenNot recordedNot recordedBrass cageNot recordedNot recorded
TIMKEN 22312EMW841OpenNot recordedNot recordedBrass cageNot recordedNot recorded
TIMKEN 22312KEJW33OpenNot recordedNot recordedSteel cageNot recordedNot recorded
TIMKEN 22312KEJW33C3OpenNot recordedNot recordedSteel cageNot recordedNot recorded
TIMKEN 22312KEMW33OpenNot recordedNot recordedBrass cageNot recordedNot recorded
TIMKEN 22312KEMW33C3OpenNot recordedNot recordedBrass cageNot recordedNot recorded
TIMKEN 22312KEMW33C4OpenNot recordedNot recordedBrass cageNot recordedNot recorded
TIMKEN 22312KEMW33W800C4OpenNot recordedNot recordedBrass cageNot recordedNot recorded
NSK 22312EAE4Not recordedNot recordedCNPressed steelNot recordedNot recorded
NSK 22312EAKE4Not recordedNot recordedCNPressed steelNot recordedNot recorded
KOYO 22312RZNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 22312RZK+AHX2312Not recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 22312RZK+H2312XNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded

How to compare these values

  • Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
  • Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
  • C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
  • Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
  • A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Check load calculations →Estimate rating life →Decode the complete marking →Check replacement evidence →

Related prefix matches — other model numbers may appear

These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.

SKF

22312 E

Spherical roller bearing with relubrication features

View full technical record →FAG

22312-E1A-XL-K-M

Spherical Roller Bearing

View full technical record →FAG

22312-E1A-XL-K-M-C2

Spherical Roller Bearing

View full technical record →FAG

22312-E1A-XL-K-M-C3

Spherical Roller Bearing

View full technical record →FAG

22312-E1A-XL-M

Spherical Roller Bearing

View full technical record →FAG

22312-E1A-XL-MA-T41A

Spherical Roller Bearing

View full technical record →FAG

22312-E1A-XL-M-C3

Spherical Roller Bearing

View full technical record →FAG

22312-E1A-XL-M-C4

Spherical Roller Bearing

View full technical record →FAG

22312-E1-XL

Spherical Roller Bearing

View full technical record →FAG

22312-E1-XL-C3

Spherical Roller Bearing

View full technical record →FAG

22312-E1-XL-C4

Spherical Roller Bearing

View full technical record →FAG

22312-E1-XL-C5

Spherical Roller Bearing

View full technical record →
Filter all 52 prefix results →

Check the drawing before substituting

Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.

Measurement guide →Cross-reference checks →

Reference basis & data limits

Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.

Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.

Search the consolidated catalogue

Find, filter and compare bearing model data in one place.

Open model search