22252 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 22252. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
22252 dimensions and recorded technical data
Use the named dimensions for each complete record below. A generic d×D×B answer is not asserted where the base record is missing, dimension symbols are unverified, or the product uses a different geometry such as a housing or thrust assembly. Suffix records are not substituted for a missing base specification.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 24 recorded variants are listed. A dash means the value is missing, not zero.
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF22252 CAC/C3W33Spherical roller bearing with relubrication features |
| 2722 kN | 3550 kN | 1200 rpm | 1600 rpm | 104 kg104000 g |
| SKF22252 CACK/C3W33Spherical roller bearing with tapered bore and relubrication features |
| 2722 kN | 3550 kN | 1200 rpm | 1600 rpm | 102 kg102000 g |
| SKF22252 CACK/W33Spherical roller bearing with tapered bore and relubrication features |
| 2722 kN | 3550 kN | 1200 rpm | 1600 rpm | 102 kg102000 g |
| SKF22252 CAC/W33Spherical roller bearing with relubrication features |
| 2722 kN | 3550 kN | 1200 rpm | 1600 rpm | 104 kg104000 g |
| SKF22252 CCK/C3W33Spherical roller bearing with tapered bore and relubrication features |
| 2722 kN | 3550 kN | 1200 rpm | 1600 rpm | 99.8 kg99800 g |
| SKF22252 CCK/W33Spherical roller bearing with tapered bore and relubrication features |
| 2722 kN | 3550 kN | 1200 rpm | 1600 rpm | 99.8 kg99800 g |
| SKF22252 CC/W33Spherical roller bearing with relubrication features |
| 2722 kN | 3550 kN | 1200 rpm | 1600 rpm | 102 kg102000 g |
| FAG22252-BEA-XL-K-MB1Spherical Roller Bearing |
| 2600 kN | 3450 kN | 1070 rpm | 1720 rpm | 101.01 kg101010 g |
| FAG22252-BEA-XL-K-MB1-C3Spherical Roller Bearing |
| 2600 kN | 3450 kN | 1070 rpm | 1720 rpm | 101.025 kg101025 g |
| FAG22252-BEA-XL-MB1Spherical Roller Bearing |
| 2600 kN | 3450 kN | 1070 rpm | 1720 rpm | 103.125 kg103125 g |
| FAG22252-BEA-XL-MB1-C3Spherical Roller Bearing |
| 2600 kN | 3450 kN | 1070 rpm | 1720 rpm | 103.1 kg103100 g |
| TIMKEN22252EMBW33W45ASpherical roller bearing |
| 2510 kN | 3500 kN | — | — | 105.31 kg105310 g |
| TIMKEN22252EMBW33W45AC3Spherical roller bearing |
| 2510 kN | 3500 kN | — | — | 105.31 kg105310 g |
| TIMKEN22252EMBW89Spherical roller bearing |
| 2510 kN | 3500 kN | — | — | 105.9 kg105900 g |
| TIMKEN22252KEMBW33W45ASpherical roller bearing |
| 2510 kN | 3500 kN | — | — | 102.99 kg102990 g |
| TIMKEN22252KEMBW33W45AC3Spherical roller bearing |
| 2510 kN | 3500 kN | — | — | 102.99 kg102990 g |
| NSK22252CAME4Spherical roller bearing |
| 2720 kN | 3400 kN | — | — | 104 kg104000 g |
| NSK22252CAMKE4Spherical roller bearing |
| 2720 kN | 3400 kN | — | — | — |
| KOYO22252RSpherical roller bearing |
| 2800 kN | 3460 kN | — | 650 rpmLimiting Speeds(Grease Lub.): 650 min-1Limiting Speeds(Oil Lub.): 870 min-1 | 110 kg110000 g |
| KOYO22252RHASpherical roller bearing |
| 2790 kN | 3430 kN | — | 650 rpmLimiting Speeds(Grease Lub.): 650 min-1Limiting Speeds(Oil Lub.): 870 min-1 | 103 kg103000 g |
| KOYO22252RHAK+AH2252Spherical roller bearing |
| 2790 kN | 3430 kN | — | 650 rpmLimiting Speeds(Grease Lub.): 650 min-1Limiting Speeds(Oil Lub.): 870 min-1 | 115 kg115000 g |
| KOYO22252RHAK+H3152Spherical roller bearing |
| 2790 kN | 3430 kN | — | 650 rpmLimiting Speeds(Grease Lub.): 650 min-1Limiting Speeds(Oil Lub.): 870 min-1 | 124 kg124000 g |
| KOYO22252RK+AH2252Spherical roller bearing |
| 2800 kN | 3460 kN | — | 650 rpmLimiting Speeds(Grease Lub.): 650 min-1Limiting Speeds(Oil Lub.): 870 min-1 | 122 kg122000 g |
| KOYO22252RK+H3152Spherical roller bearing |
| 2800 kN | 3460 kN | — | 650 rpmLimiting Speeds(Grease Lub.): 650 min-1Limiting Speeds(Oil Lub.): 870 min-1 | 131 kg131000 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 22252 CAC/C3W33 | Without | Not recorded | C3 | Machined brass | Not recorded | None |
| SKF 22252 CACK/C3W33 | Without | Not recorded | C3 | Machined brass | Not recorded | None |
| SKF 22252 CACK/W33 | Without | Normal | CN | Machined brass | Not recorded | None |
| SKF 22252 CAC/W33 | Without | Normal | CN | Machined brass | Not recorded | None |
| SKF 22252 CCK/C3W33 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 22252 CCK/W33 | Without | Normal | CN | Sheet metal | Not recorded | None |
| SKF 22252 CC/W33 | Without | Normal | CN | Sheet metal | Not recorded | None |
| FAG 22252-BEA-XL-K-MB1 | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | MB1 — Solid brass cage | Not recorded | Not recorded |
| FAG 22252-BEA-XL-K-MB1-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | MB1 — Solid brass cage | Not recorded | Not recorded |
| FAG 22252-BEA-XL-MB1 | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | MB1 — Solid brass cage | Not recorded | Not recorded |
| FAG 22252-BEA-XL-MB1-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | MB1 — Solid brass cage | Not recorded | Not recorded |
| TIMKEN 22252EMBW33W45A | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22252EMBW33W45AC3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22252EMBW89 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22252KEMBW33W45A | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22252KEMBW33W45AC3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| NSK 22252CAME4 | Not recorded | Not recorded | CN | Machined brass | Not recorded | Not recorded |
| NSK 22252CAMKE4 | Not recorded | Not recorded | CN | Machined brass | Not recorded | Not recorded |
| KOYO 22252R | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 22252RHA | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 22252RHAK+AH2252 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 22252RHAK+H3152 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 22252RK+AH2252 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 22252RK+H3152 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
22252-BEA-XL-K-MB1
Spherical Roller Bearing
View full technical record →FAG22252-BEA-XL-K-MB1-C3
Spherical Roller Bearing
View full technical record →FAG22252-BEA-XL-MB1
Spherical Roller Bearing
View full technical record →FAG22252-BEA-XL-MB1-C3
Spherical Roller Bearing
View full technical record →SKF22252 CAC/C3W33
Spherical roller bearing with relubrication features
View full technical record →SKF22252 CACK/C3W33
Spherical roller bearing with tapered bore and relubrication features
View full technical record →SKF22252 CACK/W33
Spherical roller bearing with tapered bore and relubrication features
View full technical record →SKF22252 CAC/W33
Spherical roller bearing with relubrication features
View full technical record →NSK22252CAME4
Spherical roller bearing
View full technical record →NSK22252CAMKE4
Spherical roller bearing
View full technical record →SKF22252 CCK/C3W33
Spherical roller bearing with tapered bore and relubrication features
View full technical record →SKF22252 CCK/W33
Spherical roller bearing with tapered bore and relubrication features
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.