Find · understand · compare
22248 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 22248. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
22248 dimensions and recorded technical data
Use the named dimensions for each complete record below. A generic d×D×B answer is not asserted where the base record is missing, dimension symbols are unverified, or the product uses a different geometry such as a housing or thrust assembly. Suffix records are not substituted for a missing base specification.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 34 recorded variants are listed. A dash means the value is missing, not zero.
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF22248 CC/C3W33Spherical roller bearing with relubrication features |
| 2258 kN | 3000 kN | 1300 rpm | 1800 rpm | 79.3 kg79300 g |
| SKF22248 CCK/C3W33Spherical roller bearing with tapered bore and relubrication features |
| 2258 kN | 3000 kN | 1300 rpm | 1800 rpm | 77.5 kg77500 g |
| SKF22248 CCK/C482W507Spherical roller bearing with tapered bore and relubrication features |
| 2258 kN | 3000 kN | 1300 rpm | 1800 rpm | 78 kg78000 g |
| SKF22248 CCK/W33Spherical roller bearing with tapered bore and relubrication features |
| 2258 kN | 3000 kN | 1300 rpm | 1800 rpm | 77.5 kg77500 g |
| SKF22248 CC/W33Spherical roller bearing with relubrication features |
| 2258 kN | 3000 kN | 1300 rpm | 1800 rpm | 79.3 kg79300 g |
| FAG22248-BE-XLSpherical Roller Bearing |
| 2230 kN | 2900 kN | 1200 rpm | 1900 rpm | 78.73 kg78730 g |
| FAG22248-BE-XL-C3Spherical Roller Bearing |
| 2230 kN | 2900 kN | 1200 rpm | 1900 rpm | 78.65 kg78650 g |
| FAG22248-BE-XL-C4Spherical Roller Bearing |
| 2230 kN | 2900 kN | 1200 rpm | 1900 rpm | 79 kg79000 g |
| FAG22248-BE-XL-H151-C3Spherical Roller Bearing |
| 2230 kN | 2900 kN | 1200 rpm | 1900 rpm | 78.73 kg78730 g |
| FAG22248-BE-XL-KSpherical Roller Bearing |
| 2230 kN | 2900 kN | 1200 rpm | 1900 rpm | 77 kg77000 g |
| FAG22248-BE-XL-K-C3Spherical Roller Bearing |
| 2230 kN | 2900 kN | 1200 rpm | 1900 rpm | 76.965 kg76965 g |
| FAG22248-BE-XL-K-C4Spherical Roller Bearing |
| 2230 kN | 2900 kN | 1200 rpm | 1900 rpm | 76.85 kg76850 g |
| TIMKEN22248EJW33W45ASpherical roller bearing |
| 2330 kN | 2950 kN | — | — | 77.4 kg77400 g |
| TIMKEN22248EJW33W45AC2Spherical roller bearing |
| 2330 kN | 2950 kN | — | — | 77.4 kg77400 g |
| TIMKEN22248EJW33W45AC3Spherical roller bearing |
| 2330 kN | 2950 kN | — | — | 77.4 kg77400 g |
| TIMKEN22248EJW33W45AC4Spherical roller bearing |
| 2330 kN | 2950 kN | — | — | 77.4 kg77400 g |
| TIMKEN22248EMBW33W45ASpherical roller bearing |
| 2330 kN | 2950 kN | — | — | 80.98 kg80980 g |
| TIMKEN22248EMBW33W45AC3Spherical roller bearing |
| 2330 kN | 2950 kN | — | — | 80.98 kg80980 g |
| TIMKEN22248KEJW33W45ASpherical roller bearing |
| 2330 kN | 2950 kN | — | — | 75.46 kg75460 g |
| TIMKEN22248KEJW33W45AC2Spherical roller bearing |
| 2330 kN | 2950 kN | — | — | 75.46 kg75460 g |
| TIMKEN22248KEJW33W45AC3Spherical roller bearing |
| 2330 kN | 2950 kN | — | — | 75.46 kg75460 g |
| TIMKEN22248KEJW33W45AC4Spherical roller bearing |
| 2330 kN | 2950 kN | — | — | 75.46 kg75460 g |
| TIMKEN22248KEMBW33W45ASpherical roller bearing |
| 2330 kN | 2950 kN | — | — | 79.1 kg79100 g |
| TIMKEN22248KEMBW33W45AC2Spherical roller bearing |
| 2330 kN | 2950 kN | — | — | 79.1 kg79100 g |
| TIMKEN22248KEMBW33W45AC3Spherical roller bearing |
| 2330 kN | 2950 kN | — | — | 79.1 kg79100 g |
| TIMKEN22248KEMBW33W45AC7Spherical roller bearing |
| 2330 kN | 2950 kN | — | — | 79.1 kg79100 g |
| NSK22248CAME4Spherical roller bearing |
| 2340 kN | 2890 kN | — | — | 80.2 kg80200 g |
| NSK22248CAMKE4Spherical roller bearing |
| 2340 kN | 2890 kN | — | — | — |
| KOYO22248RSpherical roller bearing |
| 2390 kN | 2940 kN | — | 730 rpmLimiting Speeds(Grease Lub.): 730 min-1Limiting Speeds(Oil Lub.): 970 min-1 | 85 kg85000 g |
| KOYO22248RHASpherical roller bearing |
| 2400 kN | 2990 kN | — | 730 rpmLimiting Speeds(Grease Lub.): 730 min-1Limiting Speeds(Oil Lub.): 970 min-1 | 79.4 kg79400 g |
| KOYO22248RHAK+AH2248Spherical roller bearing |
| 2400 kN | 2990 kN | — | 730 rpmLimiting Speeds(Grease Lub.): 730 min-1Limiting Speeds(Oil Lub.): 970 min-1 | 88.7 kg88700 g |
| KOYO22248RHAK+H3148Spherical roller bearing |
| 2400 kN | 2990 kN | — | 730 rpmLimiting Speeds(Grease Lub.): 730 min-1Limiting Speeds(Oil Lub.): 970 min-1 | 95.6 kg95600 g |
| KOYO22248RK+AH2248Spherical roller bearing |
| 2390 kN | 2940 kN | — | 730 rpmLimiting Speeds(Grease Lub.): 730 min-1Limiting Speeds(Oil Lub.): 970 min-1 | 94.3 kg94300 g |
| KOYO22248RK+H3148Spherical roller bearing |
| 2390 kN | 2940 kN | — | 730 rpmLimiting Speeds(Grease Lub.): 730 min-1Limiting Speeds(Oil Lub.): 970 min-1 | 101 kg101000 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 22248 CC/C3W33 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 22248 CCK/C3W33 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 22248 CCK/C482W507 | Without | Not recorded | C2 | Sheet metal | Not recorded | None |
| SKF 22248 CCK/W33 | Without | Normal | CN | Sheet metal | Not recorded | None |
| SKF 22248 CC/W33 | Without | Normal | CN | Sheet metal | Not recorded | None |
| FAG 22248-BE-XL | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 22248-BE-XL-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 22248-BE-XL-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 22248-BE-XL-H151-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 22248-BE-XL-K | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 22248-BE-XL-K-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 22248-BE-XL-K-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | JPB — Sheet metal cage | Not recorded | Not recorded |
| TIMKEN 22248EJW33W45A | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22248EJW33W45AC2 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22248EJW33W45AC3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22248EJW33W45AC4 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22248EMBW33W45A | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22248EMBW33W45AC3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22248KEJW33W45A | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22248KEJW33W45AC2 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22248KEJW33W45AC3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22248KEJW33W45AC4 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22248KEMBW33W45A | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22248KEMBW33W45AC2 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22248KEMBW33W45AC3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22248KEMBW33W45AC7 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| NSK 22248CAME4 | Not recorded | Not recorded | CN | Machined brass | Not recorded | Not recorded |
| NSK 22248CAMKE4 | Not recorded | Not recorded | CN | Machined brass | Not recorded | Not recorded |
| KOYO 22248R | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 22248RHA | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 22248RHAK+AH2248 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 22248RHAK+H3148 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 22248RK+AH2248 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 22248RK+H3148 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
FAG
22248-BE-XL
Spherical Roller Bearing
View full technical record →FAG22248-BE-XL-C3
Spherical Roller Bearing
View full technical record →FAG22248-BE-XL-C4
Spherical Roller Bearing
View full technical record →FAG22248-BE-XL-H151-C3
Spherical Roller Bearing
View full technical record →FAG22248-BE-XL-K
Spherical Roller Bearing
View full technical record →FAG22248-BE-XL-K-C3
Spherical Roller Bearing
View full technical record →FAG22248-BE-XL-K-C4
Spherical Roller Bearing
View full technical record →NSK22248CAME4
Spherical roller bearing
View full technical record →NSK22248CAMKE4
Spherical roller bearing
View full technical record →SKF22248 CC/C3W33
Spherical roller bearing with relubrication features
View full technical record →SKF22248 CCK/C3W33
Spherical roller bearing with tapered bore and relubrication features
View full technical record →SKF22248 CCK/C482W507
Spherical roller bearing with tapered bore and relubrication features
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.