Find · understand · compare
22244 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 22244. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
22244 dimensions and recorded technical data
Use the named dimensions for each complete record below. A generic d×D×B answer is not asserted where the base record is missing, dimension symbols are unverified, or the product uses a different geometry such as a housing or thrust assembly. Suffix records are not substituted for a missing base specification.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 44 recorded variants are listed. A dash means the value is missing, not zero.
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF22244-2CS5K/VT143Spherical roller bearing with tapered bore, integral sealing and relubrication features |
| 1839 kN | 2360 kN | — | 520 rpm | 57.9 kg57900 g |
| SKF22244-2CS5/VT143Spherical roller bearing with integral sealing and relubrication features |
| 1839 kN | 2360 kN | — | 520 rpm | 58.4 kg58400 g |
| SKF22244 CC/C3W33Spherical roller bearing with relubrication features |
| 1835 kN | 2360 kN | 1500 rpm | 2000 rpm | 58.8 kg58800 g |
| SKF22244 CCK/C3W33Spherical roller bearing with tapered bore and relubrication features |
| 1835 kN | 2360 kN | 1500 rpm | 2000 rpm | 57.7 kg57700 g |
| SKF22244 CCK/C403W33Spherical roller bearing with tapered bore and relubrication features |
| 1835 kN | 2360 kN | 1500 rpm | 2000 rpm | 57.7 kg57700 g |
| SKF22244 CCK/C403W73Spherical roller bearing |
| 1835 kN | 2360 kN | 1500 rpm | 2000 rpm | 57.7 kg57700 g |
| SKF22244 CCK/C4W33Spherical roller bearing with tapered bore and relubrication features |
| 1835 kN | 2360 kN | 1500 rpm | 2000 rpm | 57.7 kg57700 g |
| SKF22244 CCK/HA3C4W33Spherical roller bearing with tapered bore and relubrication features |
| 1835 kN | 2360 kN | 1500 rpm | 2000 rpm | 57.7 kg57700 g |
| SKF22244 CCK/W33Spherical roller bearing with tapered bore and relubrication features |
| 1835 kN | 2360 kN | 1500 rpm | 2000 rpm | 57.7 kg57700 g |
| SKF22244 CC/W33Spherical roller bearing with relubrication features |
| 1835 kN | 2360 kN | 1500 rpm | 2000 rpm | 58.8 kg58800 g |
| FAG22244-BE-XLSpherical Roller Bearing |
| 1840 kN | 2360 kN | 1350 rpm | 2140 rpm | 57.7 kg57700 g |
| FAG22244-BE-XL-C3Spherical Roller Bearing |
| 1840 kN | 2360 kN | 1350 rpm | 2140 rpm | 57.7 kg57700 g |
| FAG22244-BE-XL-C4Spherical Roller Bearing |
| 1840 kN | 2360 kN | 1350 rpm | 2140 rpm | 58.375 kg58375 g |
| FAG22244-BE-XL-H151Spherical Roller Bearing |
| 1840 kN | 2360 kN | 1350 rpm | 2140 rpm | 57.7 kg57700 g |
| FAG22244-BE-XL-H151-C3Spherical Roller Bearing |
| 1840 kN | 2360 kN | 1350 rpm | 2140 rpm | 57.7 kg57700 g |
| FAG22244-BE-XL-KSpherical Roller Bearing |
| 1840 kN | 2360 kN | 1350 rpm | 2140 rpm | 57.9 kg57900 g |
| FAG22244-BE-XL-K-C3Spherical Roller Bearing |
| 1840 kN | 2360 kN | 1350 rpm | 2140 rpm | 57.9 kg57900 g |
| FAG22244-BE-XL-K-C4Spherical Roller Bearing |
| 1840 kN | 2360 kN | 1350 rpm | 2140 rpm | 57.09 kg57090 g |
| TIMKEN22244EJW33Spherical roller bearing |
| 1850 kN | 2310 kN | — | — | 56.48 kg56480 g |
| TIMKEN22244EJW33C3Spherical roller bearing |
| 1850 kN | 2310 kN | — | — | 56.48 kg56480 g |
| TIMKEN22244EJW33C4Spherical roller bearing |
| 1850 kN | 2310 kN | — | — | 56.48 kg56480 g |
| TIMKEN22244EMBW33Spherical roller bearing |
| 1850 kN | 2310 kN | — | — | 59.43 kg59430 g |
| TIMKEN22244EMBW33C2Spherical roller bearing |
| 1850 kN | 2310 kN | — | — | 59.43 kg59430 g |
| TIMKEN22244EMBW33C3Spherical roller bearing |
| 1850 kN | 2310 kN | — | — | 59.43 kg59430 g |
| TIMKEN22244EMBW33C4Spherical roller bearing |
| 1850 kN | 2310 kN | — | — | 59.43 kg59430 g |
| TIMKEN22244EMBW507C08Spherical roller bearing |
| 1850 kN | 2310 kN | — | — | 59.43 kg59430 g |
| TIMKEN22244EMBW507C08C3Spherical roller bearing |
| 1850 kN | 2310 kN | — | — | 59.43 kg59430 g |
| TIMKEN22244KEJW507C08Spherical roller bearing |
| 1850 kN | 2310 kN | — | — | 55.1 kg55100 g |
| TIMKEN22244KEMBW33Spherical roller bearing |
| 1850 kN | 2310 kN | — | — | 58.08 kg58080 g |
| TIMKEN22244KEMBW33C3Spherical roller bearing |
| 1850 kN | 2310 kN | — | — | 58.08 kg58080 g |
| TIMKEN22244KEMBW33C4Spherical roller bearing |
| 1850 kN | 2310 kN | — | — | 58.08 kg58080 g |
| TIMKEN22244KEMBW40IW534Spherical roller bearing |
| 1850 kN | 2310 kN | — | — | 58.08 kg58080 g |
| TIMKEN22244KEMBW40IW534C4Spherical roller bearing |
| 1850 kN | 2310 kN | — | — | 58.08 kg58080 g |
| TIMKEN22244KEMBW507C08Spherical roller bearing |
| 1850 kN | 2310 kN | — | — | 58.08 kg58080 g |
| TIMKEN22244KEMBW507C08C3Spherical roller bearing |
| 1850 kN | 2310 kN | — | — | 58.08 kg58080 g |
| TIMKEN22244KEMBW507C08C4Spherical roller bearing |
| 1850 kN | 2310 kN | — | — | 58.08 kg58080 g |
| NSK22244CAME4Spherical roller bearing |
| 1960 kN | 2430 kN | — | — | 59 kg59000 g |
| NSK22244CAMKE4Spherical roller bearing |
| 1960 kN | 2430 kN | — | — | — |
| KOYO22244RHASpherical roller bearing |
| 1980 kN | 2440 kN | — | 820 rpmLimiting Speeds(Grease Lub.): 820 min-1Limiting Speeds(Oil Lub.): 1100 min-1 | 58.8 kg58800 g |
| KOYO22244RHAK+AH2244Spherical roller bearing |
| 1980 kN | 2440 kN | — | 820 rpmLimiting Speeds(Grease Lub.): 820 min-1Limiting Speeds(Oil Lub.): 1100 min-1 | 66.6 kg66600 g |
| KOYO22244RHAK+H3144Spherical roller bearing |
| 1980 kN | 2440 kN | — | 820 rpmLimiting Speeds(Grease Lub.): 820 min-1Limiting Speeds(Oil Lub.): 1100 min-1 | 72.7 kg72700 g |
| KOYO22244RRSpherical roller bearing |
| 2000 kN | 2410 kN | — | 820 rpmLimiting Speeds(Grease Lub.): 820 min-1Limiting Speeds(Oil Lub.): 1100 min-1 | 60.3 kg60300 g |
| KOYO22244RRK+AH2244Spherical roller bearing |
| 2000 kN | 2410 kN | — | 820 rpmLimiting Speeds(Grease Lub.): 820 min-1Limiting Speeds(Oil Lub.): 1100 min-1 | 70.8 kg70800 g |
| KOYO22244RRK+H3144Spherical roller bearing |
| 2000 kN | 2410 kN | — | 820 rpmLimiting Speeds(Grease Lub.): 820 min-1Limiting Speeds(Oil Lub.): 1100 min-1 | 76.9 kg76900 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 22244-2CS5K/VT143 | Seal on both sides | Normal | CN | Sheet metal | Not recorded | Grease |
| SKF 22244-2CS5/VT143 | Seal on both sides | Normal | CN | Sheet metal | Not recorded | Grease |
| SKF 22244 CC/C3W33 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 22244 CCK/C3W33 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 22244 CCK/C403W33 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 22244 CCK/C403W73 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 22244 CCK/C4W33 | Without | Not recorded | C4 | Sheet metal | Not recorded | None |
| SKF 22244 CCK/HA3C4W33 | Without | Not recorded | C4 | Sheet metal | Not recorded | None |
| SKF 22244 CCK/W33 | Without | Normal | CN | Sheet metal | Not recorded | None |
| SKF 22244 CC/W33 | Without | Normal | CN | Sheet metal | Not recorded | None |
| FAG 22244-BE-XL | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 22244-BE-XL-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 22244-BE-XL-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 22244-BE-XL-H151 | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 22244-BE-XL-H151-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 22244-BE-XL-K | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 22244-BE-XL-K-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 22244-BE-XL-K-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | JPB — Sheet metal cage | Not recorded | Not recorded |
| TIMKEN 22244EJW33 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22244EJW33C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22244EJW33C4 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22244EMBW33 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22244EMBW33C2 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22244EMBW33C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22244EMBW33C4 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22244EMBW507C08 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22244EMBW507C08C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22244KEJW507C08 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22244KEMBW33 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22244KEMBW33C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22244KEMBW33C4 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22244KEMBW40IW534 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22244KEMBW40IW534C4 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22244KEMBW507C08 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22244KEMBW507C08C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22244KEMBW507C08C4 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| NSK 22244CAME4 | Not recorded | Not recorded | CN | Machined brass | Not recorded | Not recorded |
| NSK 22244CAMKE4 | Not recorded | Not recorded | CN | Machined brass | Not recorded | Not recorded |
| KOYO 22244RHA | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 22244RHAK+AH2244 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 22244RHAK+H3144 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 22244RR | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 22244RRK+AH2244 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 22244RRK+H3144 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
SKF
22244-2CS5K/VT143
Spherical roller bearing with tapered bore, integral sealing and relubrication features
View full technical record →SKF22244-2CS5/VT143
Spherical roller bearing with integral sealing and relubrication features
View full technical record →FAG22244-BE-XL
Spherical Roller Bearing
View full technical record →FAG22244-BE-XL-C3
Spherical Roller Bearing
View full technical record →FAG22244-BE-XL-C4
Spherical Roller Bearing
View full technical record →FAG22244-BE-XL-H151
Spherical Roller Bearing
View full technical record →FAG22244-BE-XL-H151-C3
Spherical Roller Bearing
View full technical record →FAG22244-BE-XL-K
Spherical Roller Bearing
View full technical record →FAG22244-BE-XL-K-C3
Spherical Roller Bearing
View full technical record →FAG22244-BE-XL-K-C4
Spherical Roller Bearing
View full technical record →NSK22244CAME4
Spherical roller bearing
View full technical record →NSK22244CAMKE4
Spherical roller bearing
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.