Find · understand · compare
22240 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 22240. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
22240 dimensions and recorded technical data
Use the named dimensions for each complete record below. A generic d×D×B answer is not asserted where the base record is missing, dimension symbols are unverified, or the product uses a different geometry such as a housing or thrust assembly. Suffix records are not substituted for a missing base specification.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 36 recorded variants are listed. A dash means the value is missing, not zero.
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF22240-2CS5K/VT143Spherical roller bearing with tapered bore, integral sealing and relubrication features |
| 1529 kN | 1930 kN | — | 570 rpm | 41.8 kg41800 g |
| SKF22240-2CS5/VT143Spherical roller bearing with integral sealing and relubrication features |
| 1529 kN | 1930 kN | — | 570 rpm | 42.7 kg42700 g |
| SKF22240 CC/C3W33Spherical roller bearing with relubrication features |
| 1526 kN | 1930 kN | 1600 rpm | 2200 rpm | 42.6 kg42600 g |
| SKF22240 CCK/C3W33Spherical roller bearing with tapered bore and relubrication features |
| 1526 kN | 1930 kN | 1600 rpm | 2200 rpm | 41.7 kg41700 g |
| SKF22240 CCK/C4W33Spherical roller bearing with tapered bore and relubrication features |
| 1526 kN | 1930 kN | 1600 rpm | 2200 rpm | 41.7 kg41700 g |
| SKF22240 CCK/W33Spherical roller bearing with tapered bore and relubrication features |
| 1526 kN | 1930 kN | 1600 rpm | 2200 rpm | 41.7 kg41700 g |
| SKF22240 CCN1/C3W33Spherical roller bearing with locating slots and relubrication features |
| 1526 kN | 1930 kN | 1600 rpm | 2200 rpm | 41.7 kg41700 g |
| SKF22240 CC/W33Spherical roller bearing with relubrication features |
| 1526 kN | 1930 kN | 1600 rpm | 2200 rpm | 42.6 kg42600 g |
| FAG22240-BE-XLSpherical Roller Bearing |
| 1520 kN | 1990 kN | 1510 rpm | 2330 rpm | 42.65 kg42650 g |
| FAG22240-BE-XL-C3Spherical Roller Bearing |
| 1520 kN | 1990 kN | 1510 rpm | 2330 rpm | 42.65 kg42650 g |
| FAG22240-BE-XL-KSpherical Roller Bearing |
| 1520 kN | 1990 kN | 1510 rpm | 2330 rpm | 41.72 kg41720 g |
| FAG22240-BE-XL-K-C3Spherical Roller Bearing |
| 1520 kN | 1990 kN | 1510 rpm | 2330 rpm | 41.72 kg41720 g |
| FAG22240-BE-XL-K-C4Spherical Roller Bearing |
| 1520 kN | 1990 kN | 1510 rpm | 2330 rpm | 41.72 kg41720 g |
| TIMKEN22240EJW33Spherical roller bearing |
| 1580 kN | 2010 kN | — | — | 41.64 kg41640 g |
| TIMKEN22240EJW33C3Spherical roller bearing |
| 1580 kN | 2010 kN | — | — | 41.64 kg41640 g |
| TIMKEN22240EMBW33Spherical roller bearing |
| 1580 kN | 2010 kN | — | — | 43.63 kg43630 g |
| TIMKEN22240EMBW33C2Spherical roller bearing |
| 1580 kN | 2010 kN | — | — | 43.63 kg43630 g |
| TIMKEN22240EMBW33C3Spherical roller bearing |
| 1580 kN | 2010 kN | — | — | 43.63 kg43630 g |
| TIMKEN22240EMBW33C4Spherical roller bearing |
| 1580 kN | 2010 kN | — | — | 43.63 kg43630 g |
| TIMKEN22240EMBW507C08Spherical roller bearing |
| 1580 kN | 2010 kN | — | — | 43.63 kg43630 g |
| TIMKEN22240EMBW507C08C3Spherical roller bearing |
| 1580 kN | 2010 kN | — | — | 43.63 kg43630 g |
| TIMKEN22240KEJW33Spherical roller bearing |
| 1580 kN | 2010 kN | — | — | 40.68 kg40680 g |
| TIMKEN22240KEJW33C3Spherical roller bearing |
| 1580 kN | 2010 kN | — | — | 40.68 kg40680 g |
| TIMKEN22240KEMBW33Spherical roller bearing |
| 1580 kN | 2010 kN | — | — | 42.62 kg42620 g |
| TIMKEN22240KEMBW33C3Spherical roller bearing |
| 1580 kN | 2010 kN | — | — | 42.62 kg42620 g |
| TIMKEN22240KEMBW33C4Spherical roller bearing |
| 1580 kN | 2010 kN | — | — | 42.62 kg42620 g |
| TIMKEN22240KEMBW507C08Spherical roller bearing |
| 1580 kN | 2010 kN | — | — | 42.62 kg42620 g |
| TIMKEN22240KEMBW507C08C3Spherical roller bearing |
| 1580 kN | 2010 kN | — | — | 42.62 kg42620 g |
| NSK22240CAME4Spherical roller bearing |
| 1620 kN | 2010 kN | — | — | 42.6 kg42600 g |
| NSK22240CAMKE4Spherical roller bearing |
| 1620 kN | 2010 kN | — | — | — |
| KOYO22240RHASpherical roller bearing |
| 1630 kN | 2030 kN | — | 940 rpmLimiting Speeds(Grease Lub.): 940 min-1Limiting Speeds(Oil Lub.): 1300 min-1 | 42 kg42000 g |
| KOYO22240RHAK+AH2240Spherical roller bearing |
| 1630 kN | 2030 kN | — | 940 rpmLimiting Speeds(Grease Lub.): 940 min-1Limiting Speeds(Oil Lub.): 1300 min-1 | 45.7 kg45700 g |
| KOYO22240RHAK+H3140Spherical roller bearing |
| 1630 kN | 2030 kN | — | 940 rpmLimiting Speeds(Grease Lub.): 940 min-1Limiting Speeds(Oil Lub.): 1300 min-1 | 53.3 kg53300 g |
| KOYO22240RRSpherical roller bearing |
| 1620 kN | 2050 kN | — | 930 rpmLimiting Speeds(Grease Lub.): 930 min-1Limiting Speeds(Oil Lub.): 1200 min-1 | 45 kg45000 g |
| KOYO22240RRK+AH2240Spherical roller bearing |
| 1620 kN | 2050 kN | — | 930 rpmLimiting Speeds(Grease Lub.): 930 min-1Limiting Speeds(Oil Lub.): 1200 min-1 | 48.7 kg48700 g |
| KOYO22240RRK+H3140Spherical roller bearing |
| 1620 kN | 2050 kN | — | 930 rpmLimiting Speeds(Grease Lub.): 930 min-1Limiting Speeds(Oil Lub.): 1200 min-1 | 56.3 kg56300 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 22240-2CS5K/VT143 | Seal on both sides | Normal | CN | Sheet metal | Not recorded | Grease |
| SKF 22240-2CS5/VT143 | Seal on both sides | Normal | CN | Sheet metal | Not recorded | Grease |
| SKF 22240 CC/C3W33 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 22240 CCK/C3W33 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 22240 CCK/C4W33 | Without | Not recorded | C4 | Sheet metal | Not recorded | None |
| SKF 22240 CCK/W33 | Without | Normal | CN | Sheet metal | Not recorded | None |
| SKF 22240 CCN1/C3W33 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 22240 CC/W33 | Without | Normal | CN | Sheet metal | Not recorded | None |
| FAG 22240-BE-XL | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 22240-BE-XL-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 22240-BE-XL-K | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 22240-BE-XL-K-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 22240-BE-XL-K-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | JPB — Sheet metal cage | Not recorded | Not recorded |
| TIMKEN 22240EJW33 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22240EJW33C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22240EMBW33 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22240EMBW33C2 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22240EMBW33C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22240EMBW33C4 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22240EMBW507C08 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22240EMBW507C08C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22240KEJW33 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22240KEJW33C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22240KEMBW33 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22240KEMBW33C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22240KEMBW33C4 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22240KEMBW507C08 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22240KEMBW507C08C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| NSK 22240CAME4 | Not recorded | Not recorded | CN | Machined brass | Not recorded | Not recorded |
| NSK 22240CAMKE4 | Not recorded | Not recorded | CN | Machined brass | Not recorded | Not recorded |
| KOYO 22240RHA | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 22240RHAK+AH2240 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 22240RHAK+H3140 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 22240RR | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 22240RRK+AH2240 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 22240RRK+H3140 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
SKF
22240-2CS5K/VT143
Spherical roller bearing with tapered bore, integral sealing and relubrication features
View full technical record →SKF22240-2CS5/VT143
Spherical roller bearing with integral sealing and relubrication features
View full technical record →FAG22240-BE-XL
Spherical Roller Bearing
View full technical record →FAG22240-BE-XL-C3
Spherical Roller Bearing
View full technical record →FAG22240-BE-XL-K
Spherical Roller Bearing
View full technical record →FAG22240-BE-XL-K-C3
Spherical Roller Bearing
View full technical record →FAG22240-BE-XL-K-C4
Spherical Roller Bearing
View full technical record →NSK22240CAME4
Spherical roller bearing
View full technical record →NSK22240CAMKE4
Spherical roller bearing
View full technical record →SKF22240 CC/C3W33
Spherical roller bearing with relubrication features
View full technical record →SKF22240 CCK/C3W33
Spherical roller bearing with tapered bore and relubrication features
View full technical record →SKF22240 CCK/C4W33
Spherical roller bearing with tapered bore and relubrication features
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.