Find · understand · compare
22238 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 22238. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
22238 dimensions and recorded technical data
Use the named dimensions for each complete record below. A generic d×D×B answer is not asserted where the base record is missing, dimension symbols are unverified, or the product uses a different geometry such as a housing or thrust assembly. Suffix records are not substituted for a missing base specification.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 44 recorded variants are listed. A dash means the value is missing, not zero.
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF22238-2CS5K/VT143Spherical roller bearing with tapered bore, integral sealing and relubrication features |
| 1345 kN | 1700 kN | — | 600 rpm | 34.4 kg34400 g |
| SKF22238-2CS5/VT143Spherical roller bearing with integral sealing and relubrication features |
| 1345 kN | 1700 kN | — | 600 rpm | 34.4 kg34400 g |
| SKF22238 CC/C3W33Spherical roller bearing with relubrication features |
| 1342 kN | 1700 kN | 1700 rpm | 2400 rpm | 35.3 kg35300 g |
| SKF22238 CCK/C02W33Spherical roller bearing with tapered bore and relubrication features |
| 1342 kN | 1700 kN | 1700 rpm | 2400 rpm | 34.8 kg34800 g |
| SKF22238 CCK/C3W33Spherical roller bearing with tapered bore and relubrication features |
| 1342 kN | 1700 kN | 1700 rpm | 2400 rpm | 34.5 kg34500 g |
| SKF22238 CCK/C403W33Spherical roller bearing with tapered bore and relubrication features |
| 1342 kN | 1700 kN | 1700 rpm | 2400 rpm | 34.7 kg34700 g |
| SKF22238 CCK/C4W33Spherical roller bearing with tapered bore and relubrication features |
| 1342 kN | 1700 kN | 1700 rpm | 2400 rpm | 34.5 kg34500 g |
| SKF22238 CCK/HA3C4W33Spherical roller bearing with tapered bore and relubrication features |
| 1342 kN | 1700 kN | 1700 rpm | 2400 rpm | 34.5 kg34500 g |
| SKF22238 CCK/W33Spherical roller bearing with tapered bore and relubrication features |
| 1342 kN | 1700 kN | 1700 rpm | 2400 rpm | 34.5 kg34500 g |
| SKF22238 CC/W33Spherical roller bearing with relubrication features |
| 1342 kN | 1700 kN | 1700 rpm | 2400 rpm | 35.3 kg35300 g |
| FAG22238-BE-XLSpherical Roller Bearing |
| 1360 kN | 1760 kN | 1620 rpm | 2480 rpm | 35.4 kg35400 g |
| FAG22238-BE-XL-C3Spherical Roller Bearing |
| 1360 kN | 1760 kN | 1620 rpm | 2480 rpm | 35.4 kg35400 g |
| FAG22238-BE-XL-C4Spherical Roller Bearing |
| 1360 kN | 1760 kN | 1620 rpm | 2480 rpm | 35.4 kg35400 g |
| FAG22238-BE-XL-KSpherical Roller Bearing |
| 1360 kN | 1760 kN | 1620 rpm | 2480 rpm | 34.65 kg34650 g |
| FAG22238-BE-XL-K-C2Spherical Roller Bearing |
| 1360 kN | 1760 kN | 1620 rpm | 2480 rpm | 34.65 kg34650 g |
| FAG22238-BE-XL-K-C3Spherical Roller Bearing |
| 1360 kN | 1760 kN | 1620 rpm | 2480 rpm | 34.65 kg34650 g |
| FAG22238-BE-XL-K-C4Spherical Roller Bearing |
| 1360 kN | 1760 kN | 1620 rpm | 2480 rpm | 34.65 kg34650 g |
| TIMKEN22238EJW33Spherical roller bearing |
| 1550 kN | 1960 kN | — | — | 35.06 kg35060 g |
| TIMKEN22238EJW33C2Spherical roller bearing |
| 1550 kN | 1960 kN | — | — | 35.06 kg35060 g |
| TIMKEN22238EJW33C3Spherical roller bearing |
| 1550 kN | 1960 kN | — | — | 35.06 kg35060 g |
| TIMKEN22238EJW33C4Spherical roller bearing |
| 1550 kN | 1960 kN | — | — | 35.06 kg35060 g |
| TIMKEN22238EMBC3Spherical roller bearing |
| 1550 kN | 1960 kN | — | — | 36.19 kg36190 g |
| TIMKEN22238EMBW33Spherical roller bearing |
| 1550 kN | 1960 kN | — | — | 36.09 kg36090 g |
| TIMKEN22238EMBW33C2Spherical roller bearing |
| 1550 kN | 1960 kN | — | — | 36.09 kg36090 g |
| TIMKEN22238EMBW33C3Spherical roller bearing |
| 1550 kN | 1960 kN | — | — | 36.09 kg36090 g |
| TIMKEN22238EMBW33C4Spherical roller bearing |
| 1550 kN | 1960 kN | — | — | 36.09 kg36090 g |
| TIMKEN22238KEJW33Spherical roller bearing |
| 1550 kN | 1960 kN | — | — | 34.21 kg34210 g |
| TIMKEN22238KEJW33C2Spherical roller bearing |
| 1550 kN | 1960 kN | — | — | 34.21 kg34210 g |
| TIMKEN22238KEJW33C3Spherical roller bearing |
| 1550 kN | 1960 kN | — | — | 34.21 kg34210 g |
| TIMKEN22238KEJW33C4Spherical roller bearing |
| 1550 kN | 1960 kN | — | — | 34.21 kg34210 g |
| TIMKEN22238KEJW33W40IC4Spherical roller bearing |
| 1550 kN | 1960 kN | — | — | 34.21 kg34210 g |
| TIMKEN22238KEMBW33Spherical roller bearing |
| 1550 kN | 1960 kN | — | — | 35.24 kg35240 g |
| TIMKEN22238KEMBW33C3Spherical roller bearing |
| 1550 kN | 1960 kN | — | — | 35.24 kg35240 g |
| TIMKEN22238KEMBW33C4Spherical roller bearing |
| 1550 kN | 1960 kN | — | — | 35.24 kg35240 g |
| TIMKEN22238KEMBW33W40IC4Spherical roller bearing |
| 1550 kN | 1960 kN | — | — | 35.11 kg35110 g |
| TIMKEN22238KEMBW33W800C4Spherical roller bearing |
| 1550 kN | 1960 kN | — | — | 35.14 kg35140 g |
| NSK22238CAME4Spherical roller bearing |
| 1420 kN | 1730 kN | — | — | 35.5 kg35500 g |
| NSK22238CAMKE4Spherical roller bearing |
| 1420 kN | 1730 kN | — | — | — |
| KOYO22238RSpherical roller bearing |
| 1390 kN | 1730 kN | — | 1000 rpmLimiting Speeds(Grease Lub.): 1000 min-1Limiting Speeds(Oil Lub.): 1300 min-1 | 37.4 kg37400 g |
| KOYO22238RHASpherical roller bearing |
| 1420 kN | 1770 kN | — | 1000 rpmLimiting Speeds(Grease Lub.): 1000 min-1Limiting Speeds(Oil Lub.): 1300 min-1 | 34.9 kg34900 g |
| KOYO22238RHAK+AH2238Spherical roller bearing |
| 1420 kN | 1770 kN | — | 1000 rpmLimiting Speeds(Grease Lub.): 1000 min-1Limiting Speeds(Oil Lub.): 1300 min-1 | 38.4 kg38400 g |
| KOYO22238RHAK+H3138Spherical roller bearing |
| 1420 kN | 1770 kN | — | 1000 rpmLimiting Speeds(Grease Lub.): 1000 min-1Limiting Speeds(Oil Lub.): 1300 min-1 | 45 kg45000 g |
| KOYO22238RK+AH2238Spherical roller bearing |
| 1390 kN | 1730 kN | — | 1000 rpmLimiting Speeds(Grease Lub.): 1000 min-1Limiting Speeds(Oil Lub.): 1300 min-1 | 40.9 kg40900 g |
| KOYO22238RK+H3138Spherical roller bearing |
| 1390 kN | 1730 kN | — | 1000 rpmLimiting Speeds(Grease Lub.): 1000 min-1Limiting Speeds(Oil Lub.): 1300 min-1 | 47.5 kg47500 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 22238-2CS5K/VT143 | Seal on both sides | Normal | CN | Sheet metal | Not recorded | Grease |
| SKF 22238-2CS5/VT143 | Seal on both sides | Normal | CN | Sheet metal | Not recorded | Grease |
| SKF 22238 CC/C3W33 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 22238 CCK/C02W33 | Without | Not recorded | CN | Sheet metal | Not recorded | None |
| SKF 22238 CCK/C3W33 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 22238 CCK/C403W33 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 22238 CCK/C4W33 | Without | Not recorded | C4 | Sheet metal | Not recorded | None |
| SKF 22238 CCK/HA3C4W33 | Without | Not recorded | C4 | Sheet metal | Not recorded | None |
| SKF 22238 CCK/W33 | Without | Normal | CN | Sheet metal | Not recorded | None |
| SKF 22238 CC/W33 | Without | Normal | CN | Sheet metal | Not recorded | None |
| FAG 22238-BE-XL | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 22238-BE-XL-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 22238-BE-XL-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 22238-BE-XL-K | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 22238-BE-XL-K-C2 | Not recorded | Not recorded | C2 (Group 2) — Internal clearance smaller than CN | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 22238-BE-XL-K-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | JPB — Sheet metal cage | Not recorded | Not recorded |
| FAG 22238-BE-XL-K-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | JPB — Sheet metal cage | Not recorded | Not recorded |
| TIMKEN 22238EJW33 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22238EJW33C2 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22238EJW33C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22238EJW33C4 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22238EMBC3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22238EMBW33 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22238EMBW33C2 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22238EMBW33C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22238EMBW33C4 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22238KEJW33 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22238KEJW33C2 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22238KEJW33C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22238KEJW33C4 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22238KEJW33W40IC4 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22238KEMBW33 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22238KEMBW33C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22238KEMBW33C4 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22238KEMBW33W40IC4 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22238KEMBW33W800C4 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| NSK 22238CAME4 | Not recorded | Not recorded | CN | Machined brass | Not recorded | Not recorded |
| NSK 22238CAMKE4 | Not recorded | Not recorded | CN | Machined brass | Not recorded | Not recorded |
| KOYO 22238R | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 22238RHA | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 22238RHAK+AH2238 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 22238RHAK+H3138 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 22238RK+AH2238 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 22238RK+H3138 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
SKF
22238-2CS5K/VT143
Spherical roller bearing with tapered bore, integral sealing and relubrication features
View full technical record →SKF22238-2CS5/VT143
Spherical roller bearing with integral sealing and relubrication features
View full technical record →FAG22238-BE-XL
Spherical Roller Bearing
View full technical record →FAG22238-BE-XL-C3
Spherical Roller Bearing
View full technical record →FAG22238-BE-XL-C4
Spherical Roller Bearing
View full technical record →FAG22238-BE-XL-K
Spherical Roller Bearing
View full technical record →FAG22238-BE-XL-K-C2
Spherical Roller Bearing
View full technical record →FAG22238-BE-XL-K-C3
Spherical Roller Bearing
View full technical record →FAG22238-BE-XL-K-C4
Spherical Roller Bearing
View full technical record →NSK22238CAME4
Spherical roller bearing
View full technical record →NSK22238CAMKE4
Spherical roller bearing
View full technical record →SKF22238 CC/C3W33
Spherical roller bearing with relubrication features
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.