99,016 bearing records · search, filter and compare

info@bearingscope.com
Find · understand · compare

22230 bearing dimensions & suffix variants

Look up recorded dimensions for designations beginning with 22230. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.

On this page5 sections

Find by measured dimensions

Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.

For tapered assemblies use total width T; for units or flanged bearings also check the mounting drawing.

Exact model evidence

22230 dimensions and recorded technical data

Use the named dimensions for each complete record below. A generic d×D×B answer is not asserted where the base record is missing, dimension symbols are unverified, or the product uses a different geometry such as a housing or thrust assembly. Suffix records are not substituted for a missing base specification.

The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 49 recorded variants are listed. A dash means the value is missing, not zero.

Brand / full designationNamed dimensions (mm / in)Dynamic C (kN)Static C0 (kN)Reference speed (rpm)Limiting speed (rpm)Mass (kg / g)
SKF22230-2CS5K/VT143Spherical roller bearing with tapered bore, integral sealing and relubrication features
Bore diameter (d)
150 mm
5.905512 in
Outside diameter (D)
270 mm
10.629921 in
Width (B)
73 mm
2.874016 in
899 kN1080 kN—750 rpm17.5 kg17500 g
SKF22230-2CS5/VT143Spherical roller bearing with integral sealing and relubrication features
Bore diameter (d)
150 mm
5.905512 in
Outside diameter (D)
270 mm
10.629921 in
Width (B)
73 mm
2.874016 in
899 kN1080 kN—750 rpm17.8 kg17800 g
SKF22230/C3W33VA9A1Spherical roller bearing for low-speed applications, with relubrication features
Recorded bore (d)
150 mm
5.905512 in
Recorded outside dimension (D)
270 mm
10.629921 in
Catalogue width (symbol unverified)
73 mm
2.874016 in
736 kN1100 kN—300 rpm17.8 kg17800 g
SKF22230 CC/C2W33Spherical roller bearing with relubrication features
Recorded bore (d)
150 mm
5.905512 in
Recorded outside dimension (D)
270 mm
10.629921 in
Catalogue width (symbol unverified)
73 mm
2.874016 in
898 kN1080 kN2200 rpm3000 rpm17.8 kg17800 g
SKF22230 CC/C3W33Spherical roller bearing with relubrication features
Recorded bore (d)
150 mm
5.905512 in
Recorded outside dimension (D)
270 mm
10.629921 in
Catalogue width (symbol unverified)
73 mm
2.874016 in
898 kN1080 kN2200 rpm3000 rpm17.8 kg17800 g
SKF22230 CC/C4W33Spherical roller bearing with relubrication features
Recorded bore (d)
150 mm
5.905512 in
Recorded outside dimension (D)
270 mm
10.629921 in
Catalogue width (symbol unverified)
73 mm
2.874016 in
898 kN1080 kN2200 rpm3000 rpm17.8 kg17800 g
SKF22230 CCK/C2W33Spherical roller bearing with tapered bore and relubrication features
Recorded bore (d)
150 mm
5.905512 in
Recorded outside dimension (D)
270 mm
10.629921 in
Catalogue width (symbol unverified)
73 mm
2.874016 in
898 kN1080 kN2200 rpm3000 rpm17.4 kg17400 g
SKF22230 CCK/C3W33Spherical roller bearing with tapered bore and relubrication features
Recorded bore (d)
150 mm
5.905512 in
Recorded outside dimension (D)
270 mm
10.629921 in
Catalogue width (symbol unverified)
73 mm
2.874016 in
898 kN1080 kN2200 rpm3000 rpm17.4 kg17400 g
SKF22230 CCK/C4W33Spherical roller bearing with tapered bore and relubrication features
Recorded bore (d)
150 mm
5.905512 in
Recorded outside dimension (D)
270 mm
10.629921 in
Catalogue width (symbol unverified)
73 mm
2.874016 in
898 kN1080 kN2200 rpm3000 rpm17.4 kg17400 g
SKF22230 CCK/W33Spherical roller bearing with tapered bore and relubrication features
Bore diameter (d)
150 mm
5.905512 in
Outside diameter (D)
270 mm
10.629921 in
Width (B)
73 mm
2.874016 in
898 kN1080 kN2200 rpm3000 rpm17.4 kg17400 g
SKF22230 CC/W33Spherical roller bearing with relubrication features
Bore diameter (d)
150 mm
5.905512 in
Outside diameter (D)
270 mm
10.629921 in
Width (B)
73 mm
2.874016 in
898 kN1080 kN2200 rpm3000 rpm17.8 kg17800 g
SKF22230 K/C3W33VA9A1Spherical roller bearing for low-speed applications, with tapered bore and relubrication features
Recorded bore (d)
150 mm
5.905512 in
Recorded outside dimension (D)
270 mm
10.629921 in
Catalogue width (symbol unverified)
73 mm
2.874016 in
736 kN1100 kN—300 rpm17.8 kg17800 g
SKF22230 K/W33VA9A1Spherical roller bearing for low-speed applications, with tapered bore and relubrication features
Recorded bore (d)
150 mm
5.905512 in
Recorded outside dimension (D)
270 mm
10.629921 in
Catalogue width (symbol unverified)
73 mm
2.874016 in
736 kN1100 kN—300 rpm17.8 kg17800 g
SKF22230/W33VA9A1Spherical roller bearing for low-speed applications, with relubrication features
Recorded bore (d)
150 mm
5.905512 in
Recorded outside dimension (D)
270 mm
10.629921 in
Catalogue width (symbol unverified)
73 mm
2.874016 in
736 kN1100 kN—300 rpm17.8 kg17800 g
FAG22230-E1A-XL-K-MSpherical Roller Bearing
Bore diameter (d)
150 mm
5.905512 in
Outside diameter (D)
270 mm
10.629921 in
Width (B)
73 mm
2.874016 in
1010 kN1210 kN2050 rpm2900 rpm17.283 kg17283 g
FAG22230-E1A-XL-K-M-C3Spherical Roller Bearing
Bore diameter (d)
150 mm
5.905512 in
Outside diameter (D)
270 mm
10.629921 in
Width (B)
73 mm
2.874016 in
1010 kN1210 kN2050 rpm2900 rpm17.283 kg17283 g
FAG22230-E1A-XL-K-M-C4Spherical Roller Bearing
Bore diameter (d)
150 mm
5.905512 in
Outside diameter (D)
270 mm
10.629921 in
Width (B)
73 mm
2.874016 in
1010 kN1210 kN2050 rpm2900 rpm17.283 kg17283 g
FAG22230-E1A-XL-MSpherical Roller Bearing
Bore diameter (d)
150 mm
5.905512 in
Outside diameter (D)
270 mm
10.629921 in
Width (B)
73 mm
2.874016 in
1010 kN1210 kN2050 rpm2900 rpm17.676 kg17676 g
FAG22230-E1A-XL-M-C3Spherical Roller Bearing
Bore diameter (d)
150 mm
5.905512 in
Outside diameter (D)
270 mm
10.629921 in
Width (B)
73 mm
2.874016 in
1010 kN1210 kN2050 rpm2900 rpm17.661 kg17661 g
FAG22230-E1A-XL-M-C4Spherical Roller Bearing
Bore diameter (d)
150 mm
5.905512 in
Outside diameter (D)
270 mm
10.629921 in
Width (B)
73 mm
2.874016 in
1010 kN1210 kN2050 rpm2900 rpm17.661 kg17661 g
FAG22230-E1-XLSpherical Roller Bearing
Bore diameter (d)
150 mm
5.905512 in
Outside diameter (D)
270 mm
10.629921 in
Width (B)
73 mm
2.874016 in
1010 kN1210 kN2050 rpm2900 rpm17.639 kg17639 g
FAG22230-E1-XL-C3Spherical Roller Bearing
Bore diameter (d)
150 mm
5.905512 in
Outside diameter (D)
270 mm
10.629921 in
Width (B)
73 mm
2.874016 in
1010 kN1210 kN2050 rpm2900 rpm17.738 kg17738 g
FAG22230-E1-XL-C4Spherical Roller Bearing
Bore diameter (d)
150 mm
5.905512 in
Outside diameter (D)
270 mm
10.629921 in
Width (B)
73 mm
2.874016 in
1010 kN1210 kN2050 rpm2900 rpm17.61 kg17610 g
FAG22230-E1-XL-H151Spherical Roller Bearing
Bore diameter (d)
150 mm
5.905512 in
Outside diameter (D)
270 mm
10.629921 in
Width (B)
73 mm
2.874016 in
1010 kN1210 kN2050 rpm2900 rpm17.633 kg17633 g
FAG22230-E1-XL-H151-C3Spherical Roller Bearing
Bore diameter (d)
150 mm
5.905512 in
Outside diameter (D)
270 mm
10.629921 in
Width (B)
73 mm
2.874016 in
1010 kN1210 kN2050 rpm2900 rpm18 kg18000 g
FAG22230-E1-XL-KSpherical Roller Bearing
Bore diameter (d)
150 mm
5.905512 in
Outside diameter (D)
270 mm
10.629921 in
Width (B)
73 mm
2.874016 in
1010 kN1210 kN2050 rpm2900 rpm17.251 kg17251 g
FAG22230-E1-XL-K-C3Spherical Roller Bearing
Bore diameter (d)
150 mm
5.905512 in
Outside diameter (D)
270 mm
10.629921 in
Width (B)
73 mm
2.874016 in
1010 kN1210 kN2050 rpm2900 rpm17.37 kg17370 g
FAG22230-E1-XL-K-C4Spherical Roller Bearing
Bore diameter (d)
150 mm
5.905512 in
Outside diameter (D)
270 mm
10.629921 in
Width (B)
73 mm
2.874016 in
1010 kN1210 kN2050 rpm2900 rpm17.225 kg17225 g
TIMKEN22230EJW33Spherical roller bearing
Recorded bore (d)
150 mm
5.905512 in
Recorded outside dimension (D)
270 mm
10.629921 in
Catalogue width (symbol unverified)
73 mm
2.874016 in
1000 kN1230 kN——17.64 kg17640 g
TIMKEN22230EJW33C2Spherical roller bearing
Recorded bore (d)
150 mm
5.905512 in
Recorded outside dimension (D)
270 mm
10.629921 in
Catalogue width (symbol unverified)
73 mm
2.874016 in
1000 kN1230 kN——17.64 kg17640 g
TIMKEN22230EJW33C3Spherical roller bearing
Recorded bore (d)
150 mm
5.905512 in
Recorded outside dimension (D)
270 mm
10.629921 in
Catalogue width (symbol unverified)
73 mm
2.874016 in
1000 kN1230 kN——17.64 kg17640 g
TIMKEN22230EJW33C3SLASpherical roller bearing
Recorded bore (d)
150 mm
5.905512 in
Recorded outside dimension (D)
270 mm
10.629921 in
Catalogue width (symbol unverified)
73 mm
2.874016 in
1000 kN1230 kN——17.97 kg17970 g
TIMKEN22230EJW33C4Spherical roller bearing
Recorded bore (d)
150 mm
5.905512 in
Recorded outside dimension (D)
270 mm
10.629921 in
Catalogue width (symbol unverified)
73 mm
2.874016 in
1000 kN1230 kN——17.64 kg17640 g
TIMKEN22230EMW33Spherical roller bearing
Recorded bore (d)
150 mm
5.905512 in
Recorded outside dimension (D)
270 mm
10.629921 in
Catalogue width (symbol unverified)
73 mm
2.874016 in
1000 kN1230 kN——17.96 kg17960 g
TIMKEN22230EMW33C3Spherical roller bearing
Recorded bore (d)
150 mm
5.905512 in
Recorded outside dimension (D)
270 mm
10.629921 in
Catalogue width (symbol unverified)
73 mm
2.874016 in
1000 kN1230 kN——17.96 kg17960 g
TIMKEN22230EMW33C4Spherical roller bearing
Recorded bore (d)
150 mm
5.905512 in
Recorded outside dimension (D)
270 mm
10.629921 in
Catalogue width (symbol unverified)
73 mm
2.874016 in
1000 kN1230 kN——17.96 kg17960 g
TIMKEN22230KEJW33Spherical roller bearing
Recorded bore (d)
150 mm
5.905512 in
Recorded outside dimension (D)
270 mm
10.629921 in
Catalogue width (symbol unverified)
73 mm
2.874016 in
1000 kN1230 kN——17.06 kg17060 g
TIMKEN22230KEJW33C3Spherical roller bearing
Recorded bore (d)
150 mm
5.905512 in
Recorded outside dimension (D)
270 mm
10.629921 in
Catalogue width (symbol unverified)
73 mm
2.874016 in
1000 kN1230 kN——17.06 kg17060 g
TIMKEN22230KEMW33Spherical roller bearing
Recorded bore (d)
150 mm
5.905512 in
Recorded outside dimension (D)
270 mm
10.629921 in
Catalogue width (symbol unverified)
73 mm
2.874016 in
1000 kN1230 kN——17.54 kg17540 g
TIMKEN22230KEMW33C2Spherical roller bearing
Recorded bore (d)
150 mm
5.905512 in
Recorded outside dimension (D)
270 mm
10.629921 in
Catalogue width (symbol unverified)
73 mm
2.874016 in
1000 kN1230 kN——17.54 kg17540 g
TIMKEN22230KEMW33C3Spherical roller bearing
Recorded bore (d)
150 mm
5.905512 in
Recorded outside dimension (D)
270 mm
10.629921 in
Catalogue width (symbol unverified)
73 mm
2.874016 in
1000 kN1230 kN——17.54 kg17540 g
TIMKEN22230KEMW33C4Spherical roller bearing
Recorded bore (d)
150 mm
5.905512 in
Recorded outside dimension (D)
270 mm
10.629921 in
Catalogue width (symbol unverified)
73 mm
2.874016 in
1000 kN1230 kN——17.54 kg17540 g
NSK22230CAME4Spherical roller bearing
Bore diameter (d)
150 mm
5.905512 in
Outside diameter (D)
270 mm
10.629921 in
Bearing width (B)
73 mm
2.874016 in
955 kN1120 kN——18.4 kg18400 g
NSK22230CAMKE4Spherical roller bearing
Nominal bore diameter (1:12 taper) (d)
150 mm
5.905512 in
Outside diameter (D)
270 mm
10.629921 in
Bearing width (B)
73 mm
2.874016 in
955 kN1120 kN———
NSK22230CDE4Spherical roller bearing
Bore diameter (d)
150 mm
5.905512 in
Outside diameter (D)
270 mm
10.629921 in
Bearing width (B)
73 mm
2.874016 in
955 kN1120 kN——18.4 kg18400 g
NSK22230CDKE4Spherical roller bearing
Nominal bore diameter (1:12 taper) (d)
150 mm
5.905512 in
Outside diameter (D)
270 mm
10.629921 in
Bearing width (B)
73 mm
2.874016 in
955 kN1120 kN———
KOYO22230RHRSpherical roller bearing
Bore diameter (d)
150 mm
5.905512 in
Outside diameter (D)
270 mm
10.629921 in
Width (B)
73 mm
2.874016 in
1080 kN1200 kN—1700 rpmLimiting Speeds(Grease Lub.): 1700 min-1Limiting Speeds(Oil Lub.): 2200 min-118.9 kg18900 g
KOYO22230RZK+AHX3130Spherical roller bearing
Bore diameter (d)
150 mm
5.905512 in
Outside diameter (D)
270 mm
10.629921 in
Width (B)
73 mm
2.874016 in
1080 kN1200 kN—1700 rpmLimiting Speeds(Grease Lub.): 1700 min-1Limiting Speeds(Oil Lub.): 2200 min-120.3 kg20300 g
KOYO22230RZK+H3130Spherical roller bearing
Bore diameter (d)
150 mm
5.905512 in
Outside diameter (D)
270 mm
10.629921 in
Width (B)
73 mm
2.874016 in
1080 kN1200 kN—1700 rpmLimiting Speeds(Grease Lub.): 1700 min-1Limiting Speeds(Oil Lub.): 2200 min-124.3 kg24300 g
Compare recorded seals, clearance, precision and materials

Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.

Brand / designationClosureOriginal precisionClearanceCageMaterialLubricant
SKF 22230-2CS5K/VT143Seal on both sidesNormalCNSheet metalNot recordedGrease
SKF 22230-2CS5/VT143Seal on both sidesNormalCNSheet metalNot recordedGrease
SKF 22230/C3W33VA9A1WithoutNot recordedC3Sheet metalNot recordedNone
SKF 22230 CC/C2W33WithoutNot recordedC2Sheet metalNot recordedNone
SKF 22230 CC/C3W33WithoutNot recordedC3Sheet metalNot recordedNone
SKF 22230 CC/C4W33WithoutNot recordedC4Sheet metalNot recordedNone
SKF 22230 CCK/C2W33WithoutNot recordedC2Sheet metalNot recordedNone
SKF 22230 CCK/C3W33WithoutNot recordedC3Sheet metalNot recordedNone
SKF 22230 CCK/C4W33WithoutNot recordedC4Sheet metalNot recordedNone
SKF 22230 CCK/W33WithoutNormalCNSheet metalNot recordedNone
SKF 22230 CC/W33WithoutNormalCNSheet metalNot recordedNone
SKF 22230 K/C3W33VA9A1WithoutNot recordedC3Sheet metalNot recordedNone
SKF 22230 K/W33VA9A1WithoutNot recordedCNSheet metalNot recordedNone
SKF 22230/W33VA9A1WithoutNot recordedCNSheet metalNot recordedNone
FAG 22230-E1A-XL-K-MNot recordedNot recordedCN (Group N) — Normal internal clearanceM — Brass CageNot recordedNot recorded
FAG 22230-E1A-XL-K-M-C3Not recordedNot recordedC3 (Group 3) — Internal clearance larger than CNM — Brass CageNot recordedNot recorded
FAG 22230-E1A-XL-K-M-C4Not recordedNot recordedC4 (Group 4) — Internal clearance larger than C3M — Brass CageNot recordedNot recorded
FAG 22230-E1A-XL-MNot recordedNot recordedCN (Group N) — Normal internal clearanceM — Brass CageNot recordedNot recorded
FAG 22230-E1A-XL-M-C3Not recordedNot recordedC3 (Group 3) — Internal clearance larger than CNM — Brass CageNot recordedNot recorded
FAG 22230-E1A-XL-M-C4Not recordedNot recordedC4 (Group 4) — Internal clearance larger than C3M — Brass CageNot recordedNot recorded
FAG 22230-E1-XLNot recordedNot recordedCN (Group N) — Normal internal clearanceJPA — Sheet metal cageNot recordedNot recorded
FAG 22230-E1-XL-C3Not recordedNot recordedC3 (Group 3) — Internal clearance larger than CNJPA — Sheet metal cageNot recordedNot recorded
FAG 22230-E1-XL-C4Not recordedNot recordedC4 (Group 4) — Internal clearance larger than C3JPA — Sheet metal cageNot recordedNot recorded
FAG 22230-E1-XL-H151Not recordedNot recordedCN (Group N) — Normal internal clearanceJPA — Sheet metal cageNot recordedNot recorded
FAG 22230-E1-XL-H151-C3Not recordedNot recordedC3 (Group 3) — Internal clearance larger than CNJPA — Sheet metal cageNot recordedNot recorded
FAG 22230-E1-XL-KNot recordedNot recordedCN (Group N) — Normal internal clearanceJPA — Sheet metal cageNot recordedNot recorded
FAG 22230-E1-XL-K-C3Not recordedNot recordedC3 (Group 3) — Internal clearance larger than CNJPA — Sheet metal cageNot recordedNot recorded
FAG 22230-E1-XL-K-C4Not recordedNot recordedC4 (Group 4) — Internal clearance larger than C3JPA — Sheet metal cageNot recordedNot recorded
TIMKEN 22230EJW33OpenNot recordedNot recordedSteel cageNot recordedNot recorded
TIMKEN 22230EJW33C2OpenNot recordedNot recordedSteel cageNot recordedNot recorded
TIMKEN 22230EJW33C3OpenNot recordedNot recordedSteel cageNot recordedNot recorded
TIMKEN 22230EJW33C3SLAOpenNot recordedNot recordedSteel cageNot recordedNot recorded
TIMKEN 22230EJW33C4OpenNot recordedNot recordedSteel cageNot recordedNot recorded
TIMKEN 22230EMW33OpenNot recordedNot recordedBrass cageNot recordedNot recorded
TIMKEN 22230EMW33C3OpenNot recordedNot recordedBrass cageNot recordedNot recorded
TIMKEN 22230EMW33C4OpenNot recordedNot recordedBrass cageNot recordedNot recorded
TIMKEN 22230KEJW33OpenNot recordedNot recordedSteel cageNot recordedNot recorded
TIMKEN 22230KEJW33C3OpenNot recordedNot recordedSteel cageNot recordedNot recorded
TIMKEN 22230KEMW33OpenNot recordedNot recordedBrass cageNot recordedNot recorded
TIMKEN 22230KEMW33C2OpenNot recordedNot recordedBrass cageNot recordedNot recorded
TIMKEN 22230KEMW33C3OpenNot recordedNot recordedBrass cageNot recordedNot recorded
TIMKEN 22230KEMW33C4OpenNot recordedNot recordedBrass cageNot recordedNot recorded
NSK 22230CAME4Not recordedNot recordedCNMachined brassNot recordedNot recorded
NSK 22230CAMKE4Not recordedNot recordedCNMachined brassNot recordedNot recorded
NSK 22230CDE4Not recordedNot recordedCNPressed steelNot recordedNot recorded
NSK 22230CDKE4Not recordedNot recordedCNPressed steelNot recordedNot recorded
KOYO 22230RHRNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 22230RZK+AHX3130Not recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 22230RZK+H3130Not recordedNot recordedNot recordedNot recordedNot recordedNot recorded

How to compare these values

  • Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
  • Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
  • C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
  • Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
  • A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Check load calculations →Estimate rating life →Decode the complete marking →Check replacement evidence →

Related prefix matches — other model numbers may appear

These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.

SKF

22230-2CS5K/VT143

Spherical roller bearing with tapered bore, integral sealing and relubrication features

View full technical record →SKF

22230-2CS5/VT143

Spherical roller bearing with integral sealing and relubrication features

View full technical record →SKF

22230/C3W33VA9A1

Spherical roller bearing for low-speed applications, with relubrication features

View full technical record →NSK

22230CAME4

Spherical roller bearing

View full technical record →NSK

22230CAMKE4

Spherical roller bearing

View full technical record →SKF

22230 CC/C2W33

Spherical roller bearing with relubrication features

View full technical record →SKF

22230 CC/C3W33

Spherical roller bearing with relubrication features

View full technical record →SKF

22230 CC/C4W33

Spherical roller bearing with relubrication features

View full technical record →SKF

22230 CCK/C2W33

Spherical roller bearing with tapered bore and relubrication features

View full technical record →SKF

22230 CCK/C3W33

Spherical roller bearing with tapered bore and relubrication features

View full technical record →SKF

22230 CCK/C4W33

Spherical roller bearing with tapered bore and relubrication features

View full technical record →SKF

22230 CCK/W33

Spherical roller bearing with tapered bore and relubrication features

View full technical record →
Filter all 49 prefix results →

Check the drawing before substituting

Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.

Measurement guide →Cross-reference checks →

Reference basis & data limits

Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.

Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.

Search the consolidated catalogue

Find, filter and compare bearing model data in one place.

Open model search