Find · understand · compare
22228 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 22228. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
22228 dimensions and recorded technical data
Use the named dimensions for each complete record below. A generic d×D×B answer is not asserted where the base record is missing, dimension symbols are unverified, or the product uses a different geometry such as a housing or thrust assembly. Suffix records are not substituted for a missing base specification.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 54 recorded variants are listed. A dash means the value is missing, not zero.
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF22228-2CS5/C3VT143Spherical roller bearing with integral sealing and relubrication features |
| 744 kN | 900 kN | — | 800 rpm | 14.1 kg14100 g |
| SKF22228-2CS5K/C3VT143Spherical roller bearing with tapered bore, integral sealing and relubrication features |
| 744 kN | 900 kN | — | 800 rpm | 13.8 kg13800 g |
| SKF22228-2CS5K/VT143Spherical roller bearing with tapered bore, integral sealing and relubrication features |
| 744 kN | 900 kN | — | 800 rpm | 14.1 kg14100 g |
| SKF22228-2CS5/VT143Spherical roller bearing with integral sealing and relubrication features |
| 744 kN | 900 kN | — | 800 rpm | 14.1 kg14100 g |
| SKF22228/C3W33VA9A1Spherical roller bearing for low-speed applications, with relubrication features |
| 610 kN | 915 kN | — | 320 rpm | 14 kg14000 g |
| SKF22228 CC/C2W33Spherical roller bearing with relubrication features |
| 743 kN | 900 kN | 2400 rpm | 3200 rpm | 14 kg14000 g |
| SKF22228 CC/C3W33Spherical roller bearing with relubrication features |
| 743 kN | 900 kN | 2400 rpm | 3200 rpm | 14 kg14000 g |
| SKF22228 CC/C3W33VE194Spherical roller bearing with locating slots and relubrication features |
| 743 kN | 900 kN | 2400 rpm | 3200 rpm | 14 kg14000 g |
| SKF22228 CC/C403W33Spherical roller bearing with relubrication features |
| 743 kN | 900 kN | 2400 rpm | 3200 rpm | 13.9 kg13900 g |
| SKF22228 CC/C4W33Spherical roller bearing with relubrication features |
| 743 kN | 900 kN | 2400 rpm | 3200 rpm | 13.9 kg13900 g |
| SKF22228 CC/C5W33Spherical roller bearing with relubrication features |
| 743 kN | 900 kN | 2400 rpm | 3200 rpm | 13.9 kg13900 g |
| SKF22228 CCK/C3W33Spherical roller bearing with tapered bore and relubrication features |
| 743 kN | 900 kN | 2400 rpm | 3200 rpm | 13.7 kg13700 g |
| SKF22228 CCK/C4W33Spherical roller bearing with tapered bore and relubrication features |
| 743 kN | 900 kN | 2400 rpm | 3200 rpm | 13.6 kg13600 g |
| SKF22228 CCK/C5W33Spherical roller bearing with tapered bore and relubrication features |
| 743 kN | 900 kN | 2400 rpm | 3200 rpm | 13.6 kg13600 g |
| SKF22228 CCK/W33Spherical roller bearing with tapered bore and relubrication features |
| 743 kN | 900 kN | 2400 rpm | 3200 rpm | 13.7 kg13700 g |
| SKF22228 CC/W33Spherical roller bearing with relubrication features |
| 743 kN | 900 kN | 2400 rpm | 3200 rpm | 14 kg14000 g |
| SKF22228 CC/W513Spherical roller bearing with relubrication features |
| 743 kN | 900 kN | 2400 rpm | 3200 rpm | 13.9 kg13900 g |
| SKF22228 K/C3W33VA9A1Spherical roller bearing for low-speed applications, with tapered bore and relubrication features |
| 610 kN | 915 kN | — | 320 rpm | 13.5 kg13500 g |
| SKF22228 K/W33VA9A1Spherical roller bearing for low-speed applications, with tapered bore and relubrication features |
| 610 kN | 915 kN | — | 320 rpm | 13.5 kg13500 g |
| SKF22228/W33VA9A1Spherical roller bearing for low-speed applications, with relubrication features |
| 610 kN | 915 kN | — | 320 rpm | 14 kg14000 g |
| FAG22228-E1A-XL-2RSR-MSpherical Roller Bearing |
| 830 kN | 970 kN | — | 820 rpm | 14.1 kg14100 g |
| FAG22228-E1A-XL-K-2RSR-MSpherical Roller Bearing |
| 830 kN | 970 kN | — | 820 rpm | 13.6 kg13600 g |
| FAG22228-E1A-XL-K-2RSR-M-C3Spherical Roller Bearing |
| 830 kN | 970 kN | — | 820 rpm | 13.6 kg13600 g |
| FAG22228-E1A-XL-K-MSpherical Roller Bearing |
| 870 kN | 1040 kN | 2250 rpm | 3150 rpm | 13.799 kg13799 g |
| FAG22228-E1A-XL-K-M-C3Spherical Roller Bearing |
| 870 kN | 1040 kN | 2250 rpm | 3150 rpm | 13.797 kg13797 g |
| FAG22228-E1A-XL-K-M-C4Spherical Roller Bearing |
| 870 kN | 1040 kN | 2250 rpm | 3150 rpm | 13.802 kg13802 g |
| FAG22228-E1A-XL-MSpherical Roller Bearing |
| 870 kN | 1040 kN | 2250 rpm | 3150 rpm | 14.111 kg14111 g |
| FAG22228-E1A-XL-M-C3Spherical Roller Bearing |
| 870 kN | 1040 kN | 2250 rpm | 3150 rpm | 14.099 kg14099 g |
| FAG22228-E1-XLSpherical Roller Bearing |
| 870 kN | 1040 kN | 2250 rpm | 3150 rpm | 14.004 kg14004 g |
| FAG22228-E1-XL-C3Spherical Roller Bearing |
| 870 kN | 1040 kN | 2250 rpm | 3150 rpm | 14.09 kg14090 g |
| FAG22228-E1-XL-C4Spherical Roller Bearing |
| 870 kN | 1040 kN | 2250 rpm | 3150 rpm | 13.4 kg13400 g |
| FAG22228-E1-XL-C5Spherical Roller Bearing |
| 870 kN | 1040 kN | 2250 rpm | 3150 rpm | 14.3 kg14300 g |
| FAG22228-E1-XL-KSpherical Roller Bearing |
| 870 kN | 1040 kN | 2250 rpm | 3150 rpm | 13.688 kg13688 g |
| FAG22228-E1-XL-K-C2Spherical Roller Bearing |
| 870 kN | 1040 kN | 2250 rpm | 3150 rpm | 14 kg14000 g |
| FAG22228-E1-XL-K-C3Spherical Roller Bearing |
| 870 kN | 1040 kN | 2250 rpm | 3150 rpm | 13.765 kg13765 g |
| FAG22228-E1-XL-K-C4Spherical Roller Bearing |
| 870 kN | 1040 kN | 2250 rpm | 3150 rpm | 13.694 kg13694 g |
| TIMKEN22228EJW33Spherical roller bearing |
| 863 kN | 1060 kN | — | — | 13.87 kg13870 g |
| TIMKEN22228EJW33C3Spherical roller bearing |
| 863 kN | 1060 kN | — | — | 13.87 kg13870 g |
| TIMKEN22228EMW33Spherical roller bearing |
| 863 kN | 1060 kN | — | — | 14.2 kg14200 g |
| TIMKEN22228EMW33C3Spherical roller bearing |
| 863 kN | 1060 kN | — | — | 14.2 kg14200 g |
| TIMKEN22228KEJW33Spherical roller bearing |
| 863 kN | 1060 kN | — | — | 13.53 kg13530 g |
| TIMKEN22228KEJW33C3Spherical roller bearing |
| 863 kN | 1060 kN | — | — | 13.53 kg13530 g |
| TIMKEN22228KEJW33C4Spherical roller bearing |
| 863 kN | 1060 kN | — | — | 13.53 kg13530 g |
| TIMKEN22228KEMAW33C3Spherical roller bearing |
| 831 kN | 1000 kN | — | — | 13.86 kg13860 g |
| TIMKEN22228KEMW33Spherical roller bearing |
| 863 kN | 1060 kN | — | — | 13.86 kg13860 g |
| TIMKEN22228KEMW33C3Spherical roller bearing |
| 863 kN | 1060 kN | — | — | 13.86 kg13860 g |
| TIMKEN22228KEMW33C4Spherical roller bearing |
| 863 kN | 1060 kN | — | — | 13.86 kg13860 g |
| NSK22228CAME4Spherical roller bearing |
| 835 kN | 945 kN | — | — | 14.5 kg14500 g |
| NSK22228CAMKE4Spherical roller bearing |
| 835 kN | 945 kN | — | — | — |
| NSK22228CDE4Spherical roller bearing |
| 645 kN | 930 kN | — | — | 14.5 kg14500 g |
| NSK22228CDKE4Spherical roller bearing |
| 645 kN | 930 kN | — | — | — |
| KOYO22228RHRSpherical roller bearing |
| 947 kN | 1030 kN | — | 1800 rpmLimiting Speeds(Grease Lub.): 1800 min-1Limiting Speeds(Oil Lub.): 2300 min-1 | 14.5 kg14500 g |
| KOYO22228RZK+AHX3128Spherical roller bearing |
| 947 kN | 1030 kN | — | 1800 rpmLimiting Speeds(Grease Lub.): 1800 min-1Limiting Speeds(Oil Lub.): 2300 min-1 | 15.4 kg15400 g |
| KOYO22228RZK+H3128Spherical roller bearing |
| 947 kN | 1030 kN | — | 1800 rpmLimiting Speeds(Grease Lub.): 1800 min-1Limiting Speeds(Oil Lub.): 2300 min-1 | 18.8 kg18800 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 22228-2CS5/C3VT143 | Seal on both sides | Not recorded | C3 | Sheet metal | Not recorded | Grease |
| SKF 22228-2CS5K/C3VT143 | Seal on both sides | Not recorded | C3 | Sheet metal | Not recorded | Grease |
| SKF 22228-2CS5K/VT143 | Seal on both sides | Normal | CN | Sheet metal | Not recorded | Grease |
| SKF 22228-2CS5/VT143 | Seal on both sides | Normal | CN | Sheet metal | Not recorded | Grease |
| SKF 22228/C3W33VA9A1 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 22228 CC/C2W33 | Without | Not recorded | C2 | Sheet metal | Not recorded | None |
| SKF 22228 CC/C3W33 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 22228 CC/C3W33VE194 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 22228 CC/C403W33 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 22228 CC/C4W33 | Without | Not recorded | C4 | Sheet metal | Not recorded | None |
| SKF 22228 CC/C5W33 | Without | Not recorded | C5 | Sheet metal | Not recorded | None |
| SKF 22228 CCK/C3W33 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 22228 CCK/C4W33 | Without | Not recorded | C4 | Sheet metal | Not recorded | None |
| SKF 22228 CCK/C5W33 | Without | Not recorded | C5 | Sheet metal | Not recorded | None |
| SKF 22228 CCK/W33 | Without | Normal | CN | Sheet metal | Not recorded | None |
| SKF 22228 CC/W33 | Without | Normal | CN | Sheet metal | Not recorded | None |
| SKF 22228 CC/W513 | Without | Not recorded | CN | Sheet metal | Not recorded | None |
| SKF 22228 K/C3W33VA9A1 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 22228 K/W33VA9A1 | Without | Not recorded | CN | Sheet metal | Not recorded | None |
| SKF 22228/W33VA9A1 | Without | Not recorded | CN | Sheet metal | Not recorded | None |
| FAG 22228-E1A-XL-2RSR-M | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | M — Brass Cage | Not recorded | Not recorded |
| FAG 22228-E1A-XL-K-2RSR-M | Not recorded | Not recorded | Not recorded | M — Brass Cage | Not recorded | Not recorded |
| FAG 22228-E1A-XL-K-2RSR-M-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | M — Brass Cage | Not recorded | Not recorded |
| FAG 22228-E1A-XL-K-M | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | M — Brass Cage | Not recorded | Not recorded |
| FAG 22228-E1A-XL-K-M-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | M — Brass Cage | Not recorded | Not recorded |
| FAG 22228-E1A-XL-K-M-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | M — Brass Cage | Not recorded | Not recorded |
| FAG 22228-E1A-XL-M | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | M — Brass Cage | Not recorded | Not recorded |
| FAG 22228-E1A-XL-M-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | M — Brass Cage | Not recorded | Not recorded |
| FAG 22228-E1-XL | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | JPA — Sheet metal cage | Not recorded | Not recorded |
| FAG 22228-E1-XL-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | JPA — Sheet metal cage | Not recorded | Not recorded |
| FAG 22228-E1-XL-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | JPA — Sheet metal cage | Not recorded | Not recorded |
| FAG 22228-E1-XL-C5 | Not recorded | Not recorded | Not recorded | JPA — Sheet metal cage | Not recorded | Not recorded |
| FAG 22228-E1-XL-K | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | JPA — Sheet metal cage | Not recorded | Not recorded |
| FAG 22228-E1-XL-K-C2 | Not recorded | Not recorded | C2 (Group 2) — Internal clearance smaller than CN | JPA — Sheet metal cage | Not recorded | Not recorded |
| FAG 22228-E1-XL-K-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | JPA — Sheet metal cage | Not recorded | Not recorded |
| FAG 22228-E1-XL-K-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | JPA — Sheet metal cage | Not recorded | Not recorded |
| TIMKEN 22228EJW33 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22228EJW33C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22228EMW33 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22228EMW33C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22228KEJW33 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22228KEJW33C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22228KEJW33C4 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22228KEMAW33C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22228KEMW33 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22228KEMW33C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22228KEMW33C4 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| NSK 22228CAME4 | Not recorded | Not recorded | CN | Machined brass | Not recorded | Not recorded |
| NSK 22228CAMKE4 | Not recorded | Not recorded | CN | Machined brass | Not recorded | Not recorded |
| NSK 22228CDE4 | Not recorded | Not recorded | CN | Pressed steel | Not recorded | Not recorded |
| NSK 22228CDKE4 | Not recorded | Not recorded | CN | Pressed steel | Not recorded | Not recorded |
| KOYO 22228RHR | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 22228RZK+AHX3128 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 22228RZK+H3128 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
SKF
22228-2CS5/C3VT143
Spherical roller bearing with integral sealing and relubrication features
View full technical record →SKF22228-2CS5K/C3VT143
Spherical roller bearing with tapered bore, integral sealing and relubrication features
View full technical record →SKF22228-2CS5K/VT143
Spherical roller bearing with tapered bore, integral sealing and relubrication features
View full technical record →SKF22228-2CS5/VT143
Spherical roller bearing with integral sealing and relubrication features
View full technical record →SKF22228/C3W33VA9A1
Spherical roller bearing for low-speed applications, with relubrication features
View full technical record →NSK22228CAME4
Spherical roller bearing
View full technical record →NSK22228CAMKE4
Spherical roller bearing
View full technical record →SKF22228 CC/C2W33
Spherical roller bearing with relubrication features
View full technical record →SKF22228 CC/C3W33
Spherical roller bearing with relubrication features
View full technical record →SKF22228 CC/C3W33VE194
Spherical roller bearing with locating slots and relubrication features
View full technical record →SKF22228 CC/C403W33
Spherical roller bearing with relubrication features
View full technical record →SKF22228 CC/C4W33
Spherical roller bearing with relubrication features
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.