2222 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 2222. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
2222 dimensions and recorded technical data
The recorded 2222 base designation measures 110×200×53 mm (inside diameter d × outside diameter D × width B). This answer uses unsuffixed records from SKF, NSK. It does not assign the same dimensions or operating ratings to every suffix.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 12 recorded variants are listed. A dash means the value is missing, not zero.
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF2222Self-aligning ball bearing |
| 124 kN | 52 kN | 6000 rpm | 4300 rpm | 6.94 kg6940 g |
| NSK2222Self-aligning ball bearing |
| 135 kN | 51.5 kN | — | — | 6.75 kg6750 g |
| SKF2222 KSelf-aligning ball bearing with tapered bore |
| 124 kN | 52 kN | 6000 rpm | 4300 rpm | 6.66 kg6660 g |
| SKF2222 K/C3Self-aligning ball bearing with tapered bore |
| 124 kN | 52 kN | 6000 rpm | 4300 rpm | 6.67 kg6670 g |
| SKF2222 KMSelf-aligning ball bearing with tapered bore |
| 124 kN | 52 kN | 6000 rpm | 4300 rpm | 7.25 kg7250 g |
| SKF2222 KM/C3Self-aligning ball bearing with tapered bore |
| 124 kN | 52 kN | 6000 rpm | 4300 rpm | 7.09 kg7090 g |
| SKF2222 MSelf-aligning ball bearing |
| 124 kN | 52 kN | 6000 rpm | 4300 rpm | 7.34 kg7340 g |
| FAG2222-K-MSelf-aligning ball bearing |
| 126 kN | 52 kN | 4700 rpm | 5000 rpm | 7.024 kg7024 g |
| FAG2222-K-M-C3Self-aligning ball bearing |
| 126 kN | 52 kN | 4700 rpm | 5000 rpm | 6.94 kg6940 g |
| FAG2222-MSelf-aligning ball bearing |
| 126 kN | 52 kN | 4700 rpm | 5000 rpm | 7.253 kg7253 g |
| FAG2222-M-C3Self-aligning ball bearing |
| 126 kN | 52 kN | 4700 rpm | 5000 rpm | 7.1 kg7100 g |
| NSK2222KSelf-aligning ball bearing |
| 135 kN | 51.5 kN | — | — | — |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 2222 | Without | Not recorded | CN | Sheet metal | Bearing steel | None |
| NSK 2222 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| SKF 2222 K | Without | Not recorded | CN | Sheet metal | Bearing steel | None |
| SKF 2222 K/C3 | Without | Not recorded | C3 | Sheet metal | Bearing steel | None |
| SKF 2222 KM | Without | Not recorded | CN | Machined brass | Bearing steel | None |
| SKF 2222 KM/C3 | Without | Not recorded | C3 | Machined brass | Bearing steel | None |
| SKF 2222 M | Without | Not recorded | CN | Machined brass | Bearing steel | None |
| FAG 2222-K-M | Without — Not sealed | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | M — Solid brass cage, ball guided | Not recorded | Without — Bearing not greased |
| FAG 2222-K-M-C3 | Without — Not sealed | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | M — Solid brass cage, ball guided | Not recorded | Without — Bearing not greased |
| FAG 2222-M | Without — Not sealed | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | M — Solid brass cage, ball guided | Not recorded | Without — Bearing not greased |
| FAG 2222-M-C3 | Without — Not sealed | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | M — Solid brass cage, ball guided | Not recorded | Without — Bearing not greased |
| NSK 2222K | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
2222
Self-aligning ball bearing
View full technical record →NSK2222
Self-aligning ball bearing
View full technical record →SKF22220/C3W33VA9A1
Spherical roller bearing for low-speed applications, with relubrication features
View full technical record →SKF22220/C4W33VA9A1
Spherical roller bearing for low-speed applications, with relubrication features
View full technical record →SKF22220 E
Spherical roller bearing with relubrication features
View full technical record →FAG22220-E1A-XL-K-M
Spherical Roller Bearing
View full technical record →FAG22220-E1A-XL-K-M-C3
Spherical Roller Bearing
View full technical record →FAG22220-E1A-XL-K-M-C4
Spherical Roller Bearing
View full technical record →FAG22220-E1A-XL-M
Spherical Roller Bearing
View full technical record →FAG22220-E1A-XL-M-C2
Spherical Roller Bearing
View full technical record →FAG22220-E1A-XL-M-C3
Spherical Roller Bearing
View full technical record →FAG22220-E1A-XL-M-C4
Spherical Roller Bearing
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.