Find · understand · compare
22219 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 22219. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
22219 dimensions and recorded technical data
Use the named dimensions for each complete record below. A generic d×D×B answer is not asserted where the base record is missing, dimension symbols are unverified, or the product uses a different geometry such as a housing or thrust assembly. Suffix records are not substituted for a missing base specification.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 33 recorded variants are listed. A dash means the value is missing, not zero.
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF22219/C3W33VA9A1Spherical roller bearing for low-speed applications, with relubrication features |
| 322 kN | 430 kN | — | 480 rpm | 4.1 kg4100 g |
| SKF22219/C4W33VA9A1Spherical roller bearing for low-speed applications, with relubrication features |
| 322 kN | 430 kN | — | 480 rpm | 4.1 kg4100 g |
| SKF22219 ESpherical roller bearing with relubrication features |
| 393 kN | 450 kN | 3600 rpm | 4800 rpm | 4.14 kg4140 g |
| SKF22219 E/C3Spherical roller bearing with relubrication features |
| 393 kN | 450 kN | 3600 rpm | 4800 rpm | 4.14 kg4140 g |
| SKF22219 E/C4Spherical roller bearing with relubrication features |
| 393 kN | 450 kN | 3600 rpm | 4800 rpm | 4.14 kg4140 g |
| SKF22219 EKSpherical roller bearing with tapered bore and relubrication features |
| 393 kN | 450 kN | 3600 rpm | 4800 rpm | 4.05 kg4050 g |
| SKF22219 EK/C3Spherical roller bearing with tapered bore and relubrication features |
| 393 kN | 450 kN | 3600 rpm | 4800 rpm | 4.05 kg4050 g |
| SKF22219 K/C3W33VA9A1Spherical roller bearing for low-speed applications, with tapered bore and relubrication features |
| 322 kN | 430 kN | — | 480 rpm | 4 kg4000 g |
| SKF22219 K/W33VA9A1Spherical roller bearing for low-speed applications, with tapered bore and relubrication features |
| 322 kN | 430 kN | — | 480 rpm | 4 kg4000 g |
| SKF22219/W33VA9A1Spherical roller bearing for low-speed applications, with relubrication features |
| 322 kN | 430 kN | — | 480 rpm | 4.1 kg4100 g |
| FAG22219-E1-XLSpherical Roller Bearing |
| 380 kN | 415 kN | 3300 rpm | 4850 rpm | 4.044 kg4044 g |
| FAG22219-E1-XL-C3Spherical Roller Bearing |
| 380 kN | 415 kN | 3300 rpm | 4850 rpm | 4.056 kg4056 g |
| FAG22219-E1-XL-C4Spherical Roller Bearing |
| 380 kN | 415 kN | 3300 rpm | 4850 rpm | 4.043 kg4043 g |
| FAG22219-E1-XL-KSpherical Roller Bearing |
| 380 kN | 415 kN | 3300 rpm | 4850 rpm | 3.958 kg3958 g |
| FAG22219-E1-XL-K-C3Spherical Roller Bearing |
| 380 kN | 415 kN | 3300 rpm | 4850 rpm | 3.97 kg3970 g |
| FAG22219-E1-XL-K-C4Spherical Roller Bearing |
| 380 kN | 415 kN | 3300 rpm | 4850 rpm | 3.957 kg3957 g |
| TIMKEN22219EJW33Spherical roller bearing |
| 385 kN | 441 kN | — | — | 4.05 kg4050 g |
| TIMKEN22219EJW33C2Spherical roller bearing |
| 385 kN | 441 kN | — | — | 4.05 kg4050 g |
| TIMKEN22219EJW33C3Spherical roller bearing |
| 385 kN | 441 kN | — | — | 4.05 kg4050 g |
| TIMKEN22219EJW33C4Spherical roller bearing |
| 385 kN | 441 kN | — | — | 4.05 kg4050 g |
| TIMKEN22219EMW33Spherical roller bearing |
| 385 kN | 441 kN | — | — | 4.11 kg4110 g |
| TIMKEN22219EMW33C3Spherical roller bearing |
| 385 kN | 441 kN | — | — | 4.11 kg4110 g |
| TIMKEN22219KEJW33Spherical roller bearing |
| 385 kN | 441 kN | — | — | 3.96 kg3960 g |
| TIMKEN22219KEJW33C3Spherical roller bearing |
| 385 kN | 441 kN | — | — | 3.96 kg3960 g |
| TIMKEN22219KEJW33C4Spherical roller bearing |
| 385 kN | 441 kN | — | — | 3.96 kg3960 g |
| TIMKEN22219KEJW33W40Spherical roller bearing |
| 385 kN | 441 kN | — | — | 3.95 kg3950 g |
| TIMKEN22219KEMW33Spherical roller bearing |
| 385 kN | 441 kN | — | — | 4.02 kg4020 g |
| TIMKEN22219KEMW33C3Spherical roller bearing |
| 385 kN | 441 kN | — | — | 4.02 kg4020 g |
| NSK22219EAE4Spherical roller bearing |
| 415 kN | 450 kN | — | — | 4.04 kg4040 g |
| NSK22219EAKE4Spherical roller bearing |
| 415 kN | 450 kN | — | — | — |
| KOYO22219RZSpherical roller bearing |
| 417 kN | 422 kN | — | 2800 rpmLimiting Speeds(Grease Lub.): 2800 min-1Limiting Speeds(Oil Lub.): 3600 min-1 | 4.24 kg4240 g |
| KOYO22219RZK+AHX319Spherical roller bearing |
| 417 kN | 422 kN | — | 2800 rpmLimiting Speeds(Grease Lub.): 2800 min-1Limiting Speeds(Oil Lub.): 3600 min-1 | 4.68 kg4680 g |
| KOYO22219RZK+H319XSpherical roller bearing |
| 417 kN | 422 kN | — | 2800 rpmLimiting Speeds(Grease Lub.): 2800 min-1Limiting Speeds(Oil Lub.): 3600 min-1 | 5.77 kg5770 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 22219/C3W33VA9A1 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 22219/C4W33VA9A1 | Without | Not recorded | C4 | Sheet metal | Not recorded | None |
| SKF 22219 E | Without | Normal | CN | Sheet metal | Not recorded | None |
| SKF 22219 E/C3 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 22219 E/C4 | Without | Not recorded | C4 | Sheet metal | Not recorded | None |
| SKF 22219 EK | Without | Normal | CN | Sheet metal | Not recorded | None |
| SKF 22219 EK/C3 | Without | Normal | C3 | Sheet metal | Not recorded | None |
| SKF 22219 K/C3W33VA9A1 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 22219 K/W33VA9A1 | Without | Not recorded | CN | Sheet metal | Not recorded | None |
| SKF 22219/W33VA9A1 | Without | Not recorded | CN | Sheet metal | Not recorded | None |
| FAG 22219-E1-XL | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | JPA — Sheet metal cage | Not recorded | Not recorded |
| FAG 22219-E1-XL-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | JPA — Sheet metal cage | Not recorded | Not recorded |
| FAG 22219-E1-XL-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | JPA — Sheet metal cage | Not recorded | Not recorded |
| FAG 22219-E1-XL-K | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | JPA — Sheet metal cage | Not recorded | Not recorded |
| FAG 22219-E1-XL-K-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | JPA — Sheet metal cage | Not recorded | Not recorded |
| FAG 22219-E1-XL-K-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | JPA — Sheet metal cage | Not recorded | Not recorded |
| TIMKEN 22219EJW33 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22219EJW33C2 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22219EJW33C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22219EJW33C4 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22219EMW33 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22219EMW33C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22219KEJW33 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22219KEJW33C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22219KEJW33C4 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22219KEJW33W40 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22219KEMW33 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22219KEMW33C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| NSK 22219EAE4 | Not recorded | Not recorded | CN | Pressed steel | Not recorded | Not recorded |
| NSK 22219EAKE4 | Not recorded | Not recorded | CN | Pressed steel | Not recorded | Not recorded |
| KOYO 22219RZ | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 22219RZK+AHX319 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 22219RZK+H319X | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
SKF
22219/C3W33VA9A1
Spherical roller bearing for low-speed applications, with relubrication features
View full technical record →SKF22219/C4W33VA9A1
Spherical roller bearing for low-speed applications, with relubrication features
View full technical record →SKF22219 E
Spherical roller bearing with relubrication features
View full technical record →FAG22219-E1-XL
Spherical Roller Bearing
View full technical record →FAG22219-E1-XL-C3
Spherical Roller Bearing
View full technical record →FAG22219-E1-XL-C4
Spherical Roller Bearing
View full technical record →FAG22219-E1-XL-K
Spherical Roller Bearing
View full technical record →FAG22219-E1-XL-K-C3
Spherical Roller Bearing
View full technical record →FAG22219-E1-XL-K-C4
Spherical Roller Bearing
View full technical record →NSK22219EAE4
Spherical roller bearing
View full technical record →NSK22219EAKE4
Spherical roller bearing
View full technical record →SKF22219 E/C3
Spherical roller bearing with relubrication features
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.