Find · understand · compare
22218 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 22218. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
22218 dimensions and recorded technical data
Use the named dimensions for each complete record below. A generic d×D×B answer is not asserted where the base record is missing, dimension symbols are unverified, or the product uses a different geometry such as a housing or thrust assembly. Suffix records are not substituted for a missing base specification.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 52 recorded variants are listed. A dash means the value is missing, not zero.
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF22218/C3W33VA9A1Spherical roller bearing for low-speed applications, with relubrication features |
| 271 kN | 360 kN | — | 530 rpm | 3.35 kg3350 g |
| SKF22218/C4W33VA9A1Spherical roller bearing for low-speed applications, with relubrication features |
| 271 kN | 360 kN | — | 530 rpm | 3.35 kg3350 g |
| SKF22218 ESpherical roller bearing with relubrication features |
| 331 kN | 375 kN | 3800 rpm | 5300 rpm | 3.39 kg3390 g |
| SKF22218 E/C103HSpherical roller bearing with relubrication features |
| 331 kN | 375 kN | 3800 rpm | 5300 rpm | 3.39 kg3390 g |
| SKF22218 E/C2Spherical roller bearing with relubrication features |
| 331 kN | 375 kN | 3800 rpm | 5300 rpm | 3.39 kg3390 g |
| SKF22218 E/C3Spherical roller bearing with relubrication features |
| 331 kN | 375 kN | 3800 rpm | 5300 rpm | 3.39 kg3390 g |
| SKF22218 E/C4Spherical roller bearing with relubrication features |
| 331 kN | 375 kN | 3800 rpm | 5300 rpm | 3.39 kg3390 g |
| SKF22218 EKSpherical roller bearing with tapered bore and relubrication features |
| 331 kN | 375 kN | 3800 rpm | 5300 rpm | 3.33 kg3330 g |
| SKF22218 EK/C3Spherical roller bearing with tapered bore and relubrication features |
| 331 kN | 375 kN | 3800 rpm | 5300 rpm | 3.33 kg3330 g |
| SKF22218 EK/C4Spherical roller bearing with tapered bore and relubrication features |
| 331 kN | 375 kN | 3800 rpm | 5300 rpm | 3.33 kg3330 g |
| SKF22218 K/C3W33VA9A1Spherical roller bearing for low-speed applications, with tapered bore and relubrication features |
| 271 kN | 360 kN | — | 530 rpm | 3.3 kg3300 g |
| SKF22218 K/W33VA9A1Spherical roller bearing for low-speed applications, with tapered bore and relubrication features |
| 271 kN | 360 kN | — | 530 rpm | 3.3 kg3300 g |
| SKF22218/W33VA9A1Spherical roller bearing for low-speed applications, with relubrication features |
| 271 kN | 360 kN | — | 530 rpm | 3.39 kg3390 g |
| FAG22218-E1A-XL-K-MSpherical Roller Bearing |
| 345 kN | 375 kN | 3400 rpm | 5200 rpm | 3.275 kg3275 g |
| FAG22218-E1A-XL-K-M-C3Spherical Roller Bearing |
| 345 kN | 375 kN | 3400 rpm | 5200 rpm | 3.275 kg3275 g |
| FAG22218-E1A-XL-K-M-C4Spherical Roller Bearing |
| 345 kN | 375 kN | 3400 rpm | 5200 rpm | 3.275 kg3275 g |
| FAG22218-E1A-XL-MSpherical Roller Bearing |
| 345 kN | 375 kN | 3400 rpm | 5200 rpm | 3.335 kg3335 g |
| FAG22218-E1A-XL-M-C2Spherical Roller Bearing |
| 345 kN | 375 kN | 3400 rpm | 5200 rpm | 3.335 kg3335 g |
| FAG22218-E1A-XL-M-C3Spherical Roller Bearing |
| 345 kN | 375 kN | 3400 rpm | 5200 rpm | 3.335 kg3335 g |
| FAG22218-E1A-XL-M-C4Spherical Roller Bearing |
| 345 kN | 375 kN | 3400 rpm | 5200 rpm | 3.335 kg3335 g |
| FAG22218-E1-XLSpherical Roller Bearing |
| 345 kN | 375 kN | 3400 rpm | 5200 rpm | 3.36 kg3360 g |
| FAG22218-E1-XL-C2Spherical Roller Bearing |
| 345 kN | 375 kN | 3400 rpm | 5200 rpm | 3.34 kg3340 g |
| FAG22218-E1-XL-C3Spherical Roller Bearing |
| 345 kN | 375 kN | 3400 rpm | 5200 rpm | 3.36 kg3360 g |
| FAG22218-E1-XL-C4Spherical Roller Bearing |
| 345 kN | 375 kN | 3400 rpm | 5200 rpm | 3.335 kg3335 g |
| FAG22218-E1-XL-C5Spherical Roller Bearing |
| 345 kN | 375 kN | 3400 rpm | 5200 rpm | 3.339 kg3339 g |
| FAG22218-E1-XL-H151B-C3Spherical Roller Bearing |
| 345 kN | 375 kN | 3400 rpm | 5200 rpm | 3.42 kg3420 g |
| FAG22218-E1-XL-KSpherical Roller Bearing |
| 345 kN | 375 kN | 3400 rpm | 5200 rpm | 3.286 kg3286 g |
| FAG22218-E1-XL-K-C2Spherical Roller Bearing |
| 345 kN | 375 kN | 3400 rpm | 5200 rpm | 3.26 kg3260 g |
| FAG22218-E1-XL-K-C3Spherical Roller Bearing |
| 345 kN | 375 kN | 3400 rpm | 5200 rpm | 3.286 kg3286 g |
| FAG22218-E1-XL-K-C4Spherical Roller Bearing |
| 345 kN | 375 kN | 3400 rpm | 5200 rpm | 3.26 kg3260 g |
| TIMKEN22218EJW33Spherical roller bearing |
| 355 kN | 388 kN | — | — | 3.3 kg3300 g |
| TIMKEN22218EJW33C2Spherical roller bearing |
| 355 kN | 388 kN | — | — | 3.3 kg3300 g |
| TIMKEN22218EJW33C3Spherical roller bearing |
| 355 kN | 388 kN | — | — | 3.3 kg3300 g |
| TIMKEN22218EJW33C3SLASpherical roller bearing |
| 355 kN | 388 kN | — | — | 3.38 kg3380 g |
| TIMKEN22218EJW33C4Spherical roller bearing |
| 355 kN | 388 kN | — | — | 3.3 kg3300 g |
| TIMKEN22218EJW33C5Spherical roller bearing |
| 355 kN | 388 kN | — | — | 3.3 kg3300 g |
| TIMKEN22218EJW841C4Spherical roller bearing |
| 355 kN | 388 kN | — | — | 3.34 kg3340 g |
| TIMKEN22218EMAW33W800C3Spherical roller bearing |
| 341 kN | 366 kN | — | — | 3.34 kg3340 g |
| TIMKEN22218EMW33Spherical roller bearing |
| 355 kN | 388 kN | — | — | 3.34 kg3340 g |
| TIMKEN22218EMW33C3Spherical roller bearing |
| 355 kN | 388 kN | — | — | 3.34 kg3340 g |
| TIMKEN22218EMW33W800C4Spherical roller bearing |
| 355 kN | 388 kN | — | — | 3.34 kg3340 g |
| TIMKEN22218KEJW33Spherical roller bearing |
| 355 kN | 388 kN | — | — | 3.22 kg3220 g |
| TIMKEN22218KEJW33C2Spherical roller bearing |
| 355 kN | 388 kN | — | — | 3.22 kg3220 g |
| TIMKEN22218KEJW33C3Spherical roller bearing |
| 355 kN | 388 kN | — | — | 3.22 kg3220 g |
| TIMKEN22218KEJW33C4Spherical roller bearing |
| 355 kN | 388 kN | — | — | 3.22 kg3220 g |
| TIMKEN22218KEMW33Spherical roller bearing |
| 355 kN | 388 kN | — | — | 3.27 kg3270 g |
| TIMKEN22218KEMW33C3Spherical roller bearing |
| 355 kN | 388 kN | — | — | 3.27 kg3270 g |
| NSK22218EAE4Spherical roller bearing |
| 360 kN | 395 kN | — | — | 3.3 kg3300 g |
| NSK22218EAKE4Spherical roller bearing |
| 360 kN | 395 kN | — | — | — |
| KOYO22218RZSpherical roller bearing |
| 372 kN | 381 kN | — | 2900 rpmLimiting Speeds(Grease Lub.): 2900 min-1Limiting Speeds(Oil Lub.): 3900 min-1 | 3.5 kg3500 g |
| KOYO22218RZK+AHX318Spherical roller bearing |
| 372 kN | 381 kN | — | 2900 rpmLimiting Speeds(Grease Lub.): 2900 min-1Limiting Speeds(Oil Lub.): 3900 min-1 | 3.89 kg3890 g |
| KOYO22218RZK+H318XSpherical roller bearing |
| 372 kN | 381 kN | — | 2900 rpmLimiting Speeds(Grease Lub.): 2900 min-1Limiting Speeds(Oil Lub.): 3900 min-1 | 4.88 kg4880 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 22218/C3W33VA9A1 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 22218/C4W33VA9A1 | Without | Not recorded | C4 | Sheet metal | Not recorded | None |
| SKF 22218 E | Without | Normal | CN | Sheet metal | Not recorded | None |
| SKF 22218 E/C103H | Without | Not recorded | C3H | Sheet metal | Not recorded | None |
| SKF 22218 E/C2 | Without | Not recorded | C2 | Sheet metal | Not recorded | None |
| SKF 22218 E/C3 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 22218 E/C4 | Without | Not recorded | C4 | Sheet metal | Not recorded | None |
| SKF 22218 EK | Without | Normal | CN | Sheet metal | Not recorded | None |
| SKF 22218 EK/C3 | Without | Normal | C3 | Sheet metal | Not recorded | None |
| SKF 22218 EK/C4 | Without | Normal | C4 | Sheet metal | Not recorded | None |
| SKF 22218 K/C3W33VA9A1 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 22218 K/W33VA9A1 | Without | Not recorded | CN | Sheet metal | Not recorded | None |
| SKF 22218/W33VA9A1 | Without | Not recorded | CN | Sheet metal | Not recorded | None |
| FAG 22218-E1A-XL-K-M | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | M — Brass Cage | Not recorded | Not recorded |
| FAG 22218-E1A-XL-K-M-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | M — Brass Cage | Not recorded | Not recorded |
| FAG 22218-E1A-XL-K-M-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | M — Brass Cage | Not recorded | Not recorded |
| FAG 22218-E1A-XL-M | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | M — Brass Cage | Not recorded | Not recorded |
| FAG 22218-E1A-XL-M-C2 | Not recorded | Not recorded | C2 (Group 2) — Internal clearance smaller than CN | M — Brass Cage | Not recorded | Not recorded |
| FAG 22218-E1A-XL-M-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | M — Brass Cage | Not recorded | Not recorded |
| FAG 22218-E1A-XL-M-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | M — Brass Cage | Not recorded | Not recorded |
| FAG 22218-E1-XL | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | JPA — Sheet metal cage | Not recorded | Not recorded |
| FAG 22218-E1-XL-C2 | Not recorded | Not recorded | C2 (Group 2) — Internal clearance smaller than CN | JPA — Sheet metal cage | Not recorded | Not recorded |
| FAG 22218-E1-XL-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | JPA — Sheet metal cage | Not recorded | Not recorded |
| FAG 22218-E1-XL-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | JPA — Sheet metal cage | Not recorded | Not recorded |
| FAG 22218-E1-XL-C5 | Not recorded | Not recorded | Not recorded | JPA — Sheet metal cage | Not recorded | Not recorded |
| FAG 22218-E1-XL-H151B-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | JPA — Sheet metal cage | Not recorded | Not recorded |
| FAG 22218-E1-XL-K | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | JPA — Sheet metal cage | Not recorded | Not recorded |
| FAG 22218-E1-XL-K-C2 | Not recorded | Not recorded | C2 (Group 2) — Internal clearance smaller than CN | JPA — Sheet metal cage | Not recorded | Not recorded |
| FAG 22218-E1-XL-K-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | JPA — Sheet metal cage | Not recorded | Not recorded |
| FAG 22218-E1-XL-K-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | JPA — Sheet metal cage | Not recorded | Not recorded |
| TIMKEN 22218EJW33 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22218EJW33C2 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22218EJW33C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22218EJW33C3SLA | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22218EJW33C4 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22218EJW33C5 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22218EJW841C4 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22218EMAW33W800C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22218EMW33 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22218EMW33C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22218EMW33W800C4 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22218KEJW33 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22218KEJW33C2 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22218KEJW33C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22218KEJW33C4 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22218KEMW33 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22218KEMW33C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| NSK 22218EAE4 | Not recorded | Not recorded | CN | Pressed steel | Not recorded | Not recorded |
| NSK 22218EAKE4 | Not recorded | Not recorded | CN | Pressed steel | Not recorded | Not recorded |
| KOYO 22218RZ | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 22218RZK+AHX318 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 22218RZK+H318X | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
SKF
22218/C3W33VA9A1
Spherical roller bearing for low-speed applications, with relubrication features
View full technical record →SKF22218/C4W33VA9A1
Spherical roller bearing for low-speed applications, with relubrication features
View full technical record →SKF22218 E
Spherical roller bearing with relubrication features
View full technical record →FAG22218-E1A-XL-K-M
Spherical Roller Bearing
View full technical record →FAG22218-E1A-XL-K-M-C3
Spherical Roller Bearing
View full technical record →FAG22218-E1A-XL-K-M-C4
Spherical Roller Bearing
View full technical record →FAG22218-E1A-XL-M
Spherical Roller Bearing
View full technical record →FAG22218-E1A-XL-M-C2
Spherical Roller Bearing
View full technical record →FAG22218-E1A-XL-M-C3
Spherical Roller Bearing
View full technical record →FAG22218-E1A-XL-M-C4
Spherical Roller Bearing
View full technical record →FAG22218-E1-XL
Spherical Roller Bearing
View full technical record →FAG22218-E1-XL-C2
Spherical Roller Bearing
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.