Find · understand · compare
22217 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 22217. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
22217 dimensions and recorded technical data
Use the named dimensions for each complete record below. A generic d×D×B answer is not asserted where the base record is missing, dimension symbols are unverified, or the product uses a different geometry such as a housing or thrust assembly. Suffix records are not substituted for a missing base specification.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 45 recorded variants are listed. A dash means the value is missing, not zero.
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF22217/C3W33VA9A1Spherical roller bearing for low-speed applications, with relubrication features |
| 239 kN | 320 kN | — | 560 rpm | 2.65 kg2650 g |
| SKF22217/C4W33VA9A1Spherical roller bearing for low-speed applications, with relubrication features |
| 239 kN | 320 kN | — | 560 rpm | 2.65 kg2650 g |
| SKF22217 ESpherical roller bearing with relubrication features |
| 291 kN | 325 kN | 4000 rpm | 5600 rpm | 2.68 kg2680 g |
| SKF22217 E/C2Spherical roller bearing with relubrication features |
| 291 kN | 325 kN | 4000 rpm | 5600 rpm | 2.68 kg2680 g |
| SKF22217 E/C3Spherical roller bearing with relubrication features |
| 291 kN | 325 kN | 4000 rpm | 5600 rpm | 2.68 kg2680 g |
| SKF22217 E/C4Spherical roller bearing with relubrication features |
| 291 kN | 325 kN | 4000 rpm | 5600 rpm | 2.68 kg2680 g |
| SKF22217 EKSpherical roller bearing with tapered bore and relubrication features |
| 291 kN | 325 kN | 4000 rpm | 5600 rpm | 2.61 kg2610 g |
| SKF22217 EK/C3Spherical roller bearing with tapered bore and relubrication features |
| 291 kN | 325 kN | 4000 rpm | 5600 rpm | 2.61 kg2610 g |
| SKF22217 EK/C4Spherical roller bearing with tapered bore and relubrication features |
| 291 kN | 325 kN | 4000 rpm | 5600 rpm | 2.61 kg2610 g |
| SKF22217 EK/VA751Spherical roller bearing with tapered bore and relubrication features |
| 291 kN | 325 kN | 4000 rpm | 5600 rpm | 2.62 kg2620 g |
| SKF22217 K/C3W33VA9A1Spherical roller bearing for low-speed applications, with tapered bore and relubrication features |
| 239 kN | 320 kN | — | 560 rpm | 2.6 kg2600 g |
| SKF22217 K/W33VA9A1Spherical roller bearing for low-speed applications, with tapered bore and relubrication features |
| 239 kN | 320 kN | — | 560 rpm | 2.6 kg2600 g |
| SKF22217/W33VA9A1Spherical roller bearing for low-speed applications, with relubrication features |
| 239 kN | 320 kN | — | 560 rpm | 2.65 kg2650 g |
| FAG22217-E1A-XL-K-MSpherical Roller Bearing |
| 305 kN | 325 kN | 3450 rpm | 5700 rpm | 2.557 kg2557 g |
| FAG22217-E1A-XL-K-M-C3Spherical Roller Bearing |
| 305 kN | 325 kN | 3450 rpm | 5700 rpm | 2.55 kg2550 g |
| FAG22217-E1A-XL-K-M-C4Spherical Roller Bearing |
| 305 kN | 325 kN | 3450 rpm | 5700 rpm | 2.556 kg2556 g |
| FAG22217-E1A-XL-MSpherical Roller Bearing |
| 305 kN | 325 kN | 3450 rpm | 5700 rpm | 2.605 kg2605 g |
| FAG22217-E1A-XL-M-C2Spherical Roller Bearing |
| 305 kN | 325 kN | 3450 rpm | 5700 rpm | 2.6 kg2600 g |
| FAG22217-E1A-XL-M-C3Spherical Roller Bearing |
| 305 kN | 325 kN | 3450 rpm | 5700 rpm | 2.607 kg2607 g |
| FAG22217-E1A-XL-M-C4Spherical Roller Bearing |
| 305 kN | 325 kN | 3450 rpm | 5700 rpm | 2.601 kg2601 g |
| FAG22217-E1-XLSpherical Roller Bearing |
| 305 kN | 325 kN | 3450 rpm | 5700 rpm | 2.616 kg2616 g |
| FAG22217-E1-XL-C2Spherical Roller Bearing |
| 305 kN | 325 kN | 3450 rpm | 5700 rpm | 2.605 kg2605 g |
| FAG22217-E1-XL-C3Spherical Roller Bearing |
| 305 kN | 325 kN | 3450 rpm | 5700 rpm | 2.616 kg2616 g |
| FAG22217-E1-XL-C4Spherical Roller Bearing |
| 305 kN | 325 kN | 3450 rpm | 5700 rpm | 2.601 kg2601 g |
| FAG22217-E1-XL-H151Spherical Roller Bearing |
| 305 kN | 325 kN | 3450 rpm | 5700 rpm | 2.601 kg2601 g |
| FAG22217-E1-XL-KSpherical Roller Bearing |
| 305 kN | 325 kN | 3450 rpm | 5700 rpm | 2.56 kg2560 g |
| FAG22217-E1-XL-K-C3Spherical Roller Bearing |
| 305 kN | 325 kN | 3450 rpm | 5700 rpm | 2.56 kg2560 g |
| FAG22217-E1-XL-K-C4Spherical Roller Bearing |
| 305 kN | 325 kN | 3450 rpm | 5700 rpm | 2.546 kg2546 g |
| TIMKEN22217EJW33Spherical roller bearing |
| 297 kN | 320 kN | — | — | 2.55 kg2550 g |
| TIMKEN22217EJW33C2Spherical roller bearing |
| 297 kN | 320 kN | — | — | 2.55 kg2550 g |
| TIMKEN22217EJW33C3Spherical roller bearing |
| 297 kN | 320 kN | — | — | 2.55 kg2550 g |
| TIMKEN22217EJW33C4Spherical roller bearing |
| 297 kN | 320 kN | — | — | 2.55 kg2550 g |
| TIMKEN22217EJW841Spherical roller bearing |
| 297 kN | 320 kN | — | — | 2.59 kg2590 g |
| TIMKEN22217EMW33Spherical roller bearing |
| 286 kN | 302 kN | — | — | 2.53 kg2530 g |
| TIMKEN22217EMW33C3Spherical roller bearing |
| 286 kN | 302 kN | — | — | 2.53 kg2530 g |
| TIMKEN22217KEJW33Spherical roller bearing |
| 297 kN | 320 kN | — | — | 2.49 kg2490 g |
| TIMKEN22217KEJW33C3Spherical roller bearing |
| 297 kN | 320 kN | — | — | 2.49 kg2490 g |
| TIMKEN22217KEJW33S2C3Spherical roller bearing |
| 297 kN | 320 kN | — | — | 2.49 kg2490 g |
| TIMKEN22217KEMW33Spherical roller bearing |
| 286 kN | 302 kN | — | — | 2.48 kg2480 g |
| TIMKEN22217KEMW33C3Spherical roller bearing |
| 286 kN | 302 kN | — | — | 2.48 kg2480 g |
| NSK22217EAE4Spherical roller bearing |
| 310 kN | 325 kN | — | — | 2.54 kg2540 g |
| NSK22217EAKE4Spherical roller bearing |
| 310 kN | 325 kN | — | — | — |
| KOYO22217RZSpherical roller bearing |
| 322 kN | 324 kN | — | 3000 rpmLimiting Speeds(Grease Lub.): 3000 min-1Limiting Speeds(Oil Lub.): 4100 min-1 | 2.75 kg2750 g |
| KOYO22217RZK+AHX317Spherical roller bearing |
| 322 kN | 324 kN | — | 3000 rpmLimiting Speeds(Grease Lub.): 3000 min-1Limiting Speeds(Oil Lub.): 4100 min-1 | 3.12 kg3120 g |
| KOYO22217RZK+H317XSpherical roller bearing |
| 322 kN | 324 kN | — | 3000 rpmLimiting Speeds(Grease Lub.): 3000 min-1Limiting Speeds(Oil Lub.): 4100 min-1 | 3.93 kg3930 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 22217/C3W33VA9A1 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 22217/C4W33VA9A1 | Without | Not recorded | C4 | Sheet metal | Not recorded | None |
| SKF 22217 E | Without | Normal | CN | Sheet metal | Not recorded | None |
| SKF 22217 E/C2 | Without | Not recorded | C2 | Sheet metal | Not recorded | None |
| SKF 22217 E/C3 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 22217 E/C4 | Without | Not recorded | C4 | Sheet metal | Not recorded | None |
| SKF 22217 EK | Without | Normal | CN | Sheet metal | Not recorded | None |
| SKF 22217 EK/C3 | Without | Normal | C3 | Sheet metal | Not recorded | None |
| SKF 22217 EK/C4 | Without | Normal | C4 | Sheet metal | Not recorded | None |
| SKF 22217 EK/VA751 | Without | Not recorded | Special | Sheet metal | Not recorded | None |
| SKF 22217 K/C3W33VA9A1 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 22217 K/W33VA9A1 | Without | Not recorded | CN | Sheet metal | Not recorded | None |
| SKF 22217/W33VA9A1 | Without | Not recorded | CN | Sheet metal | Not recorded | None |
| FAG 22217-E1A-XL-K-M | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | M — Brass Cage | Not recorded | Not recorded |
| FAG 22217-E1A-XL-K-M-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | M — Brass Cage | Not recorded | Not recorded |
| FAG 22217-E1A-XL-K-M-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | M — Brass Cage | Not recorded | Not recorded |
| FAG 22217-E1A-XL-M | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | M — Brass Cage | Not recorded | Not recorded |
| FAG 22217-E1A-XL-M-C2 | Not recorded | Not recorded | C2 (Group 2) — Internal clearance smaller than CN | M — Brass Cage | Not recorded | Not recorded |
| FAG 22217-E1A-XL-M-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | M — Brass Cage | Not recorded | Not recorded |
| FAG 22217-E1A-XL-M-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | M — Brass Cage | Not recorded | Not recorded |
| FAG 22217-E1-XL | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | JPA — Sheet metal cage | Not recorded | Not recorded |
| FAG 22217-E1-XL-C2 | Not recorded | Not recorded | C2 (Group 2) — Internal clearance smaller than CN | JPA — Sheet metal cage | Not recorded | Not recorded |
| FAG 22217-E1-XL-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | JPA — Sheet metal cage | Not recorded | Not recorded |
| FAG 22217-E1-XL-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | JPA — Sheet metal cage | Not recorded | Not recorded |
| FAG 22217-E1-XL-H151 | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | JPA — Sheet metal cage | Not recorded | Not recorded |
| FAG 22217-E1-XL-K | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | JPA — Sheet metal cage | Not recorded | Not recorded |
| FAG 22217-E1-XL-K-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | JPA — Sheet metal cage | Not recorded | Not recorded |
| FAG 22217-E1-XL-K-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | JPA — Sheet metal cage | Not recorded | Not recorded |
| TIMKEN 22217EJW33 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22217EJW33C2 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22217EJW33C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22217EJW33C4 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22217EJW841 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22217EMW33 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22217EMW33C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22217KEJW33 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22217KEJW33C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22217KEJW33S2C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22217KEMW33 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22217KEMW33C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| NSK 22217EAE4 | Not recorded | Not recorded | CN | Pressed steel | Not recorded | Not recorded |
| NSK 22217EAKE4 | Not recorded | Not recorded | CN | Pressed steel | Not recorded | Not recorded |
| KOYO 22217RZ | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 22217RZK+AHX317 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 22217RZK+H317X | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
SKF
22217/C3W33VA9A1
Spherical roller bearing for low-speed applications, with relubrication features
View full technical record →SKF22217/C4W33VA9A1
Spherical roller bearing for low-speed applications, with relubrication features
View full technical record →SKF22217 E
Spherical roller bearing with relubrication features
View full technical record →FAG22217-E1A-XL-K-M
Spherical Roller Bearing
View full technical record →FAG22217-E1A-XL-K-M-C3
Spherical Roller Bearing
View full technical record →FAG22217-E1A-XL-K-M-C4
Spherical Roller Bearing
View full technical record →FAG22217-E1A-XL-M
Spherical Roller Bearing
View full technical record →FAG22217-E1A-XL-M-C2
Spherical Roller Bearing
View full technical record →FAG22217-E1A-XL-M-C3
Spherical Roller Bearing
View full technical record →FAG22217-E1A-XL-M-C4
Spherical Roller Bearing
View full technical record →FAG22217-E1-XL
Spherical Roller Bearing
View full technical record →FAG22217-E1-XL-C2
Spherical Roller Bearing
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.