Find · understand · compare
22214 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 22214. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
22214 dimensions and recorded technical data
Use the named dimensions for each complete record below. A generic d×D×B answer is not asserted where the base record is missing, dimension symbols are unverified, or the product uses a different geometry such as a housing or thrust assembly. Suffix records are not substituted for a missing base specification.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 39 recorded variants are listed. A dash means the value is missing, not zero.
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF22214/C3W33VA9A1Spherical roller bearing for low-speed applications, with relubrication features |
| 173 kN | 224 kN | — | 670 rpm | 1.6 kg1600 g |
| SKF22214/C4W33VA9A1Spherical roller bearing for low-speed applications, with relubrication features |
| 173 kN | 224 kN | — | 670 rpm | 1.6 kg1600 g |
| SKF22214 ESpherical roller bearing with relubrication features |
| 213 kN | 228 kN | 5000 rpm | 6700 rpm | 1.6 kg1600 g |
| SKF22214 E/C3Spherical roller bearing with relubrication features |
| 213 kN | 228 kN | 5000 rpm | 6700 rpm | 1.6 kg1600 g |
| SKF22214 E/C4Spherical roller bearing with relubrication features |
| 213 kN | 228 kN | 5000 rpm | 6700 rpm | 1.6 kg1600 g |
| SKF22214 EKSpherical roller bearing with tapered bore and relubrication features |
| 213 kN | 228 kN | 5000 rpm | 6700 rpm | 1.56 kg1560 g |
| SKF22214 EK/C3Spherical roller bearing with tapered bore and relubrication features |
| 213 kN | 228 kN | 5000 rpm | 6700 rpm | 1.56 kg1560 g |
| SKF22214 K/C3W33VA9A1Spherical roller bearing for low-speed applications, with tapered bore and relubrication features |
| 173 kN | 224 kN | — | 670 rpm | 1.55 kg1550 g |
| SKF22214 K/W33VA9A1Spherical roller bearing for low-speed applications, with tapered bore and relubrication features |
| 173 kN | 224 kN | — | 670 rpm | 1.55 kg1550 g |
| SKF22214/W33VA9A1Spherical roller bearing for low-speed applications, with relubrication features |
| 173 kN | 224 kN | — | 670 rpm | 1.6 kg1600 g |
| FAG22214-E1A-XL-K-MSpherical Roller Bearing |
| 211 kN | 226 kN | 3950 rpm | 6700 rpm | 1.5 kg1500 g |
| FAG22214-E1A-XL-K-M-C3Spherical Roller Bearing |
| 211 kN | 226 kN | 3950 rpm | 6700 rpm | 1.558 kg1558 g |
| FAG22214-E1A-XL-MSpherical Roller Bearing |
| 211 kN | 226 kN | 3950 rpm | 6700 rpm | 1.59 kg1590 g |
| FAG22214-E1A-XL-M-C3Spherical Roller Bearing |
| 211 kN | 226 kN | 3950 rpm | 6700 rpm | 1.5 kg1500 g |
| FAG22214-E1A-XL-M-C4Spherical Roller Bearing |
| 211 kN | 226 kN | 3950 rpm | 6700 rpm | 1.5 kg1500 g |
| FAG22214-E1-XLSpherical Roller Bearing |
| 211 kN | 226 kN | 3950 rpm | 6700 rpm | 1.6 kg1600 g |
| FAG22214-E1-XL-C2Spherical Roller Bearing |
| 211 kN | 226 kN | 3950 rpm | 6700 rpm | 1.636 kg1636 g |
| FAG22214-E1-XL-C3Spherical Roller Bearing |
| 211 kN | 226 kN | 3950 rpm | 6700 rpm | 1.6 kg1600 g |
| FAG22214-E1-XL-C4Spherical Roller Bearing |
| 211 kN | 226 kN | 3950 rpm | 6700 rpm | 1.632 kg1632 g |
| FAG22214-E1-XL-KSpherical Roller Bearing |
| 211 kN | 226 kN | 3950 rpm | 6700 rpm | 1.559 kg1559 g |
| FAG22214-E1-XL-K-C3Spherical Roller Bearing |
| 211 kN | 226 kN | 3950 rpm | 6700 rpm | 1.56 kg1560 g |
| TIMKEN22214EJSpherical roller bearing |
| 213 kN | 231 kN | — | — | 1.61 kg1610 g |
| TIMKEN22214EJC3Spherical roller bearing |
| 213 kN | 231 kN | — | — | 1.61 kg1610 g |
| TIMKEN22214EJW33Spherical roller bearing |
| 213 kN | 231 kN | — | — | 1.59 kg1590 g |
| TIMKEN22214EJW33C2Spherical roller bearing |
| 213 kN | 231 kN | — | — | 1.59 kg1590 g |
| TIMKEN22214EJW33C3Spherical roller bearing |
| 213 kN | 231 kN | — | — | 1.59 kg1590 g |
| TIMKEN22214EJW33C4Spherical roller bearing |
| 213 kN | 231 kN | — | — | 1.59 kg1590 g |
| TIMKEN22214EJW33S2C3Spherical roller bearing |
| 213 kN | 231 kN | — | — | 1.59 kg1590 g |
| TIMKEN22214EJW841Spherical roller bearing |
| 213 kN | 231 kN | — | — | 1.6 kg1600 g |
| TIMKEN22214EMSpherical roller bearing |
| 205 kN | 219 kN | — | — | 1.59 kg1590 g |
| TIMKEN22214EMC3Spherical roller bearing |
| 205 kN | 219 kN | — | — | 1.59 kg1590 g |
| TIMKEN22214EMW33C3Spherical roller bearing |
| 205 kN | 219 kN | — | — | 1.59 kg1590 g |
| TIMKEN22214EMWSLBC3Spherical roller bearing |
| 205 kN | 219 kN | — | — | 1.65 kg1650 g |
| TIMKEN22214KEJW33Spherical roller bearing |
| 213 kN | 231 kN | — | — | 1.55 kg1550 g |
| TIMKEN22214KEJW33C3Spherical roller bearing |
| 213 kN | 231 kN | — | — | 1.55 kg1550 g |
| NSK22214EAE4Spherical roller bearing |
| 225 kN | 232 kN | — | — | 1.58 kg1580 g |
| NSK22214EAKE4Spherical roller bearing |
| 225 kN | 232 kN | — | — | — |
| KOYO22214RZSpherical roller bearing |
| 233 kN | 222 kN | — | 3700 rpmLimiting Speeds(Grease Lub.): 3700 min-1Limiting Speeds(Oil Lub.): 5000 min-1 | 1.64 kg1640 g |
| KOYO22214RZK+AH314Spherical roller bearing |
| 233 kN | 222 kN | — | 3700 rpmLimiting Speeds(Grease Lub.): 3700 min-1Limiting Speeds(Oil Lub.): 5000 min-1 | 1.89 kg1890 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 22214/C3W33VA9A1 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 22214/C4W33VA9A1 | Without | Not recorded | C4 | Sheet metal | Not recorded | None |
| SKF 22214 E | Without | Normal | CN | Sheet metal | Not recorded | None |
| SKF 22214 E/C3 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 22214 E/C4 | Without | Not recorded | C4 | Sheet metal | Not recorded | None |
| SKF 22214 EK | Without | Normal | CN | Sheet metal | Not recorded | None |
| SKF 22214 EK/C3 | Without | Normal | C3 | Sheet metal | Not recorded | None |
| SKF 22214 K/C3W33VA9A1 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 22214 K/W33VA9A1 | Without | Not recorded | CN | Sheet metal | Not recorded | None |
| SKF 22214/W33VA9A1 | Without | Not recorded | CN | Sheet metal | Not recorded | None |
| FAG 22214-E1A-XL-K-M | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | M — Brass Cage | Not recorded | Not recorded |
| FAG 22214-E1A-XL-K-M-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | M — Brass Cage | Not recorded | Not recorded |
| FAG 22214-E1A-XL-M | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | M — Brass Cage | Not recorded | Not recorded |
| FAG 22214-E1A-XL-M-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | M — Brass Cage | Not recorded | Not recorded |
| FAG 22214-E1A-XL-M-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | M — Brass Cage | Not recorded | Not recorded |
| FAG 22214-E1-XL | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | JPA — Sheet metal cage | Not recorded | Not recorded |
| FAG 22214-E1-XL-C2 | Not recorded | Not recorded | C2 (Group 2) — Internal clearance smaller than CN | JPA — Sheet metal cage | Not recorded | Not recorded |
| FAG 22214-E1-XL-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | JPA — Sheet metal cage | Not recorded | Not recorded |
| FAG 22214-E1-XL-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | JPA — Sheet metal cage | Not recorded | Not recorded |
| FAG 22214-E1-XL-K | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | JPA — Sheet metal cage | Not recorded | Not recorded |
| FAG 22214-E1-XL-K-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | JPA — Sheet metal cage | Not recorded | Not recorded |
| TIMKEN 22214EJ | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22214EJC3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22214EJW33 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22214EJW33C2 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22214EJW33C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22214EJW33C4 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22214EJW33S2C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22214EJW841 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22214EM | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22214EMC3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22214EMW33C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22214EMWSLBC3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22214KEJW33 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22214KEJW33C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| NSK 22214EAE4 | Not recorded | Not recorded | CN | Pressed steel | Not recorded | Not recorded |
| NSK 22214EAKE4 | Not recorded | Not recorded | CN | Pressed steel | Not recorded | Not recorded |
| KOYO 22214RZ | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 22214RZK+AH314 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
SKF
22214/C3W33VA9A1
Spherical roller bearing for low-speed applications, with relubrication features
View full technical record →SKF22214/C4W33VA9A1
Spherical roller bearing for low-speed applications, with relubrication features
View full technical record →SKF22214 E
Spherical roller bearing with relubrication features
View full technical record →FAG22214-E1A-XL-K-M
Spherical Roller Bearing
View full technical record →FAG22214-E1A-XL-K-M-C3
Spherical Roller Bearing
View full technical record →FAG22214-E1A-XL-M
Spherical Roller Bearing
View full technical record →FAG22214-E1A-XL-M-C3
Spherical Roller Bearing
View full technical record →FAG22214-E1A-XL-M-C4
Spherical Roller Bearing
View full technical record →FAG22214-E1-XL
Spherical Roller Bearing
View full technical record →FAG22214-E1-XL-C2
Spherical Roller Bearing
View full technical record →FAG22214-E1-XL-C3
Spherical Roller Bearing
View full technical record →FAG22214-E1-XL-C4
Spherical Roller Bearing
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.