22213 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 22213. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
22213 dimensions and recorded technical data
Use the named dimensions for each complete record below. A generic d×D×B answer is not asserted where the base record is missing, dimension symbols are unverified, or the product uses a different geometry such as a housing or thrust assembly. Suffix records are not substituted for a missing base specification.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 46 recorded variants are listed. A dash means the value is missing, not zero.
Read the original dimensions for 22213
Boundary size alone does not describe every ring, shoulder or assembled unit. These tables retain the recorded manufacturer labels, symbols, units and limits for each complete marking. Expand a record to check its detailed measurements.
Important: an approximate value, a minimum or a maximum keeps that qualifier. These reference extracts are not CAD drawings, fit recommendations or replacement approvals.
SKF 22213 EK/C3 — 3 dimension fields
Spherical roller bearing with tapered bore and relubrication features. Source: SKF product catalogue; recorded snapshot 2026-09-02.
The source gives named dimensions but no drawing symbol for some values. An unqualified width is not relabelled as inner-ring B or assembly T.
For a tapered bearing, total assembly width T, inner-ring width B and outer-ring width C are different measurements. Keep the complete cup/cone or matched assembly designation; do not replace T with B when checking available axial space.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | Not supplied separately | 65.0 mm |
| Outside diameter | Not supplied separately | 120.0 mm |
| Width | Not supplied separately | 31.0 mm |
Catalogue parameters for 22213
Choose the complete brand and marking before reading a value. These source-labelled records add dimensions, construction and engineering properties where they were recorded; a shared model number does not establish interchangeability.
Units, ranges and minimum/maximum qualifiers are retained. The data is a dated catalogue reference, not a certified drawing, a complete current specification or an operating approval.
SKF 22213 EK/C3 — 19 recorded parameters
Spherical roller bearing with tapered bore and relubrication features
Reference: SKF product catalogue; source snapshot 2026-09-02.
SKF 22213 EK/C3 has a nominal bearing envelope of 65×120×31 mm, in bore × outside diameter × width order. This answer belongs to the complete EK/C3 marking, not to every bearing sharing its base number.
Calculated inch reference (bore × outside diameter × width): 2.559055 × 4.724409 × 1.220472 in. This converts the recorded millimetres using exactly 25.4 mm/in and rounds to six decimals; it does not change the nominal series or supply machining tolerances.
The recorded construction has a tapered bore. These boundary dimensions do not identify the cylindrical shaft diameter, adapter sleeve, drive-up distance or final mounted clearance; those require the mounting arrangement and applicable source instructions.
Keep total assembly width distinct from inner- and outer-ring widths. The same nominal bore does not establish a matching cup/cone set.
Values shown are retained from the recorded source. Zero boundary dimensions and zero load ratings from incomplete legacy feeds are withheld rather than presented as usable specifications.
Dimensions
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | Not separately recorded | 65.0 mm |
| Outside diameter | Not separately recorded | 120.0 mm |
| Width | Not separately recorded | 31.0 mm |
Performance
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Basic dynamic load rating | Not separately recorded | 198.0 kN |
| Basic static load rating | Not separately recorded | 216.0 kN |
| Reference speed | Not separately recorded | 5000.0 r/min |
| Limiting speed | Not separately recorded | 7000.0 r/min |
| SKF performance class | Not separately recorded | SKF Explorer |
Properties
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Number of rows | Not separately recorded | 2 |
| Locating feature, bearing outer ring | Not separately recorded | Without |
| Bore type | Not separately recorded | Tapered 1:12 |
| Cage | Not separately recorded | Sheet metal |
| Radial internal clearance | Not separately recorded | C3 |
| Tolerance class for dimensions | Not separately recorded | Normal |
| Tolerance class for run-out | Not separately recorded | P5 |
| Sealing | Not separately recorded | Without |
| Relubrication feature | Not separately recorded | With |
| Indicative carbon footprint for new product | Not separately recorded | 5.5 kg CO 2 e |
Logistics
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Product net weight | Not separately recorded | 1.49 kg |
SKF 22213 EK — 52 recorded parameters
Spherical roller bearing with tapered bore and relubrication features
Reference: SKF product catalogue; source snapshot 2026-09-02.
SKF 22213 EK initial radial clearance: 55–75 µm (0.055–0.075 mm). The recorded clearance class is CN, bore diameter d = 65 mm, and bore taper is 1:12. These numbers belong to this full designation, not every 22213 variant.
Why this interval: SKF Spherical roller bearings, publication 18406 EN, Table 5 (printed page 13), places this tapered bore in 50 < d ≤ 65 mm. The exact product record and the table agree. A bore exactly at the upper boundary stays in this row; the cylindrical-bore table is not interchangeable with it.
Read this as clearance before installation, with no measuring load applied. It is not a required residual gap after driving the bearing up its taper, a shaft fit tolerance, an axial endplay value, or an operating-clearance target.
For mounting, use the procedure for the complete bearing and shaft or sleeve arrangement. Initial clearance alone cannot determine a locknut angle or drive-up distance. Fits and ring temperatures can change the remaining clearance; do not set the assembly to the unmounted maximum.
Keep total assembly width distinct from inner- and outer-ring widths. The same nominal bore does not establish a matching cup/cone set.
Values shown are retained from the recorded source. Zero boundary dimensions and zero load ratings from incomplete legacy feeds are withheld rather than presented as usable specifications.
Dimensions
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | Not separately recorded | 65.0 mm |
| Outside diameter | Not separately recorded | 120.0 mm |
| Width | Not separately recorded | 31.0 mm |
Performance
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Basic dynamic load rating | Not separately recorded | 198.0 kN |
| Basic static load rating | Not separately recorded | 216.0 kN |
| Reference speed | Not separately recorded | 5000.0 r/min |
| Limiting speed | Not separately recorded | 7000.0 r/min |
| SKF performance class | Not separately recorded | SKF Explorer |
Properties
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Number of rows | Not separately recorded | 2 |
| Locating feature, bearing outer ring | Not separately recorded | Without |
| Bore type | Not separately recorded | Tapered 1:12 |
| Cage | Not separately recorded | Sheet metal |
| Radial internal clearance | Not separately recorded | CN |
| Tolerance class for dimensions | Not separately recorded | Normal |
| Tolerance class for run-out | Not separately recorded | P5 |
| Sealing | Not separately recorded | Without |
| Relubrication feature | Not separately recorded | With |
| Indicative carbon footprint for new product | Not separately recorded | 5.5 kg CO 2 e |
Logistics
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Product net weight | Not separately recorded | 1.49 kg |
Engineering — Engineering specifications
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Bore type | Not separately recorded | Tapered 1:12 |
Engineering — Dimensions
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 65 mm |
| Deviation limits of tapered slope | t ΔSL | 0 to 0.03 mm |
| Outside diameter | D | 120 mm |
| Deviation limits of mid-range outside diameter | t ΔDmp | -0.015 to 0 mm |
| Width | B | 31 mm |
| Deviation limits of ring width | t ΔBs | -0.06 to 0 mm |
| Shoulder diameter of inner ring | d 2 | ≈ 80.1 mm |
| Shoulder/recess diameter of outer ring | D 1 | ≈ 106 mm |
| Width of lubrication groove | b | 6 mm |
| Diameter of lubrication hole | K | 3 mm |
| Chamfer dimension | r 1,2 | min. 1.5 mm |
| ISO tolerance class for dimensions | Not separately recorded | Normal |
Engineering — Abutment dimensions
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Diameter of housing abutment | D a | max. 111 mm |
| Radius of fillet | r a | max. 1.5 mm |
Engineering — Calculation data
| Parameter | Source symbol | Recorded value |
|---|---|---|
| SKF performance class | Not separately recorded | SKF Explorer |
| Basic dynamic load rating | C | 198 kN |
| Basic static load rating | C 0 | 216 kN |
| Fatigue load limit | P u | 23.6 kN |
| Reference speed | Not separately recorded | 5000 r/min |
| Limiting speed | Not separately recorded | 7000 r/min |
| Limiting value | e | 0.24 |
| Calculation factor | Y 1 | 2.8 |
| Calculation factor | Y 2 | 4.2 |
| Calculation factor | Y 0 | 2.8 |
Engineering — Tolerances of run-out
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Range of section height at inner ring of assembled bearing | t Kia | 5 µm |
| Maximum run-out of inner ring side face to the bore | t Sd | 8 µm |
| Range of section height at outer ring of assembled bearing | t Kea | 10 µm |
| Perpendicularity of outer ring outside surface | t SD | 4.5 µm |
| ISO tolerance class for geometrical tolerances | Not separately recorded | P5 |
Engineering — Radial internal clearance
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Minimum initial clearance | Not separately recorded | 55 µm |
| Maximum initial clearance | Not separately recorded | 75 µm |
Engineering — Mounting information
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Recommended tightening angle for lock nut | α | 115 ° |
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF22213/C3W33VA9A1Spherical roller bearing for low-speed applications, with relubrication features |
| 161 kN | 208 kN | — | 700 rpm | 1.5 kg1500 g |
| SKF22213 ESpherical roller bearing with relubrication features |
| 198 kN | 216 kN | 5000 rpm | 7000 rpm | 1.52 kg1520 g |
| SKF22213 E/C2Spherical roller bearing with relubrication features |
| 198 kN | 216 kN | 5000 rpm | 7000 rpm | 1.52 kg1520 g |
| SKF22213 E/C3Spherical roller bearing with relubrication features |
| 198 kN | 216 kN | 5000 rpm | 7000 rpm | 1.52 kg1520 g |
| SKF22213 E/C4Spherical roller bearing with relubrication features |
| 198 kN | 216 kN | 5000 rpm | 7000 rpm | 1.52 kg1520 g |
| SKF22213 EKSpherical roller bearing with tapered bore and relubrication features |
| 198 kN | 216 kN | 5000 rpm | 7000 rpm | 1.49 kg1490 g |
| SKF22213 EK/C3Spherical roller bearing with tapered bore and relubrication features |
| 198 kN | 216 kN | 5000 rpm | 7000 rpm | 1.49 kg1490 g |
| SKF22213 EK/C4Spherical roller bearing with tapered bore and relubrication features |
| 198 kN | 216 kN | 5000 rpm | 7000 rpm | 1.49 kg1490 g |
| SKF22213 K/C3W33VA9A1Spherical roller bearing for low-speed applications, with tapered bore and relubrication features |
| 161 kN | 208 kN | — | 700 rpm | 1.45 kg1450 g |
| SKF22213 K/W33VA9A1Spherical roller bearing for low-speed applications, with tapered bore and relubrication features |
| 161 kN | 208 kN | — | 700 rpm | 1.45 kg1450 g |
| SKF22213/W33VA9A1Spherical roller bearing for low-speed applications, with relubrication features |
| 161 kN | 208 kN | — | 700 rpm | 1.5 kg1500 g |
| FAG22213-E1A-XL-K-MSpherical Roller Bearing |
| 202 kN | 210 kN | 4200 rpm | 7000 rpm | 1.477 kg1477 g |
| FAG22213-E1A-XL-K-M-C3Spherical Roller Bearing |
| 202 kN | 210 kN | 4200 rpm | 7000 rpm | 1.5 kg1500 g |
| FAG22213-E1A-XL-K-M-C4Spherical Roller Bearing |
| 202 kN | 210 kN | 4200 rpm | 7000 rpm | 1.5 kg1500 g |
| FAG22213-E1A-XL-MSpherical Roller Bearing |
| 202 kN | 210 kN | 4200 rpm | 7000 rpm | 1.501 kg1501 g |
| FAG22213-E1A-XL-M-C3Spherical Roller Bearing |
| 202 kN | 210 kN | 4200 rpm | 7000 rpm | 1.501 kg1501 g |
| FAG22213-E1A-XL-M-C4Spherical Roller Bearing |
| 202 kN | 210 kN | 4200 rpm | 7000 rpm | 1.501 kg1501 g |
| FAG22213-E1-XLSpherical Roller Bearing |
| 202 kN | 210 kN | 4200 rpm | 7000 rpm | 1.476 kg1476 g |
| FAG22213-E1-XL-C2Spherical Roller Bearing |
| 202 kN | 210 kN | 4200 rpm | 7000 rpm | 1.476 kg1476 g |
| FAG22213-E1-XL-C3Spherical Roller Bearing |
| 202 kN | 210 kN | 4200 rpm | 7000 rpm | 1.476 kg1476 g |
| FAG22213-E1-XL-C4Spherical Roller Bearing |
| 202 kN | 210 kN | 4200 rpm | 7000 rpm | 1.476 kg1476 g |
| FAG22213-E1-XL-KSpherical Roller Bearing |
| 202 kN | 210 kN | 4200 rpm | 7000 rpm | 1.476 kg1476 g |
| FAG22213-E1-XL-K-C3Spherical Roller Bearing |
| 202 kN | 210 kN | 4200 rpm | 7000 rpm | 1.476 kg1476 g |
| FAG22213-E1-XL-K-C4Spherical Roller Bearing |
| 202 kN | 210 kN | 4200 rpm | 7000 rpm | 1.476 kg1476 g |
| TIMKEN22213EJW33Spherical roller bearing |
| 206 kN | 216 kN | — | — | 1.51 kg1510 g |
| TIMKEN22213EJW33C2Spherical roller bearing |
| 206 kN | 216 kN | — | — | 1.51 kg1510 g |
| TIMKEN22213EJW33C3Spherical roller bearing |
| 206 kN | 216 kN | — | — | 1.51 kg1510 g |
| TIMKEN22213EJW33C4Spherical roller bearing |
| 206 kN | 216 kN | — | — | 1.51 kg1510 g |
| TIMKEN22213EJW33C5Spherical roller bearing |
| 206 kN | 216 kN | — | — | 1.51 kg1510 g |
| TIMKEN22213EJW33S3C4Spherical roller bearing |
| 206 kN | 216 kN | — | — | 1.51 kg1510 g |
| TIMKEN22213EJW841Spherical roller bearing |
| 206 kN | 216 kN | — | — | 1.53 kg1530 g |
| TIMKEN22213EJW841C4Spherical roller bearing |
| 206 kN | 216 kN | — | — | 1.53 kg1530 g |
| TIMKEN22213EMC3Spherical roller bearing |
| 198 kN | 204 kN | — | — | 1.5 kg1500 g |
| TIMKEN22213EMW33Spherical roller bearing |
| 198 kN | 204 kN | — | — | 1.5 kg1500 g |
| TIMKEN22213EMW33C3Spherical roller bearing |
| 198 kN | 204 kN | — | — | 1.5 kg1500 g |
| TIMKEN22213KEJW33Spherical roller bearing |
| 206 kN | 216 kN | — | — | 1.48 kg1480 g |
| TIMKEN22213KEJW33C3Spherical roller bearing |
| 206 kN | 216 kN | — | — | 1.48 kg1480 g |
| TIMKEN22213KEJW33C4Spherical roller bearing |
| 206 kN | 216 kN | — | — | 1.48 kg1480 g |
| TIMKEN22213KEJW841C3SLASpherical roller bearing |
| 206 kN | 216 kN | — | — | 1.53 kg1530 g |
| TIMKEN22213KEMW33Spherical roller bearing |
| 198 kN | 204 kN | — | — | 1.47 kg1470 g |
| TIMKEN22213KEMW33C3Spherical roller bearing |
| 198 kN | 204 kN | — | — | 1.47 kg1470 g |
| NSK22213EAE4Spherical roller bearing |
| 221 kN | 230 kN | — | — | 1.51 kg1510 g |
| NSK22213EAKE4Spherical roller bearing |
| 221 kN | 230 kN | — | — | — |
| KOYO22213RZSpherical roller bearing |
| 222 kN | 211 kN | — | 4000 rpmLimiting Speeds(Grease Lub.): 4000 min-1Limiting Speeds(Oil Lub.): 5200 min-1 | 1.55 kg1550 g |
| KOYO22213RZK+AH313Spherical roller bearing |
| 222 kN | 211 kN | — | 4000 rpmLimiting Speeds(Grease Lub.): 4000 min-1Limiting Speeds(Oil Lub.): 5200 min-1 | 1.77 kg1770 g |
| KOYO22213RZK+H313XSpherical roller bearing |
| 222 kN | 211 kN | — | 4000 rpmLimiting Speeds(Grease Lub.): 4000 min-1Limiting Speeds(Oil Lub.): 5200 min-1 | 2.01 kg2010 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 22213/C3W33VA9A1 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 22213 E | Without | Normal | CN | Sheet metal | Not recorded | None |
| SKF 22213 E/C2 | Without | Not recorded | C2 | Sheet metal | Not recorded | None |
| SKF 22213 E/C3 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 22213 E/C4 | Without | Not recorded | C4 | Sheet metal | Not recorded | None |
| SKF 22213 EK | Without | Normal | CN | Sheet metal | Not recorded | None |
| SKF 22213 EK/C3 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 22213 EK/C4 | Without | Not recorded | C4 | Sheet metal | Not recorded | None |
| SKF 22213 K/C3W33VA9A1 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 22213 K/W33VA9A1 | Without | Not recorded | CN | Sheet metal | Not recorded | None |
| SKF 22213/W33VA9A1 | Without | Not recorded | CN | Sheet metal | Not recorded | None |
| FAG 22213-E1A-XL-K-M | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | M — Brass Cage | Not recorded | Not recorded |
| FAG 22213-E1A-XL-K-M-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | M — Brass Cage | Not recorded | Not recorded |
| FAG 22213-E1A-XL-K-M-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | M — Brass Cage | Not recorded | Not recorded |
| FAG 22213-E1A-XL-M | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | M — Brass Cage | Not recorded | Not recorded |
| FAG 22213-E1A-XL-M-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | M — Brass Cage | Not recorded | Not recorded |
| FAG 22213-E1A-XL-M-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | M — Brass Cage | Not recorded | Not recorded |
| FAG 22213-E1-XL | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | JPA — Sheet metal cage | Not recorded | Not recorded |
| FAG 22213-E1-XL-C2 | Not recorded | Not recorded | C2 (Group 2) — Internal clearance smaller than CN | JPA — Sheet metal cage | Not recorded | Not recorded |
| FAG 22213-E1-XL-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | JPA — Sheet metal cage | Not recorded | Not recorded |
| FAG 22213-E1-XL-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | JPA — Sheet metal cage | Not recorded | Not recorded |
| FAG 22213-E1-XL-K | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | JPA — Sheet metal cage | Not recorded | Not recorded |
| FAG 22213-E1-XL-K-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | JPA — Sheet metal cage | Not recorded | Not recorded |
| FAG 22213-E1-XL-K-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | JPA — Sheet metal cage | Not recorded | Not recorded |
| TIMKEN 22213EJW33 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22213EJW33C2 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22213EJW33C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22213EJW33C4 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22213EJW33C5 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22213EJW33S3C4 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22213EJW841 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22213EJW841C4 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22213EMC3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22213EMW33 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22213EMW33C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22213KEJW33 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22213KEJW33C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22213KEJW33C4 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22213KEJW841C3SLA | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22213KEMW33 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22213KEMW33C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| NSK 22213EAE4 | Not recorded | Not recorded | CN | Pressed steel | Not recorded | Not recorded |
| NSK 22213EAKE4 | Not recorded | Not recorded | CN | Pressed steel | Not recorded | Not recorded |
| KOYO 22213RZ | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 22213RZK+AH313 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 22213RZK+H313X | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
22213/C3W33VA9A1
Spherical roller bearing for low-speed applications, with relubrication features
View full technical record →SKF22213 E
Spherical roller bearing with relubrication features
View full technical record →FAG22213-E1A-XL-K-M
Spherical Roller Bearing
View full technical record →FAG22213-E1A-XL-K-M-C3
Spherical Roller Bearing
View full technical record →FAG22213-E1A-XL-K-M-C4
Spherical Roller Bearing
View full technical record →FAG22213-E1A-XL-M
Spherical Roller Bearing
View full technical record →FAG22213-E1A-XL-M-C3
Spherical Roller Bearing
View full technical record →FAG22213-E1A-XL-M-C4
Spherical Roller Bearing
View full technical record →FAG22213-E1-XL
Spherical Roller Bearing
View full technical record →FAG22213-E1-XL-C2
Spherical Roller Bearing
View full technical record →FAG22213-E1-XL-C3
Spherical Roller Bearing
View full technical record →FAG22213-E1-XL-C4
Spherical Roller Bearing
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.