22211 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 22211. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
22211 dimensions and recorded technical data
Use the named dimensions for each complete record below. A generic d×D×B answer is not asserted where the base record is missing, dimension symbols are unverified, or the product uses a different geometry such as a housing or thrust assembly. Suffix records are not substituted for a missing base specification.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 41 recorded variants are listed. A dash means the value is missing, not zero.
Read the original dimensions for 22211
Boundary size alone does not describe every ring, shoulder or assembled unit. These tables retain the recorded manufacturer labels, symbols, units and limits for each complete marking. Expand a record to check its detailed measurements.
Important: an approximate value, a minimum or a maximum keeps that qualifier. These reference extracts are not CAD drawings, fit recommendations or replacement approvals.
SKF 22211 EK/C3 — 3 dimension fields
Spherical roller bearing with tapered bore and relubrication features. Source: SKF product catalogue; recorded snapshot 2026-09-02.
The source gives named dimensions but no drawing symbol for some values. An unqualified width is not relabelled as inner-ring B or assembly T.
For a tapered bearing, total assembly width T, inner-ring width B and outer-ring width C are different measurements. Keep the complete cup/cone or matched assembly designation; do not replace T with B when checking available axial space.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | Not supplied separately | 55.0 mm |
| Outside diameter | Not supplied separately | 100.0 mm |
| Width | Not supplied separately | 25.0 mm |
Catalogue parameters for 22211
Choose the complete brand and marking before reading a value. These source-labelled records add dimensions, construction and engineering properties where they were recorded; a shared model number does not establish interchangeability.
Units, ranges and minimum/maximum qualifiers are retained. The data is a dated catalogue reference, not a certified drawing, a complete current specification or an operating approval.
SKF 22211 EK/C3 — 19 recorded parameters
Spherical roller bearing with tapered bore and relubrication features
Reference: SKF product catalogue; source snapshot 2026-09-02.
SKF 22211 EK/C3 has a nominal bearing envelope of 55×100×25 mm, in bore × outside diameter × width order. This answer belongs to the complete EK/C3 marking, not to every bearing sharing its base number.
Calculated inch reference (bore × outside diameter × width): 2.165354 × 3.937008 × 0.984252 in. This converts the recorded millimetres using exactly 25.4 mm/in and rounds to six decimals; it does not change the nominal series or supply machining tolerances.
The recorded construction has a tapered bore. These boundary dimensions do not identify the cylindrical shaft diameter, adapter sleeve, drive-up distance or final mounted clearance; those require the mounting arrangement and applicable source instructions.
Keep total assembly width distinct from inner- and outer-ring widths. The same nominal bore does not establish a matching cup/cone set.
Values shown are retained from the recorded source. Zero boundary dimensions and zero load ratings from incomplete legacy feeds are withheld rather than presented as usable specifications.
Dimensions
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | Not separately recorded | 55.0 mm |
| Outside diameter | Not separately recorded | 100.0 mm |
| Width | Not separately recorded | 25.0 mm |
Performance
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Basic dynamic load rating | Not separately recorded | 129.0 kN |
| Basic static load rating | Not separately recorded | 127.0 kN |
| Reference speed | Not separately recorded | 6300.0 r/min |
| Limiting speed | Not separately recorded | 8500.0 r/min |
| SKF performance class | Not separately recorded | SKF Explorer |
Properties
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Number of rows | Not separately recorded | 2 |
| Locating feature, bearing outer ring | Not separately recorded | Without |
| Bore type | Not separately recorded | Tapered 1:12 |
| Cage | Not separately recorded | Sheet metal |
| Radial internal clearance | Not separately recorded | C3 |
| Tolerance class for dimensions | Not separately recorded | Normal |
| Tolerance class for run-out | Not separately recorded | P5 |
| Sealing | Not separately recorded | Without |
| Relubrication feature | Not separately recorded | With |
| Indicative carbon footprint for new product | Not separately recorded | 3.0 kg CO 2 e |
Logistics
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Product net weight | Not separately recorded | 0.801 kg |
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF22211/C3W33VA9A1Spherical roller bearing for low-speed applications, with relubrication features |
| 104 kN | 122 kN | — | 850 rpm | 0.79 kg790 g |
| SKF22211 ESpherical roller bearing with relubrication features |
| 129 kN | 127 kN | 6300 rpm | 8500 rpm | 0.816 kg816 g |
| SKF22211 E/C3Spherical roller bearing with relubrication features |
| 129 kN | 127 kN | 6300 rpm | 8500 rpm | 0.816 kg816 g |
| SKF22211 E/C4Spherical roller bearing with relubrication features |
| 129 kN | 127 kN | 6300 rpm | 8500 rpm | 0.816 kg816 g |
| SKF22211 EKSpherical roller bearing with tapered bore and relubrication features |
| 129 kN | 127 kN | 6300 rpm | 8500 rpm | 0.801 kg801 g |
| SKF22211 EK/C3Spherical roller bearing with tapered bore and relubrication features |
| 129 kN | 127 kN | 6300 rpm | 8500 rpm | 0.801 kg801 g |
| SKF22211 EK/C4Spherical roller bearing with tapered bore and relubrication features |
| 129 kN | 127 kN | 6300 rpm | 8500 rpm | 0.801 kg801 g |
| SKF22211 EK/VA751Spherical roller bearing with tapered bore and relubrication features |
| 129 kN | 127 kN | 6300 rpm | 8500 rpm | 0.82 kg820 g |
| SKF22211 EW/C3VQ335Spherical roller bearing |
| 129 kN | 127 kN | 6300 rpm | 8500 rpm | 0.82 kg820 g |
| SKF22211 K/C3W33VA9A1Spherical roller bearing for low-speed applications, with tapered bore and relubrication features |
| 104 kN | 122 kN | — | 850 rpm | 0.78 kg780 g |
| SKF22211 K/W33VA9A1Spherical roller bearing for low-speed applications, with tapered bore and relubrication features |
| 104 kN | 122 kN | — | 850 rpm | 0.78 kg780 g |
| SKF22211/W33VA9A1Spherical roller bearing for low-speed applications, with relubrication features |
| 104 kN | 122 kN | — | 850 rpm | 0.79 kg790 g |
| FAG22211-E1-XLSpherical Roller Bearing |
| 129 kN | 130 kN | 4650 rpm | 9000 rpm | 0.838 kg838 g |
| FAG22211-E1-XL-C2Spherical Roller Bearing |
| 129 kN | 130 kN | 4650 rpm | 9000 rpm | 0.519 kg519 g |
| FAG22211-E1-XL-C3Spherical Roller Bearing |
| 129 kN | 130 kN | 4650 rpm | 9000 rpm | 0.838 kg838 g |
| FAG22211-E1-XL-C4Spherical Roller Bearing |
| 129 kN | 130 kN | 4650 rpm | 9000 rpm | 0.519 kg519 g |
| FAG22211-E1-XL-KSpherical Roller Bearing |
| 129 kN | 130 kN | 4650 rpm | 9000 rpm | 0.805 kg805 g |
| FAG22211-E1-XL-K-C2Spherical Roller Bearing |
| 129 kN | 130 kN | 4650 rpm | 9000 rpm | 0.805 kg805 g |
| FAG22211-E1-XL-K-C3Spherical Roller Bearing |
| 129 kN | 130 kN | 4650 rpm | 9000 rpm | 0.805 kg805 g |
| FAG22211-E1-XL-K-C4Spherical Roller Bearing |
| 129 kN | 130 kN | 4650 rpm | 9000 rpm | 0.8 kg800 g |
| TIMKEN22211EJW33Spherical roller bearing |
| 140 kN | 142 kN | — | — | 0.82 kg820 g |
| TIMKEN22211EJW33C2Spherical roller bearing |
| 140 kN | 142 kN | — | — | 0.82 kg820 g |
| TIMKEN22211EJW33C3Spherical roller bearing |
| 140 kN | 142 kN | — | — | 0.82 kg820 g |
| TIMKEN22211EJW33C3SLASpherical roller bearing |
| 140 kN | 142 kN | — | — | 0.83 kg830 g |
| TIMKEN22211EJW33C4Spherical roller bearing |
| 140 kN | 142 kN | — | — | 0.82 kg820 g |
| TIMKEN22211EJW33S3Spherical roller bearing |
| 140 kN | 142 kN | — | — | 0.81 kg810 g |
| TIMKEN22211EJW33W8Spherical roller bearing |
| 140 kN | 142 kN | — | — | 0.81 kg810 g |
| TIMKEN22211EJW841Spherical roller bearing |
| 140 kN | 142 kN | — | — | 0.83 kg830 g |
| TIMKEN22211EJW841C3Spherical roller bearing |
| 140 kN | 142 kN | — | — | 0.83 kg830 g |
| TIMKEN22211EMC3Spherical roller bearing |
| 134 kN | 134 kN | — | — | 0.82 kg820 g |
| TIMKEN22211EMW33C3Spherical roller bearing |
| 134 kN | 134 kN | — | — | 0.81 kg810 g |
| TIMKEN22211KEJW33Spherical roller bearing |
| 140 kN | 142 kN | — | — | 0.8 kg800 g |
| TIMKEN22211KEJW33C3Spherical roller bearing |
| 140 kN | 142 kN | — | — | 0.8 kg800 g |
| TIMKEN22211KEJW33C4Spherical roller bearing |
| 140 kN | 142 kN | — | — | 0.8 kg800 g |
| TIMKEN22211KEJW841C3SLASpherical roller bearing |
| 140 kN | 142 kN | — | — | 0.83 kg830 g |
| TIMKEN22211KEMW33C3Spherical roller bearing |
| 134 kN | 134 kN | — | — | 0.79 kg790 g |
| NSK22211EAE4Spherical roller bearing |
| 149 kN | 144 kN | — | — | 0.81 kg810 g |
| NSK22211EAKE4Spherical roller bearing |
| 149 kN | 144 kN | — | — | — |
| KOYO22211RZSpherical roller bearing |
| 154 kN | 144 kN | — | 4700 rpmLimiting Speeds(Grease Lub.): 4700 min-1Limiting Speeds(Oil Lub.): 6300 min-1 | 0.867 kg867 g |
| KOYO22211RZK+AHX311Spherical roller bearing |
| 154 kN | 144 kN | — | 4700 rpmLimiting Speeds(Grease Lub.): 4700 min-1Limiting Speeds(Oil Lub.): 6300 min-1 | 1.01 kg1010 g |
| KOYO22211RZK+H311XSpherical roller bearing |
| 154 kN | 144 kN | — | 4700 rpmLimiting Speeds(Grease Lub.): 4700 min-1Limiting Speeds(Oil Lub.): 6300 min-1 | 1.22 kg1220 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 22211/C3W33VA9A1 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 22211 E | Without | Normal | CN | Sheet metal | Not recorded | None |
| SKF 22211 E/C3 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 22211 E/C4 | Without | Not recorded | C4 | Sheet metal | Not recorded | None |
| SKF 22211 EK | Without | Normal | CN | Sheet metal | Not recorded | None |
| SKF 22211 EK/C3 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 22211 EK/C4 | Without | Not recorded | C4 | Sheet metal | Not recorded | None |
| SKF 22211 EK/VA751 | Without | Not recorded | Special | Sheet metal | Not recorded | None |
| SKF 22211 EW/C3VQ335 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 22211 K/C3W33VA9A1 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 22211 K/W33VA9A1 | Without | Not recorded | CN | Sheet metal | Not recorded | None |
| SKF 22211/W33VA9A1 | Without | Not recorded | CN | Sheet metal | Not recorded | None |
| FAG 22211-E1-XL | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | JPA — Sheet metal cage | Not recorded | Not recorded |
| FAG 22211-E1-XL-C2 | Not recorded | Not recorded | C2 (Group 2) — Internal clearance smaller than CN | JPA — Sheet metal cage | Not recorded | Not recorded |
| FAG 22211-E1-XL-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | JPA — Sheet metal cage | Not recorded | Not recorded |
| FAG 22211-E1-XL-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | JPA — Sheet metal cage | Not recorded | Not recorded |
| FAG 22211-E1-XL-K | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | JPA — Sheet metal cage | Not recorded | Not recorded |
| FAG 22211-E1-XL-K-C2 | Not recorded | Not recorded | C2 (Group 2) — Internal clearance smaller than CN | JPA — Sheet metal cage | Not recorded | Not recorded |
| FAG 22211-E1-XL-K-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | JPA — Sheet metal cage | Not recorded | Not recorded |
| FAG 22211-E1-XL-K-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | JPA — Sheet metal cage | Not recorded | Not recorded |
| TIMKEN 22211EJW33 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22211EJW33C2 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22211EJW33C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22211EJW33C3SLA | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22211EJW33C4 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22211EJW33S3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22211EJW33W8 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22211EJW841 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22211EJW841C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22211EMC3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22211EMW33C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22211KEJW33 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22211KEJW33C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22211KEJW33C4 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22211KEJW841C3SLA | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22211KEMW33C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| NSK 22211EAE4 | Not recorded | Not recorded | CN | Pressed steel | Not recorded | Not recorded |
| NSK 22211EAKE4 | Not recorded | Not recorded | CN | Pressed steel | Not recorded | Not recorded |
| KOYO 22211RZ | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 22211RZK+AHX311 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 22211RZK+H311X | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
22211/C3W33VA9A1
Spherical roller bearing for low-speed applications, with relubrication features
View full technical record →SKF22211 E
Spherical roller bearing with relubrication features
View full technical record →FAG22211-E1-XL
Spherical Roller Bearing
View full technical record →FAG22211-E1-XL-C2
Spherical Roller Bearing
View full technical record →FAG22211-E1-XL-C3
Spherical Roller Bearing
View full technical record →FAG22211-E1-XL-C4
Spherical Roller Bearing
View full technical record →FAG22211-E1-XL-K
Spherical Roller Bearing
View full technical record →FAG22211-E1-XL-K-C2
Spherical Roller Bearing
View full technical record →FAG22211-E1-XL-K-C3
Spherical Roller Bearing
View full technical record →FAG22211-E1-XL-K-C4
Spherical Roller Bearing
View full technical record →NSK22211EAE4
Spherical roller bearing
View full technical record →NSK22211EAKE4
Spherical roller bearing
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.