Find · understand · compare
22207 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 22207. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
22207 dimensions and recorded technical data
Use the named dimensions for each complete record below. A generic d×D×B answer is not asserted where the base record is missing, dimension symbols are unverified, or the product uses a different geometry such as a housing or thrust assembly. Suffix records are not substituted for a missing base specification.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 32 recorded variants are listed. A dash means the value is missing, not zero.
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF22207/C3W33VA9A1Spherical roller bearing for low-speed applications, with relubrication features |
| 75.3 kN | 86.5 kN | — | 1200 rpm | 0.43 kg430 g |
| SKF22207 ESpherical roller bearing with relubrication features |
| 88.8 kN | 83 kN | 9000 rpm | 12000 rpm | 0.438 kg438 g |
| SKF22207 E/C2Spherical roller bearing with relubrication features |
| 88.8 kN | 83 kN | 9000 rpm | 12000 rpm | 0.438 kg438 g |
| SKF22207 E/C3Spherical roller bearing with relubrication features |
| 88.8 kN | 83 kN | 9000 rpm | 12000 rpm | 0.438 kg438 g |
| SKF22207 E/C3VQ335Spherical roller bearing with relubrication features |
| 88.8 kN | 83 kN | 9000 rpm | 12000 rpm | 0.439 kg439 g |
| SKF22207 E/C4Spherical roller bearing with relubrication features |
| 88.8 kN | 83 kN | 9000 rpm | 12000 rpm | 0.438 kg438 g |
| SKF22207 EKSpherical roller bearing with tapered bore and relubrication features |
| 88.8 kN | 83 kN | 9000 rpm | 12000 rpm | 0.43 kg430 g |
| SKF22207 EK/C3Spherical roller bearing with tapered bore and relubrication features |
| 88.8 kN | 83 kN | 9000 rpm | 12000 rpm | 0.43 kg430 g |
| SKF22207 K/C3W33VA9A1Spherical roller bearing for low-speed applications, with tapered bore and relubrication features |
| 75.3 kN | 86.5 kN | — | 1200 rpm | 0.42 kg420 g |
| SKF22207 K/W33VA9A1Spherical roller bearing for low-speed applications, with tapered bore and relubrication features |
| 75.3 kN | 86.5 kN | — | 1200 rpm | 0.42 kg420 g |
| SKF22207/W33VA9A1Spherical roller bearing for low-speed applications, with relubrication features |
| 75.3 kN | 86.5 kN | — | 1200 rpm | 0.43 kg430 g |
| FAG22207-E1-XLSpherical Roller Bearing |
| 89 kN | 81 kN | 7000 rpm | 10700 rpm | 0.423 kg423 g |
| FAG22207-E1-XL-C3Spherical Roller Bearing |
| 89 kN | 81 kN | 7000 rpm | 10700 rpm | 0.423 kg423 g |
| FAG22207-E1-XL-C4Spherical Roller Bearing |
| 89 kN | 81 kN | 7000 rpm | 10700 rpm | 0.423 kg423 g |
| FAG22207-E1-XL-C5Spherical Roller Bearing |
| 89 kN | 81 kN | 7000 rpm | 10700 rpm | 0.423 kg423 g |
| FAG22207-E1-XL-H40Spherical Roller Bearing |
| 89 kN | 81 kN | 7000 rpm | 10700 rpm | 0.431 kg431 g |
| FAG22207-E1-XL-KSpherical Roller Bearing |
| 89 kN | 81 kN | 7000 rpm | 10700 rpm | 0.414 kg414 g |
| FAG22207-E1-XL-K-C3Spherical Roller Bearing |
| 89 kN | 81 kN | 7000 rpm | 10700 rpm | 0.439 kg439 g |
| TIMKEN22207EJW33Spherical roller bearing |
| 90.5 kN | 87.7 kN | — | — | 0.44 kg440 g |
| TIMKEN22207EJW33C2Spherical roller bearing |
| 90.5 kN | 87.7 kN | — | — | 0.44 kg440 g |
| TIMKEN22207EJW33C3Spherical roller bearing |
| 90.5 kN | 87.7 kN | — | — | 0.44 kg440 g |
| TIMKEN22207EJW33C4Spherical roller bearing |
| 90.5 kN | 87.7 kN | — | — | 0.44 kg440 g |
| TIMKEN22207EJW33C5Spherical roller bearing |
| 90.5 kN | 87.7 kN | — | — | 0.44 kg440 g |
| TIMKEN22207EJW841Spherical roller bearing |
| 90.5 kN | 87.7 kN | — | — | 0.44 kg440 g |
| TIMKEN22207EMW33Spherical roller bearing |
| 87.3 kN | 82.2 kN | — | — | 0.44 kg440 g |
| TIMKEN22207EMW33C3Spherical roller bearing |
| 87.3 kN | 82.2 kN | — | — | 0.44 kg440 g |
| TIMKEN22207KEJW33Spherical roller bearing |
| 90.5 kN | 87.7 kN | — | — | 0.43 kg430 g |
| TIMKEN22207KEJW33C3Spherical roller bearing |
| 90.5 kN | 87.7 kN | — | — | 0.43 kg430 g |
| NSK22207CE4Spherical roller bearing |
| 69 kN | 71 kN | — | — | 0.42 kg420 g |
| NSK22207CKE4Spherical roller bearing |
| 69 kN | 71 kN | — | — | — |
| KOYO22207RZSpherical roller bearing |
| 100 kN | 88.7 kN | — | 6900 rpmLimiting Speeds(Grease Lub.): 6900 min-1Limiting Speeds(Oil Lub.): 9200 min-1 | 0.459 kg459 g |
| KOYO22207RZK+H307XSpherical roller bearing |
| 100 kN | 88.7 kN | — | 6900 rpmLimiting Speeds(Grease Lub.): 6900 min-1Limiting Speeds(Oil Lub.): 9200 min-1 | 0.61 kg610 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 22207/C3W33VA9A1 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 22207 E | Without | Normal | CN | Sheet metal | Not recorded | None |
| SKF 22207 E/C2 | Without | Not recorded | C2 | Sheet metal | Not recorded | None |
| SKF 22207 E/C3 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 22207 E/C3VQ335 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 22207 E/C4 | Without | Not recorded | C4 | Sheet metal | Not recorded | None |
| SKF 22207 EK | Without | Normal | CN | Sheet metal | Not recorded | None |
| SKF 22207 EK/C3 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 22207 K/C3W33VA9A1 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 22207 K/W33VA9A1 | Without | Not recorded | CN | Sheet metal | Not recorded | None |
| SKF 22207/W33VA9A1 | Without | Not recorded | CN | Sheet metal | Not recorded | None |
| FAG 22207-E1-XL | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | JPA — Sheet metal cage | Not recorded | Not recorded |
| FAG 22207-E1-XL-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | JPA — Sheet metal cage | Not recorded | Not recorded |
| FAG 22207-E1-XL-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | JPA — Sheet metal cage | Not recorded | Not recorded |
| FAG 22207-E1-XL-C5 | Not recorded | Not recorded | Not recorded | JPA — Sheet metal cage | Not recorded | Not recorded |
| FAG 22207-E1-XL-H40 | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | JPA — Sheet metal cage | Not recorded | Not recorded |
| FAG 22207-E1-XL-K | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | JPA — Sheet metal cage | Not recorded | Not recorded |
| FAG 22207-E1-XL-K-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | JPA — Sheet metal cage | Not recorded | Not recorded |
| TIMKEN 22207EJW33 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22207EJW33C2 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22207EJW33C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22207EJW33C4 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22207EJW33C5 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22207EJW841 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22207EMW33 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22207EMW33C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 22207KEJW33 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 22207KEJW33C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| NSK 22207CE4 | Not recorded | Not recorded | CN | Pressed steel | Not recorded | Not recorded |
| NSK 22207CKE4 | Not recorded | Not recorded | CN | Pressed steel | Not recorded | Not recorded |
| KOYO 22207RZ | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 22207RZK+H307X | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
SKF
22207/C3W33VA9A1
Spherical roller bearing for low-speed applications, with relubrication features
View full technical record →NSK22207CE4
Spherical roller bearing
View full technical record →NSK22207CKE4
Spherical roller bearing
View full technical record →SKF22207 E
Spherical roller bearing with relubrication features
View full technical record →FAG22207-E1-XL
Spherical Roller Bearing
View full technical record →FAG22207-E1-XL-C3
Spherical Roller Bearing
View full technical record →FAG22207-E1-XL-C4
Spherical Roller Bearing
View full technical record →FAG22207-E1-XL-C5
Spherical Roller Bearing
View full technical record →FAG22207-E1-XL-H40
Spherical Roller Bearing
View full technical record →FAG22207-E1-XL-K
Spherical Roller Bearing
View full technical record →FAG22207-E1-XL-K-C3
Spherical Roller Bearing
View full technical record →SKF22207 E/C2
Spherical roller bearing with relubrication features
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.