99,016 bearing records · search, filter and compare

info@bearingscope.com
Find · understand · compare

2206 bearing dimensions & suffix variants

Look up recorded dimensions for designations beginning with 2206. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.

On this page5 sections

Find by measured dimensions

Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.

For tapered assemblies use total width T; for units or flanged bearings also check the mounting drawing.

Exact model evidence

2206 dimensions and recorded technical data

The recorded 2206 base designation measures 30×62×20 mm (inside diameter d × outside diameter D × width B). This answer uses unsuffixed records from NSK, KOYO. It does not assign the same dimensions or operating ratings to every suffix.

The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 21 recorded variants are listed. A dash means the value is missing, not zero.

Brand / full designationNamed dimensions (mm / in)Dynamic C (kN)Static C0 (kN)Reference speed (rpm)Limiting speed (rpm)Mass (kg / g)
NSK2206Self-aligning ball bearing
Bore diameter (d)
30 mm
1.181102 in
Outside diameter (D)
62 mm
2.440945 in
Bearing width (B)
20 mm
0.787402 in
16.8 kN4.55 kN——0.262 kg262 g
KOYO2206Self-aligning ball bearing
Bore diameter (d)
30 mm
1.181102 in
Outside diameter (D)
62 mm
2.440945 in
Width (B)
20 mm
0.787402 in
19.3 kN4.65 kN—10000 rpmLimiting Speeds(Grease Lub.): 10000 min-1Limiting Speeds(Oil Lub.): 12000 min-10.26 kg260 g
SKF2206 E-2RS1KTN9Self-aligning ball bearing with tapered bore and seals on both sides
Bore diameter (d)
30 mm
1.181102 in
Outside diameter (D)
62 mm
2.440945 in
Width (B)
20 mm
0.787402 in
15.6 kN4.65 kN22000 rpm7500 rpm0.251 kg251 g
SKF2206 E-2RS1KTN9/C3Self-aligning ball bearing with tapered bore and seals on both sides
Recorded bore (d)
30 mm
1.181102 in
Recorded outside dimension (D)
62 mm
2.440945 in
Catalogue width (symbol unverified)
20 mm
0.787402 in
15.6 kN4.65 kN22000 rpm7500 rpm0.251 kg251 g
SKF2206 E-2RS1TN9Self-aligning ball bearing with seals on both sides
Bore diameter (d)
30 mm
1.181102 in
Outside diameter (D)
62 mm
2.440945 in
Width (B)
20 mm
0.787402 in
15.6 kN4.65 kN22000 rpm7500 rpm0.26 kg260 g
SKF2206 E-2RS1TN9/C3Self-aligning ball bearing with seals on both sides
Recorded bore (d)
30 mm
1.181102 in
Recorded outside dimension (D)
62 mm
2.440945 in
Catalogue width (symbol unverified)
20 mm
0.787402 in
15.6 kN4.65 kN22000 rpm7500 rpm0.26 kg260 g
SKF2206 EKTN9Self-aligning ball bearing with tapered bore
Bore diameter (d)
30.083 mm
1.18437 in
Outside diameter (D)
62 mm
2.440945 in
Width (B)
20 mm
0.787402 in
23.8 kN6.7 kN22000 rpm15000 rpm0.239 kg239 g
SKF2206 EKTN9/C3Self-aligning ball bearing with tapered bore
Recorded bore (d)
30.083 mm
1.18437 in
Recorded outside dimension (D)
62 mm
2.440945 in
Catalogue width (symbol unverified)
20 mm
0.787402 in
23.8 kN6.7 kN22000 rpm15000 rpm0.24 kg240 g
SKF2206 E-RS1TN9/C3Self-aligning ball bearing with seals on both sides
Recorded bore (d)
30 mm
1.181102 in
Recorded outside dimension (D)
62 mm
2.440945 in
Catalogue width (symbol unverified)
20 mm
0.787402 in
15.6 kN4.65 kN22000 rpm15000 rpm0.26 kg260 g
SKF2206 ETN9Self-aligning ball bearing
Bore diameter (d)
30 mm
1.181102 in
Outside diameter (D)
62 mm
2.440945 in
Width (B)
20 mm
0.787402 in
23.8 kN6.7 kN22000 rpm15000 rpm0.245 kg245 g
SKF2206 ETN9/C3Self-aligning ball bearing
Recorded bore (d)
30 mm
1.181102 in
Recorded outside dimension (D)
62 mm
2.440945 in
Catalogue width (symbol unverified)
20 mm
0.787402 in
23.8 kN6.7 kN22000 rpm15000 rpm0.245 kg245 g
FAG2206-2RS-TVHSelf-aligning ball bearing
Bore diameter (d)
30 mm
1.181102 in
Outside diameter (D)
62 mm
2.440945 in
Width (B)
20 mm
0.787402 in
15.9 kN4.65 kN—7100 rpm0.265 kg265 g
FAG2206-2RS-TVH>NSelf-aligning ball bearing
Bore diameter (d)
30 mm
1.181102 in
Outside diameter (D)
62 mm
2.440945 in
Width (B)
20 mm
0.787402 in
15.9 kN4.65 kN—7100 rpm0.265 kg265 g
FAG2206-K-2RS-TVH-C3Self-aligning ball bearing
Bore diameter (d)
30 mm
1.181102 in
Outside diameter (D)
62 mm
2.440945 in
Width (B)
20 mm
0.787402 in
15.9 kN4.65 kN—7100 rpm0.26 kg260 g
FAG2206-K-TVHSelf-aligning ball bearing
Bore diameter (d)
30 mm
1.181102 in
Outside diameter (D)
62 mm
2.440945 in
Width (B)
20 mm
0.787402 in
26 kN6.9 kN11400 rpm11500 rpm0.254 kg254 g
FAG2206-K-TVH-C3Self-aligning ball bearing
Bore diameter (d)
30 mm
1.181102 in
Outside diameter (D)
62 mm
2.440945 in
Width (B)
20 mm
0.787402 in
26 kN6.9 kN11400 rpm11500 rpm0.254 kg254 g
FAG2206-TVHSelf-aligning ball bearing
Bore diameter (d)
30 mm
1.181102 in
Outside diameter (D)
62 mm
2.440945 in
Width (B)
20 mm
0.787402 in
26 kN6.9 kN11400 rpm11500 rpm0.25 kg250 g
FAG2206-TVH-C3Self-aligning ball bearing
Bore diameter (d)
30 mm
1.181102 in
Outside diameter (D)
62 mm
2.440945 in
Width (B)
20 mm
0.787402 in
26 kN6.9 kN11400 rpm11500 rpm0.25 kg250 g
FAG2206-TVH-C3>NSelf-aligning ball bearing
Bore diameter (d)
30 mm
1.181102 in
Outside diameter (D)
62 mm
2.440945 in
Width (B)
20 mm
0.787402 in
26 kN6.9 kN11400 rpm11500 rpm0.25 kg250 g
FAG2206-TVH>NSelf-aligning ball bearing
Bore diameter (d)
30 mm
1.181102 in
Outside diameter (D)
62 mm
2.440945 in
Width (B)
20 mm
0.787402 in
26 kN6.9 kN11400 rpm11500 rpm0.25 kg250 g
NSK2206KSelf-aligning ball bearing
Nominal bore diameter (1:12 taper) (d)
30 mm
1.181102 in
Outside diameter (D)
62 mm
2.440945 in
Bearing width (B)
20 mm
0.787402 in
16.8 kN4.55 kN———
Compare recorded seals, clearance, precision and materials

Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.

Brand / designationClosureOriginal precisionClearanceCageMaterialLubricant
NSK 2206Not recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 2206OpenNot recordedNot recordedNot recordedNot recordedNot recorded
SKF 2206 E-2RS1KTN9Seal on both sidesNot recordedCNNon-metallicBearing steelGrease
SKF 2206 E-2RS1KTN9/C3Seal on both sidesNot recordedC3Non-metallicBearing steelGrease
SKF 2206 E-2RS1TN9Seal on both sidesNot recordedCNNon-metallicBearing steelGrease
SKF 2206 E-2RS1TN9/C3Seal on both sidesNot recordedC3Non-metallicBearing steelGrease
SKF 2206 EKTN9WithoutNot recordedCNNon-metallicBearing steelNone
SKF 2206 EKTN9/C3WithoutNot recordedC3Non-metallicBearing steelNone
SKF 2206 E-RS1TN9/C3Seal on one sideNot recordedC3Non-metallicBearing steelGrease
SKF 2206 ETN9WithoutNot recordedCNNon-metallicBearing steelNone
SKF 2206 ETN9/C3WithoutNot recordedC3Non-metallicBearing steelNone
FAG 2206-2RS-TVH2RS — Contact seal on both sidesPN — Normal (ISO 492:2023)CN (Group N) — Normal internal clearanceTVH — Solid cage made of glass-fiber reinforced polyamide PA66Not recordedGA14 — Ball bearing grease, low noise
FAG 2206-2RS-TVH>N2RS — Contact seal on both sidesPN — Normal (ISO 492:2023)CN (Group N) — Normal internal clearanceTVH — Solid cage made of glass-fiber reinforced polyamide PA66Not recordedGA14 — Ball bearing grease, low noise
FAG 2206-K-2RS-TVH-C32RS — Contact seal on both sidesPN — Normal (ISO 492:2023)C3 (Group 3) — Internal clearance larger than CNTVH — Solid cage made of glass-fiber reinforced polyamide PA66Not recordedGA14 — Ball bearing grease, low noise
FAG 2206-K-TVHWithout — Not sealedPN — Normal (ISO 492:2023)CN (Group N) — Normal internal clearanceTVH — Solid cage made of glass-fiber reinforced polyamide PA66Not recordedWithout — Bearing not greased
FAG 2206-K-TVH-C3Without — Not sealedPN — Normal (ISO 492:2023)C3 (Group 3) — Internal clearance larger than CNTVH — Solid cage made of glass-fiber reinforced polyamide PA66Not recordedWithout — Bearing not greased
FAG 2206-TVHWithout — Not sealedPN — Normal (ISO 492:2023)CN (Group N) — Normal internal clearanceTVH — Solid cage made of glass-fiber reinforced polyamide PA66Not recordedWithout — Bearing not greased
FAG 2206-TVH-C3Without — Not sealedPN — Normal (ISO 492:2023)C3 (Group 3) — Internal clearance larger than CNTVH — Solid cage made of glass-fiber reinforced polyamide PA66Not recordedWithout — Bearing not greased
FAG 2206-TVH-C3>NWithout — Not sealedPN — Normal (ISO 492:2023)C3 (Group 3) — Internal clearance larger than CNTVH — Solid cage made of glass-fiber reinforced polyamide PA66Not recordedWithout — Bearing not greased
FAG 2206-TVH>NWithout — Not sealedPN — Normal (ISO 492:2023)CN (Group N) — Normal internal clearanceTVH — Solid cage made of glass-fiber reinforced polyamide PA66Not recordedWithout — Bearing not greased
NSK 2206KNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded

How to compare these values

  • Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
  • Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
  • C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
  • Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
  • A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Check load calculations →Estimate rating life →Decode the complete marking →Check replacement evidence →

Related prefix matches — other model numbers may appear

These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.

KOYO

2206

Self-aligning ball bearing

View full technical record →NSK

2206

Self-aligning ball bearing

View full technical record →KOYO

22062RS

Self-aligning ball bearing

View full technical record →FAG

2206-2RS-TVH

Self-aligning ball bearing

View full technical record →FAG

2206-2RS-TVH>N

Self-aligning ball bearing

View full technical record →SKF

2206 E-2RS1KTN9

Self-aligning ball bearing with tapered bore and seals on both sides

View full technical record →SKF

2206 E-2RS1KTN9/C3

Self-aligning ball bearing with tapered bore and seals on both sides

View full technical record →SKF

2206 E-2RS1TN9

Self-aligning ball bearing with seals on both sides

View full technical record →SKF

2206 E-2RS1TN9/C3

Self-aligning ball bearing with seals on both sides

View full technical record →SKF

2206 EKTN9

Self-aligning ball bearing with tapered bore

View full technical record →SKF

2206 EKTN9/C3

Self-aligning ball bearing with tapered bore

View full technical record →SKF

2206 E-RS1TN9/C3

Self-aligning ball bearing with seals on both sides

View full technical record →
Filter all 22 prefix results →

Check the drawing before substituting

Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.

Measurement guide →Cross-reference checks →

Reference basis & data limits

Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.

Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.

Search the consolidated catalogue

Find, filter and compare bearing model data in one place.

Open model search