99,016 bearing records · search, filter and compare

info@bearingscope.com
Find · understand · compare

2202 bearing dimensions & suffix variants

Look up recorded dimensions for designations beginning with 2202. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.

On this page5 sections

Find by measured dimensions

Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.

For tapered assemblies use total width T; for units or flanged bearings also check the mounting drawing.

Exact model evidence

2202 dimensions and recorded technical data

The recorded 2202 base designation measures 15×35×14 mm (inside diameter d × outside diameter D × width B). This answer uses unsuffixed records from NSK, KOYO. It does not assign the same dimensions or operating ratings to every suffix.

The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 14 recorded variants are listed. A dash means the value is missing, not zero.

Brand / full designationNamed dimensions (mm / in)Dynamic C (kN)Static C0 (kN)Reference speed (rpm)Limiting speed (rpm)Mass (kg / g)
NSK2202Self-aligning ball bearing
Bore diameter (d)
15 mm
0.590551 in
Outside diameter (D)
35 mm
1.377953 in
Bearing width (B)
14 mm
0.551181 in
8.55 kN1.85 kN——0.058 kg58 g
KOYO2202Self-aligning ball bearing
Bore diameter (d)
15 mm
0.590551 in
Outside diameter (D)
35 mm
1.377953 in
Width (B)
14 mm
0.551181 in
9.6 kN1.85 kN—18000 rpmLimiting Speeds(Grease Lub.): 18000 min-1Limiting Speeds(Oil Lub.): 22000 min-10.06 kg60 g
SKF2202 E-2RS1TN9Self-aligning ball bearing with seals on both sides
Bore diameter (d)
15 mm
0.590551 in
Outside diameter (D)
35 mm
1.377953 in
Width (B)
14 mm
0.551181 in
7.41 kN1.76 kN40000 rpm14000 rpm0.0585 kg58.5 g
SKF2202 E-2RS1TN9/C3Self-aligning ball bearing with seals on both sides
Recorded bore (d)
15 mm
0.590551 in
Recorded outside dimension (D)
35 mm
1.377953 in
Catalogue width (symbol unverified)
14 mm
0.551181 in
7.41 kN1.76 kN40000 rpm14000 rpm0.06 kg60 g
SKF2202 E-2RS1TN9/W64Self-aligning ball bearing with seals on both sides
Recorded bore (d)
15 mm
0.590551 in
Recorded outside dimension (D)
35 mm
1.377953 in
Catalogue width (symbol unverified)
14 mm
0.551181 in
7.41 kN1.76 kN40000 rpm14000 rpm0.06 kg60 g
SKF2202 ETN9Self-aligning ball bearing
Bore diameter (d)
15 mm
0.590551 in
Outside diameter (D)
35 mm
1.377953 in
Width (B)
14 mm
0.551181 in
8.71 kN2.04 kN38000 rpm26000 rpm0.0536 kg53.6 g
FAG2202-2RS-TVHSelf-aligning ball bearing
Bore diameter (d)
15 mm
0.590551 in
Outside diameter (D)
35 mm
1.377953 in
Width (B)
14 mm
0.551181 in
7.7 kN1.75 kN—13700 rpm0.06 kg60 g
FAG2202-2RS-TVH-C3Self-aligning ball bearing
Bore diameter (d)
15 mm
0.590551 in
Outside diameter (D)
35 mm
1.377953 in
Width (B)
14 mm
0.551181 in
7.7 kN1.75 kN—13700 rpm0.059 kg59 g
FAG2202-2RS-TVH-C3>NSelf-aligning ball bearing
Bore diameter (d)
15 mm
0.590551 in
Outside diameter (D)
35 mm
1.377953 in
Width (B)
14 mm
0.551181 in
7.7 kN1.75 kN—13700 rpm0.059 kg59 g
FAG2202-2RS-TVH>NSelf-aligning ball bearing
Bore diameter (d)
15 mm
0.590551 in
Outside diameter (D)
35 mm
1.377953 in
Width (B)
14 mm
0.551181 in
7.7 kN1.75 kN—13700 rpm0.06 kg60 g
FAG2202-TVHSelf-aligning ball bearing
Bore diameter (d)
15 mm
0.590551 in
Outside diameter (D)
35 mm
1.377953 in
Width (B)
14 mm
0.551181 in
9.6 kN2.1 kN19600 rpm22200 rpm0.057 kg57 g
FAG2202-TVH-C3Self-aligning ball bearing
Bore diameter (d)
15 mm
0.590551 in
Outside diameter (D)
35 mm
1.377953 in
Width (B)
14 mm
0.551181 in
9.6 kN2.1 kN19600 rpm22200 rpm0.06 kg60 g
FAG2202-TVH-C3>NSelf-aligning ball bearing
Bore diameter (d)
15 mm
0.590551 in
Outside diameter (D)
35 mm
1.377953 in
Width (B)
14 mm
0.551181 in
9.6 kN2.1 kN19600 rpm22200 rpm0.06 kg60 g
FAG2202-TVH>NSelf-aligning ball bearing
Bore diameter (d)
15 mm
0.590551 in
Outside diameter (D)
35 mm
1.377953 in
Width (B)
14 mm
0.551181 in
9.6 kN2.1 kN19600 rpm22200 rpm0.06 kg60 g
Compare recorded seals, clearance, precision and materials

Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.

Brand / designationClosureOriginal precisionClearanceCageMaterialLubricant
NSK 2202Not recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 2202OpenNot recordedNot recordedNot recordedNot recordedNot recorded
SKF 2202 E-2RS1TN9Seal on both sidesNot recordedCNNon-metallicBearing steelGrease
SKF 2202 E-2RS1TN9/C3Seal on both sidesNot recordedC3Non-metallicBearing steelGrease
SKF 2202 E-2RS1TN9/W64Seal on both sidesNot recordedCNNon-metallicBearing steelSolid Oil
SKF 2202 ETN9WithoutNot recordedCNNon-metallicBearing steelNone
FAG 2202-2RS-TVH2RS — Contact seal on both sidesPN — Normal (ISO 492:2023)CN (Group N) — Normal internal clearanceTVH — Solid cage made of glass-fiber reinforced polyamide PA66Not recordedGA14 — Ball bearing grease, low noise
FAG 2202-2RS-TVH-C32RS — Contact seal on both sidesPN — Normal (ISO 492:2023)C3 (Group 3) — Internal clearance larger than CNTVH — Solid cage made of glass-fiber reinforced polyamide PA66Not recordedGA14 — Ball bearing grease, low noise
FAG 2202-2RS-TVH-C3>N2RS — Contact seal on both sidesPN — Normal (ISO 492:2023)C3 (Group 3) — Internal clearance larger than CNTVH — Solid cage made of glass-fiber reinforced polyamide PA66Not recordedGA14 — Ball bearing grease, low noise
FAG 2202-2RS-TVH>N2RS — Contact seal on both sidesPN — Normal (ISO 492:2023)CN (Group N) — Normal internal clearanceTVH — Solid cage made of glass-fiber reinforced polyamide PA66Not recordedGA14 — Ball bearing grease, low noise
FAG 2202-TVHWithout — Not sealedPN — Normal (ISO 492:2023)CN (Group N) — Normal internal clearanceTVH — Solid cage made of glass-fiber reinforced polyamide PA66Not recordedWithout — Bearing not greased
FAG 2202-TVH-C3Without — Not sealedPN — Normal (ISO 492:2023)C3 (Group 3) — Internal clearance larger than CNTVH — Solid cage made of glass-fiber reinforced polyamide PA66Not recordedWithout — Bearing not greased
FAG 2202-TVH-C3>NWithout — Not sealedPN — Normal (ISO 492:2023)C3 (Group 3) — Internal clearance larger than CNTVH — Solid cage made of glass-fiber reinforced polyamide PA66Not recordedWithout — Bearing not greased
FAG 2202-TVH>NWithout — Not sealedPN — Normal (ISO 492:2023)CN (Group N) — Normal internal clearanceTVH — Solid cage made of glass-fiber reinforced polyamide PA66Not recordedWithout — Bearing not greased

How to compare these values

  • Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
  • Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
  • C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
  • Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
  • A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Check load calculations →Estimate rating life →Decode the complete marking →Check replacement evidence →

Related prefix matches — other model numbers may appear

These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.

KOYO

2202

Self-aligning ball bearing

View full technical record →NSK

2202

Self-aligning ball bearing

View full technical record →KOYO

22022RS

Self-aligning ball bearing

View full technical record →FAG

2202-2RS-TVH

Self-aligning ball bearing

View full technical record →FAG

2202-2RS-TVH-C3

Self-aligning ball bearing

View full technical record →FAG

2202-2RS-TVH-C3>N

Self-aligning ball bearing

View full technical record →FAG

2202-2RS-TVH>N

Self-aligning ball bearing

View full technical record →SKF

2202 E-2RS1TN9

Self-aligning ball bearing with seals on both sides

View full technical record →SKF

2202 E-2RS1TN9/C3

Self-aligning ball bearing with seals on both sides

View full technical record →SKF

2202 E-2RS1TN9/W64

Self-aligning ball bearing with seals on both sides

View full technical record →SKF

2202 ETN9

Self-aligning ball bearing

View full technical record →FAG

2202-TVH

Self-aligning ball bearing

View full technical record →
Filter all 15 prefix results →

Check the drawing before substituting

Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.

Measurement guide →Cross-reference checks →

Reference basis & data limits

Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.

Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.

Search the consolidated catalogue

Find, filter and compare bearing model data in one place.

Open model search