21314 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 21314. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
21314 dimensions and recorded technical data
Use the named dimensions for each complete record below. A generic d×D×B answer is not asserted where the base record is missing, dimension symbols are unverified, or the product uses a different geometry such as a housing or thrust assembly. Suffix records are not substituted for a missing base specification.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 22 recorded variants are listed. A dash means the value is missing, not zero.
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF21314 ESpherical roller bearing with relubrication features |
| 291 kN | 325 kN | 4000 rpm | 5600 rpm | 3.13 kg3130 g |
| SKF21314 E/C3Spherical roller bearing with relubrication features |
| 291 kN | 325 kN | 4000 rpm | 5600 rpm | 3.13 kg3130 g |
| SKF21314 EKSpherical roller bearing with tapered bore and relubrication features |
| 291 kN | 325 kN | 4000 rpm | 5600 rpm | 3.08 kg3080 g |
| FAG21314-E1-XLSpherical Roller Bearing |
| 250 kN | 270 kN | 3950 rpm | 6200 rpm | 3.062 kg3062 g |
| FAG21314-E1-XL-C3Spherical Roller Bearing |
| 250 kN | 270 kN | 3950 rpm | 6200 rpm | 3.06 kg3060 g |
| FAG21314-E1-XL-C4Spherical Roller Bearing |
| 250 kN | 270 kN | 3950 rpm | 6200 rpm | 3.072 kg3072 g |
| FAG21314-E1-XL-KSpherical Roller Bearing |
| 250 kN | 270 kN | 3950 rpm | 6200 rpm | 3.024 kg3024 g |
| FAG21314-E1-XL-K-TVPBSpherical Roller Bearing |
| 250 kN | 270 kN | 3950 rpm | 6200 rpm | 2.916 kg2916 g |
| FAG21314-E1-XL-K-TVPB-C3Spherical Roller Bearing |
| 250 kN | 270 kN | 3950 rpm | 6200 rpm | 2.911 kg2911 g |
| FAG21314-E1-XL-TVPBSpherical Roller Bearing |
| 250 kN | 270 kN | 3950 rpm | 6200 rpm | 2.95 kg2950 g |
| FAG21314-E1-XL-TVPB-C3Spherical Roller Bearing |
| 250 kN | 270 kN | 3950 rpm | 6200 rpm | 2.95 kg2950 g |
| TIMKEN21314EJW33Spherical roller bearing |
| 292 kN | 289 kN | — | — | 2.92 kg2920 g |
| TIMKEN21314EJW33C2Spherical roller bearing |
| 292 kN | 289 kN | — | — | 2.92 kg2920 g |
| TIMKEN21314EJW33C3Spherical roller bearing |
| 292 kN | 289 kN | — | — | 2.92 kg2920 g |
| TIMKEN21314EJW33C4Spherical roller bearing |
| 292 kN | 289 kN | — | — | 2.92 kg2920 g |
| TIMKEN21314EMW33Spherical roller bearing |
| 279 kN | 271 kN | — | — | 2.94 kg2940 g |
| TIMKEN21314KEJW33Spherical roller bearing |
| 292 kN | 289 kN | — | — | 2.88 kg2880 g |
| TIMKEN21314KEJW33C3Spherical roller bearing |
| 292 kN | 289 kN | — | — | 2.88 kg2880 g |
| NSK21314EAE4Spherical roller bearing |
| 310 kN | 325 kN | — | — | 3 kg3000 g |
| NSK21314EAKE4Spherical roller bearing |
| 310 kN | 325 kN | — | — | — |
| KOYO21314RZSpherical roller bearing |
| 268 kN | 260 kN | — | 3300 rpmLimiting Speeds(Grease Lub.): 3300 min-1Limiting Speeds(Oil Lub.): 4400 min-1 | 3.19 kg3190 g |
| KOYO21314RZK+AH314Spherical roller bearing |
| 268 kN | 260 kN | — | 3300 rpmLimiting Speeds(Grease Lub.): 3300 min-1Limiting Speeds(Oil Lub.): 4400 min-1 | 3.43 kg3430 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 21314 E | Without | Normal | CN | Sheet metal | Not recorded | None |
| SKF 21314 E/C3 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF 21314 EK | Without | Normal | CN | Sheet metal | Not recorded | None |
| FAG 21314-E1-XL | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | JPA — Sheet metal cage | Not recorded | Not recorded |
| FAG 21314-E1-XL-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | JPA — Sheet metal cage | Not recorded | Not recorded |
| FAG 21314-E1-XL-C4 | Not recorded | Not recorded | C4 (Group 4) — Internal clearance larger than C3 | JPA — Sheet metal cage | Not recorded | Not recorded |
| FAG 21314-E1-XL-K | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | JPA — Sheet metal cage | Not recorded | Not recorded |
| FAG 21314-E1-XL-K-TVPB | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | TVPB — Plastic cage | Not recorded | Not recorded |
| FAG 21314-E1-XL-K-TVPB-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | TVPB — Plastic cage | Not recorded | Not recorded |
| FAG 21314-E1-XL-TVPB | Not recorded | Not recorded | CN (Group N) — Normal internal clearance | TVPB — Plastic cage | Not recorded | Not recorded |
| FAG 21314-E1-XL-TVPB-C3 | Not recorded | Not recorded | C3 (Group 3) — Internal clearance larger than CN | TVPB — Plastic cage | Not recorded | Not recorded |
| TIMKEN 21314EJW33 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 21314EJW33C2 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 21314EJW33C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 21314EJW33C4 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 21314EMW33 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 21314KEJW33 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 21314KEJW33C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| NSK 21314EAE4 | Not recorded | Not recorded | CN | Pressed steel | Not recorded | Not recorded |
| NSK 21314EAKE4 | Not recorded | Not recorded | CN | Pressed steel | Not recorded | Not recorded |
| KOYO 21314RZ | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 21314RZK+AH314 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
21314 E
Spherical roller bearing with relubrication features
View full technical record →FAG21314-E1-XL
Spherical Roller Bearing
View full technical record →FAG21314-E1-XL-C3
Spherical Roller Bearing
View full technical record →FAG21314-E1-XL-C4
Spherical Roller Bearing
View full technical record →FAG21314-E1-XL-K
Spherical Roller Bearing
View full technical record →FAG21314-E1-XL-K-TVPB
Spherical Roller Bearing
View full technical record →FAG21314-E1-XL-K-TVPB-C3
Spherical Roller Bearing
View full technical record →FAG21314-E1-XL-TVPB
Spherical Roller Bearing
View full technical record →FAG21314-E1-XL-TVPB-C3
Spherical Roller Bearing
View full technical record →NSK21314EAE4
Spherical roller bearing
View full technical record →NSK21314EAKE4
Spherical roller bearing
View full technical record →SKF21314 E/C3
Spherical roller bearing with relubrication features
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.