Find · understand · compare
206 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 206. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
206 dimensions and recorded technical data
The recorded 206 base designation measures 30×62×16 mm (inside diameter d × outside diameter D × width B). This answer uses unsuffixed records from SKF. It does not assign the same dimensions or operating ratings to every suffix.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 31 recorded variants are listed. A dash means the value is missing, not zero.
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF206Deep groove ball bearing with filling slots |
| 20.9 kN | 16.3 kN | 20000 rpm | 12000 rpm | 0.207 kg207 g |
| SKF206-2ZDeep groove ball bearing with filling slots and integral sealing |
| 20.9 kN | 16.3 kN | 20000 rpm | 9600 rpm | 0.217 kg217 g |
| SKF206-2ZNRDeep groove ball bearing with filling slots and integral sealing |
| 20.9 kN | 16.3 kN | 20000 rpm | 9600 rpm | 0.23 kg230 g |
| SKF206 NRDeep groove ball bearing with filling slots and snap ring |
| 20.9 kN | 16.3 kN | 20000 rpm | 12000 rpm | 0.222 kg222 g |
| SKF206-ZDeep groove ball bearing with filling slots and integral sealing |
| 20.9 kN | 16.3 kN | 20000 rpm | 12000 rpm | 0.21 kg210 g |
| INA206-XL-KRRDeep groove ball bearing |
| 20.7 kN | 11.3 kN | — | — | 0.24 kg240 g |
| INA206-XL-NPP-BSelf-aligning deep groove ball bearings |
| 20.7 kN | 11.3 kN | — | — | 0.19 kg190 g |
| TIMKEN206KDDFS50000Deep groove ball bearing |
| 19.5 kN | 11.3 kN | — | — | 0.2 kg200 g |
| TIMKEN206KDFS50000Deep groove ball bearing |
| 19.5 kN | 11.3 kN | — | — | 0.2 kg200 g |
| TIMKEN206KFS50000Deep groove ball bearing |
| 19.5 kN | 11.3 kN | — | — | 0.2 kg200 g |
| TIMKEN206KLDeep groove ball bearing |
| 19.5 kN | 11.3 kN | — | — | 0.23 kg230 g |
| TIMKEN206KLDDeep groove ball bearing |
| 19.5 kN | 11.3 kN | — | — | 0.23 kg230 g |
| TIMKEN206KLLDeep groove ball bearing |
| 19.5 kN | 11.3 kN | — | — | 0.23 kg230 g |
| TIMKEN206KLLFS160Deep groove ball bearing |
| 19.5 kN | 11.3 kN | — | — | 0.23 kg230 g |
| TIMKEN206KLLGDeep groove ball bearing |
| 19.5 kN | 11.3 kN | — | — | 0.26 kg260 g |
| TIMKEN206KP2-PRBDeep groove ball bearing |
| 19.5 kN | 11.3 kN | — | — | 0.25 kg250 g |
| TIMKEN206KPP16Deep groove ball bearing |
| 19.5 kN | 11.3 kN | — | — | 0.32 kg320 g |
| TIMKEN206KPP2Deep groove ball bearing |
| 19.5 kN | 11.3 kN | — | — | 0.28 kg280 g |
| TIMKEN206KPP3Deep groove ball bearing |
| 19.5 kN | 11.3 kN | — | — | 0.26 kg260 g |
| TIMKEN206KPP4Deep groove ball bearing |
| 19.5 kN | 11.3 kN | — | — | 0.28 kg280 g |
| TIMKEN206KPR4Deep groove ball bearing |
| 19.5 kN | 11.3 kN | — | — | 0.28 kg280 g |
| TIMKEN206KR7Deep groove ball bearing |
| 19.5 kN | 11.3 kN | — | — | 0.2 kg200 g |
| TIMKEN206KRR13Deep groove ball bearing |
| 19.5 kN | 11.3 kN | — | — | 0.28 kg280 g |
| TIMKEN206KRR6Deep groove ball bearing |
| 19.5 kN | 11.3 kN | — | — | 0.26 kg260 g |
| TIMKEN206KRR8Deep groove ball bearing |
| 19.5 kN | 11.3 kN | — | — | 0.35 kg350 g |
| TIMKEN206KTDeep groove ball bearing |
| 22.3 kN | 12.8 kN | — | — | 0.25 kg250 g |
| TIMKEN206KTTDeep groove ball bearing |
| 22.3 kN | 12.8 kN | — | — | 0.25 kg250 g |
| TIMKEN206PFS50000Deep groove ball bearing |
| 19.5 kN | 11.3 kN | — | — | 0.2 kg200 g |
| TIMKEN206PPFS50000Deep groove ball bearing |
| 19.5 kN | 11.3 kN | — | — | 0.2 kg200 g |
| TIMKEN206PPGFS50000Deep groove ball bearing |
| 19.5 kN | 11.3 kN | — | — | 0.2 kg200 g |
| TIMKEN206WDeep groove ball bearing |
| 27.1 kN | 17.1 kN | — | — | 0.21 kg210 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 206 | Without | Not recorded | CN | Sheet metal | Bearing steel | None |
| SKF 206-2Z | Shield on both sides | Not recorded | CN | Sheet metal | Bearing steel | Grease |
| SKF 206-2ZNR | Shield on both sides | Not recorded | CN | Sheet metal | Bearing steel | Grease |
| SKF 206 NR | Without | Not recorded | CN | Sheet metal | Bearing steel | None |
| SKF 206-Z | Shield on one side | Not recorded | CN | Sheet metal | Bearing steel | None |
| INA 206-XL-KRR | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| INA 206-XL-NPP-B | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| TIMKEN 206KDDFS50000 | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 206KDFS50000 | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 206KFS50000 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 206KL | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 206KLD | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 206KLL | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 206KLLFS160 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 206KLLG | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 206KP2-PRB | Sealed | Not recorded | Not recorded | Nylon cage | Not recorded | Not recorded |
| TIMKEN 206KPP16 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 206KPP2 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 206KPP3 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 206KPP4 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 206KPR4 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 206KR7 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 206KRR13 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 206KRR6 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 206KRR8 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 206KT | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 206KTT | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 206PFS50000 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 206PPFS50000 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 206PPGFS50000 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 206W | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
SKF
206
Deep groove ball bearing with filling slots
View full technical record →SKF206-2Z
Deep groove ball bearing with filling slots and integral sealing
View full technical record →SKF206-2ZNR
Deep groove ball bearing with filling slots and integral sealing
View full technical record →TIMKEN206KDDFS50000
Deep groove ball bearing
View full technical record →TIMKEN206KDFS50000
Deep groove ball bearing
View full technical record →TIMKEN206KFS50000
Deep groove ball bearing
View full technical record →TIMKEN206KL
Deep groove ball bearing
View full technical record →TIMKEN206KLD
Deep groove ball bearing
View full technical record →TIMKEN206KLL
Deep groove ball bearing
View full technical record →TIMKEN206KLLFS160
Deep groove ball bearing
View full technical record →TIMKEN206KLLG
Deep groove ball bearing
View full technical record →TIMKEN206KP2-PRB
Deep groove ball bearing
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.