205 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 205. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
205 dimensions and recorded technical data
Use the named dimensions for each complete record below. A generic d×D×B answer is not asserted where the base record is missing, dimension symbols are unverified, or the product uses a different geometry such as a housing or thrust assembly. Suffix records are not substituted for a missing base specification.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 25 recorded variants are listed. A dash means the value is missing, not zero.
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| INA205-XL-KRRDeep groove ball bearing |
| 14.9 kN | 7.8 kN | — | — | 0.158 kg158 g |
| INA205-XL-NPP-BSelf-aligning deep groove ball bearings |
| 14.9 kN | 7.8 kN | — | — | 0.119 kg119 g |
| TIMKEN205KDD2Deep groove ball bearing |
| 14 kN | 7.84 kN | — | — | 0.12 kg120 g |
| TIMKEN205KDGFS50000Deep groove ball bearing |
| 14 kN | 7.84 kN | — | — | 0.13 kg130 g |
| TIMKEN205KLDeep groove ball bearing |
| 14 kN | 7.84 kN | — | — | 0.13 kg130 g |
| TIMKEN205KLDDeep groove ball bearing |
| 14 kN | 7.84 kN | — | — | 0.13 kg130 g |
| TIMKEN205KLLDeep groove ball bearing |
| 14 kN | 7.84 kN | — | — | 0.13 kg130 g |
| TIMKEN205KLLG2Deep groove ball bearing |
| 14 kN | 7.84 kN | — | — | 0.13 kg130 g |
| TIMKEN205KP8FS615Deep groove ball bearing |
| 14 kN | 7.84 kN | — | — | 0.13 kg130 g |
| TIMKEN205KR3Deep groove ball bearing |
| 14 kN | 7.84 kN | — | — | 0.17 kg170 g |
| TIMKEN205KRP2Deep groove ball bearing |
| 14 kN | 7.84 kN | — | — | 0.18 kg180 g |
| TIMKEN205KRR2Deep groove ball bearing |
| 14 kN | 7.84 kN | — | — | 0.18 kg180 g |
| TIMKEN205KRR6Deep groove ball bearing |
| 14 kN | 7.84 kN | — | — | 0.13 kg130 g |
| TIMKEN205KRR8Deep groove ball bearing |
| 14 kN | 7.84 kN | — | — | 0.13 kg130 g |
| TIMKEN205KTDeep groove ball bearing |
| 14 kN | 7.84 kN | — | — | 0.13 kg130 g |
| TIMKEN205KTTDeep groove ball bearing |
| 14 kN | 7.84 kN | — | — | 0.13 kg130 g |
| TIMKEN205PP10FS544Deep groove ball bearing |
| 14 kN | 7.84 kN | — | — | 0.13 kg130 g |
| TIMKEN205PP11FS544Deep groove ball bearing |
| 14 kN | 7.84 kN | — | — | 0.17 kg170 g |
| TIMKEN205PP3Deep groove ball bearing |
| 14 kN | 7.84 kN | — | — | 0.13 kg130 g |
| TIMKEN205PP9Deep groove ball bearing |
| 14 kN | 7.84 kN | — | — | 0.13 kg130 g |
| TIMKEN205PPBDeep groove ball bearing |
| 14 kN | 7.84 kN | — | — | 0.13 kg130 g |
| TIMKEN205PPFS80000Deep groove ball bearing |
| 14 kN | 7.84 kN | — | — | 0.2 kg200 g |
| TIMKEN205PPGFS50000Deep groove ball bearing |
| 14 kN | 7.84 kN | — | — | 0.13 kg130 g |
| TIMKEN205WDeep groove ball bearing |
| 17.9 kN | 11.3 kN | — | — | 0.14 kg140 g |
| TIMKEN205WDNDeep groove ball bearing |
| 21.1 kN | 13.2 kN | — | — | 0.14 kg140 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| INA 205-XL-KRR | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| INA 205-XL-NPP-B | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| TIMKEN 205KDD2 | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 205KDGFS50000 | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 205KL | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 205KLD | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 205KLL | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 205KLLG2 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 205KP8FS615 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 205KR3 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 205KRP2 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 205KRR2 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 205KRR6 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 205KRR8 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 205KT | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 205KTT | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 205PP10FS544 | Sealed | Not recorded | Not recorded | Nylon cage | Not recorded | Not recorded |
| TIMKEN 205PP11FS544 | Sealed | Not recorded | Not recorded | Nylon cage | Not recorded | Not recorded |
| TIMKEN 205PP3 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 205PP9 | Sealed | Not recorded | Not recorded | Nylon cage | Not recorded | Not recorded |
| TIMKEN 205PPB | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 205PPFS80000 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 205PPGFS50000 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 205W | Open | Not recorded | Not recorded | Nylon cage | Not recorded | Not recorded |
| TIMKEN 205WDN | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
205KDD2
Deep groove ball bearing
View full technical record →TIMKEN205KDGFS50000
Deep groove ball bearing
View full technical record →TIMKEN205KL
Deep groove ball bearing
View full technical record →TIMKEN205KLD
Deep groove ball bearing
View full technical record →TIMKEN205KLL
Deep groove ball bearing
View full technical record →TIMKEN205KLLG2
Deep groove ball bearing
View full technical record →TIMKEN205KP8FS615
Deep groove ball bearing
View full technical record →TIMKEN205KR3
Deep groove ball bearing
View full technical record →TIMKEN205KRP2
Deep groove ball bearing
View full technical record →TIMKEN205KRR2
Deep groove ball bearing
View full technical record →TIMKEN205KRR6
Deep groove ball bearing
View full technical record →TIMKEN205KRR8
Deep groove ball bearing
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.