204 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 204. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
204 dimensions and recorded technical data
Use the named dimensions for each complete record below. A generic d×D×B answer is not asserted where the base record is missing, dimension symbols are unverified, or the product uses a different geometry such as a housing or thrust assembly. Suffix records are not substituted for a missing base specification.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 19 recorded variants are listed. A dash means the value is missing, not zero.
Read the original dimensions for 204
Boundary size alone does not describe every ring, shoulder or assembled unit. These tables retain the recorded manufacturer labels, symbols, units and limits for each complete marking. Expand a record to check its detailed measurements.
Important: an approximate value, a minimum or a maximum keeps that qualifier. These reference extracts are not CAD drawings, fit recommendations or replacement approvals.
TIMKEN 204KRR2 — 5 dimension fields
Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.
Metric and inch measurements below are the values published together in this dated manufacturer record. Their displayed rounding is retained; the inch column does not turn a metric design into an inch-series design.
Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.
This source describes a non-circular bore: the distance across flats and the minimum distance across corners are different measurements. Neither should be relabelled as a circular shaft bore. Use the matching shaft shape and the original geometry.
This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| A - Across Flats | Not supplied separately | 18 mm / 0.70 in |
| d - Across corners min | Not supplied separately | 20 mm / 0.80 in |
| O.D. (D) | D | 47 mm / 1.85 in |
| Width (B) | B | 21 mm / 0.83 in |
| Outer Ring Width (C) | C | 14 mm / 0.55 in |
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| INA204-XL-KRRDeep groove ball bearing |
| 13.6 kN | 6.6 kN | — | — | 0.11 kg110 g |
| INA204-XL-NPP-BSelf-aligning deep groove ball bearings |
| 13.6 kN | 6.6 kN | — | — | 0.09 kg90 g |
| INA204-XL-NPP-B-C3Self-aligning deep groove ball bearings |
| 13.6 kN | 6.6 kN | — | — | 0.09 kg90 g |
| TIMKEN204KDD6FS50000Deep groove ball bearing |
| 12.8 kN | 6.58 kN | — | — | 0.1 kg100 g |
| TIMKEN204KLDeep groove ball bearing |
| 12.8 kN | 6.58 kN | — | — | 0.11 kg110 g |
| TIMKEN204KLDDeep groove ball bearing |
| 12.8 kN | 6.58 kN | — | — | 0.11 kg110 g |
| TIMKEN204KLL2Deep groove ball bearing |
| 12.8 kN | 6.58 kN | — | — | 0.11 kg110 g |
| TIMKEN204KLLG2Deep groove ball bearing |
| 12.8 kN | 6.58 kN | — | — | 0.11 kg110 g |
| TIMKEN204KRD4Deep groove ball bearing |
| 12.8 kN | 6.58 kN | — | — | 0.11 kg110 g |
| TIMKEN204KRR2Deep groove ball bearing |
| 12.8 kN | 6.58 kN | — | — | 0.13 kg130 g |
| TIMKEN204KTDDeep groove ball bearing |
| 12.8 kN | 6.58 kN | — | — | 0.11 kg110 g |
| TIMKEN204KTTDeep groove ball bearing |
| 12.8 kN | 6.58 kN | — | — | 0.12 kg120 g |
| TIMKEN204PP4Deep groove ball bearing |
| 12.8 kN | 6.58 kN | — | — | 0.1 kg100 g |
| TIMKEN204PP7Deep groove ball bearing |
| 12.8 kN | 6.58 kN | — | — | 0.1 kg100 g |
| TIMKEN204PY2Deep groove ball bearing |
| 12.8 kN | 6.58 kN | — | — | 0.12 kg120 g |
| TIMKEN204PY3Deep groove ball bearing |
| 12.8 kN | 6.58 kN | — | — | 0.12 kg120 g |
| TIMKEN204RR8Deep groove ball bearing |
| 12.8 kN | 6.58 kN | — | — | 0.12 kg120 g |
| TIMKEN204WDeep groove ball bearing |
| 15.8 kN | 9.05 kN | — | — | 0.11 kg110 g |
| TIMKEN204WDDeep groove ball bearing |
| 18.5 kN | 10.5 kN | — | — | 0.11 kg110 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| INA 204-XL-KRR | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| INA 204-XL-NPP-B | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| INA 204-XL-NPP-B-C3 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| TIMKEN 204KDD6FS50000 | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 204KL | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 204KLD | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 204KLL2 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 204KLLG2 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 204KRD4 | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 204KRR2 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 204KTD | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 204KTT | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 204PP4 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 204PP7 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 204PY2 | Sealed | Not recorded | Not recorded | Nylon cage | Not recorded | Not recorded |
| TIMKEN 204PY3 | Sealed | Not recorded | Not recorded | Nylon cage | Not recorded | Not recorded |
| TIMKEN 204RR8 | Sealed | Not recorded | Not recorded | Nylon cage | Not recorded | Not recorded |
| TIMKEN 204W | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 204WD | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
204KDD6FS50000
Deep groove ball bearing
View full technical record →TIMKEN204KL
Deep groove ball bearing
View full technical record →TIMKEN204KLD
Deep groove ball bearing
View full technical record →TIMKEN204KLL2
Deep groove ball bearing
View full technical record →TIMKEN204KLLG2
Deep groove ball bearing
View full technical record →TIMKEN204KRD4
Deep groove ball bearing
View full technical record →TIMKEN204KRR2
Deep groove ball bearing
View full technical record →TIMKEN204KTD
Deep groove ball bearing
View full technical record →TIMKEN204KTT
Deep groove ball bearing
View full technical record →TIMKEN204PP4
Deep groove ball bearing
View full technical record →TIMKEN204PP7
Deep groove ball bearing
View full technical record →TIMKEN204PY2
Deep groove ball bearing
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.