16012 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 16012. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
16012 dimensions and recorded technical data
The recorded 16012 base designation measures 60×95×11 mm (inside diameter d × outside diameter D × width B). This answer uses unsuffixed records from SKF, FAG, NSK, KOYO. It does not assign the same dimensions or operating ratings to every suffix.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 5 recorded variants are listed. A dash means the value is missing, not zero.
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF16012Deep groove ball bearing |
| 20.8 kN | 15 kN | 15000 rpm | 9500 rpm | 0.279 kg279 g |
| FAG16012Deep groove ball bearing |
| 21.2 kN | 17.5 kN | 5700 rpm | 10500 rpm | 0.271 kg271 g |
| NSK16012Deep groove ball bearing |
| 22 kN | 17.5 kN | — | — | 0.281 kg281 g |
| KOYO16012Deep groove ball bearing |
| 24.8 kN | 17.6 kN | — | 6900 rpmLimiting Speeds(Grease Lub.): 6900 min-1Limiting Speeds(Oil Lub.): 8100 min-1 | 0.28 kg280 g |
| FAG16012-C3Deep groove ball bearing |
| 21.2 kN | 17.5 kN | 5700 rpm | 10500 rpm | 0.271 kg271 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 16012 | Without | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| FAG 16012 | Without — Not sealed | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| NSK 16012 | Open | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 16012 | Open | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| FAG 16012-C3 | Without — Not sealed | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
16012
Deep groove ball bearing
View full technical record →FAG16012
Deep groove ball bearing
View full technical record →KOYO16012
Deep groove ball bearing
View full technical record →NSK16012
Deep groove ball bearing
View full technical record →FAG16012-C3
Deep groove ball bearing
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.