16011 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 16011. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
16011 dimensions and recorded technical data
The recorded 16011 base designation measures 55×90×11 mm (inside diameter d × outside diameter D × width B). This answer uses unsuffixed records from SKF, FAG, NSK, KOYO. It does not assign the same dimensions or operating ratings to every suffix.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 8 recorded variants are listed. A dash means the value is missing, not zero.
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF16011Deep groove ball bearing |
| 20.3 kN | 14 kN | 16000 rpm | 10000 rpm | 0.269 kg269 g |
| FAG16011Deep groove ball bearing |
| 20.6 kN | 16.3 kN | 6200 rpm | 11200 rpm | 0.265 kg265 g |
| NSK16011Deep groove ball bearing |
| 21.4 kN | 16.3 kN | — | — | 0.257 kg257 g |
| KOYO16011Deep groove ball bearing |
| 24.2 kN | 16.3 kN | — | 7400 rpmLimiting Speeds(Grease Lub.): 7400 min-1Limiting Speeds(Oil Lub.): 8800 min-1 | 0.26 kg260 g |
| SKF16011/C3Deep groove ball bearing |
| 20.3 kN | 14 kN | 16000 rpm | 10000 rpm | 0.269 kg269 g |
| FAG16011-ADeep groove ball bearing |
| 20.6 kN | 16.3 kN | 6000 rpm | 10900 rpm | 0.259 kg259 g |
| FAG16011-A-C3Deep groove ball bearing |
| 20.6 kN | 16.3 kN | 6000 rpm | 10900 rpm | 0.26 kg260 g |
| FAG16011-C3Deep groove ball bearing |
| 20.6 kN | 16.3 kN | 6200 rpm | 11200 rpm | 0.257 kg257 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 16011 | Without | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| FAG 16011 | Without — Not sealed | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| NSK 16011 | Open | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 16011 | Open | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| SKF 16011/C3 | Without | Not recorded | C3 | Sheet metal | Bearing steel | None |
| FAG 16011-A | Without — Not sealed | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 16011-A-C3 | Without — Not sealed | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 16011-C3 | Without — Not sealed | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
16011
Deep groove ball bearing
View full technical record →FAG16011
Deep groove ball bearing
View full technical record →KOYO16011
Deep groove ball bearing
View full technical record →NSK16011
Deep groove ball bearing
View full technical record →FAG16011-A
Deep groove ball bearing
View full technical record →FAG16011-A-C3
Deep groove ball bearing
View full technical record →SKF16011/C3
Deep groove ball bearing
View full technical record →FAG16011-C3
Deep groove ball bearing
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.