99,016 bearing records · search, filter and compare

info@bearingscope.com
Find · understand · compare

16002 bearing dimensions & suffix variants

Look up recorded dimensions for designations beginning with 16002. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.

On this page5 sections

Find by measured dimensions

Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.

For tapered assemblies use total width T; for units or flanged bearings also check the mounting drawing.

Exact model evidence

16002 dimensions and recorded technical data

The recorded 16002 base designation measures 15×32×8 mm (inside diameter d × outside diameter D × width B). This answer uses unsuffixed records from SKF, NSK, KOYO. It does not assign the same dimensions or operating ratings to every suffix.

The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 10 recorded variants are listed. A dash means the value is missing, not zero.

Brand / full designationNamed dimensions (mm / in)Dynamic C (kN)Static C0 (kN)Reference speed (rpm)Limiting speed (rpm)Mass (kg / g)
SKF16002Deep groove ball bearing
Bore diameter (d)
15 mm
0.590551 in
Outside diameter (D)
32 mm
1.259843 in
Width (B)
8 mm
0.314961 in
5.85 kN2.85 kN50000 rpm32000 rpm0.0259 kg25.9 g
NSK16002Deep groove ball bearing
Bore diameter (d)
15 mm
0.590551 in
Outside diameter (D)
32 mm
1.259843 in
Bearing width (B)
8 mm
0.314961 in
6.15 kN2.84 kN——0.027 kg27 g
KOYO16002Deep groove ball bearing
Bore diameter (d)
15 mm
0.590551 in
Outside diameter (D)
32 mm
1.259843 in
Width (B)
8 mm
0.314961 in
7 kN2.85 kN—23000 rpmLimiting Speeds(Grease Lub.): 23000 min-1Limiting Speeds(Oil Lub.): 28000 min-10.025 kg25 g
SKF16002-2ZDeep groove ball bearing with seals or shields
Bore diameter (d)
15 mm
0.590551 in
Outside diameter (D)
32 mm
1.259843 in
Width (B)
8 mm
0.314961 in
5.85 kN2.85 kN50000 rpm26000 rpm0.0281 kg28.1 g
SKF16002/C3Deep groove ball bearing
Recorded bore (d)
15 mm
0.590551 in
Recorded outside dimension (D)
32 mm
1.259843 in
Catalogue width (symbol unverified)
8 mm
0.314961 in
5.85 kN2.85 kN50000 rpm32000 rpm0.0256 kg25.6 g
FAG16002-ADeep groove ball bearing
Bore diameter (d)
15 mm
0.590551 in
Outside diameter (D)
32 mm
1.259843 in
Width (B)
8 mm
0.314961 in
5.9 kN2.85 kN20000 rpm33500 rpm0.024 kg24 g
FAG16002-A-2ZDeep groove ball bearing
Bore diameter (d)
15 mm
0.590551 in
Outside diameter (D)
32 mm
1.259843 in
Width (B)
8 mm
0.314961 in
5.9 kN2.85 kN20000 rpm28500 rpm0.02753 kg27.53 g
FAG16002-A-2Z-C3Deep groove ball bearing
Bore diameter (d)
15 mm
0.590551 in
Outside diameter (D)
32 mm
1.259843 in
Width (B)
8 mm
0.314961 in
5.9 kN2.85 kN20000 rpm28500 rpm0.027 kg27 g
FAG16002-A-C3Deep groove ball bearing
Bore diameter (d)
15 mm
0.590551 in
Outside diameter (D)
32 mm
1.259843 in
Width (B)
8 mm
0.314961 in
5.9 kN2.85 kN20000 rpm33500 rpm0.025 kg25 g
FAG16002-A-ZDeep groove ball bearing
Bore diameter (d)
15 mm
0.590551 in
Outside diameter (D)
32 mm
1.259843 in
Width (B)
8 mm
0.314961 in
5.9 kN2.85 kN20000 rpm33500 rpm0.027 kg27 g
Compare recorded seals, clearance, precision and materials

Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.

Brand / designationClosureOriginal precisionClearanceCageMaterialLubricant
SKF 16002WithoutP6 and tighter width toleranceCNSheet metalBearing steelNone
NSK 16002OpenNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 16002OpenNot recordedNot recordedNot recordedNot recordedNot recorded
SKF 16002-2ZShield on both sidesP6 and tighter width toleranceCNSheet metalBearing steelGrease
SKF 16002/C3WithoutNot recordedC3Sheet metalBearing steelNone
FAG 16002-AWithout — Not sealedPN — Normal (ISO 492:2023)CN (Group N) — Normal internal clearanceJN — Steel sheet metalNot recordedWithout — Bearing not greased
FAG 16002-A-2Z2Z — Non-contact shield on both sidesPN — Normal (ISO 492:2023)CN (Group N) — Normal internal clearanceJN — Steel sheet metalNot recordedLubricating grease
FAG 16002-A-2Z-C32Z — Non-contact shield on both sidesPN — Normal (ISO 492:2023)C3 (Group 3) — Internal clearance larger than CNJN — Steel sheet metalNot recordedLubricating grease
FAG 16002-A-C3Without — Not sealedPN — Normal (ISO 492:2023)C3 (Group 3) — Internal clearance larger than CNJN — Steel sheet metalNot recordedWithout — Bearing not greased
FAG 16002-A-ZZ — Non-contact shield on one SidePN — Normal (ISO 492:2023)CN (Group N) — Normal internal clearanceJN — Steel sheet metalNot recordedWithout — Bearing not greased

How to compare these values

  • Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
  • Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
  • C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
  • Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
  • A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Check load calculations →Estimate rating life →Decode the complete marking →Check replacement evidence →

Related prefix matches — other model numbers may appear

These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.

SKF

16002

Deep groove ball bearing

View full technical record →KOYO

16002

Deep groove ball bearing

View full technical record →NSK

16002

Deep groove ball bearing

View full technical record →SKF

16002-2Z

Deep groove ball bearing with seals or shields

View full technical record →FAG

16002-A

Deep groove ball bearing

View full technical record →FAG

16002-A-2Z

Deep groove ball bearing

View full technical record →FAG

16002-A-2Z-C3

Deep groove ball bearing

View full technical record →FAG

16002-A-C3

Deep groove ball bearing

View full technical record →FAG

16002-A-Z

Deep groove ball bearing

View full technical record →SKF

16002/C3

Deep groove ball bearing

View full technical record →
Filter all 10 prefix results →

Check the drawing before substituting

Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.

Measurement guide →Cross-reference checks →

Reference basis & data limits

Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.

Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.

Search the consolidated catalogue

Find, filter and compare bearing model data in one place.

Open model search