Independent technical reference

Trailer bearing sizes, part numbers and kit identification

Identify a trailer bearing from the axle and hub assembly, the inner and outer bearing markings, and the matching cups and seal. Trailer make, wheel diameter, lug count or nominal axle capacity alone does not establish a complete replacement kit.

Check the evidence Practical steps Limits Tools

On this page18 sections

Parts inside the kit, not a sales listing

Trailer bearing kit contents finder

Start with a complete kit number, bearing marking or seal reference. Inspect the listed quantities, then compare what is — and is not — included.

102source-scoped kit records
7 different package types

What is the difference between a bearing pair, an axle kit and a hub assembly?

01 · Cup + coneOne bearing position.
No seal unless explicitly listed.

02 · Bearing kitCheck both bearing positions,
seal and hardware separately.

03 · Axle packageMay supply two wheel ends
or conditional seal alternatives.

04 · Hub assemblyIncludes a hub or hub-drum.
Cups may be supplied in the hub.

Every record and its contents can be read below without JavaScript. Open a kit and use your browser's Find command for a part number. Interactive filtering and side-by-side selection require JavaScript.

102 kit records. Historical catalogue scopes are preserved.

Read the data limits ↓

Bearing and seal kit

K71-715-00

Catalogue context: 2K hub inner and outer bearing L44643 / L44643.

Seal listed5 content rowsContents also checked against current Dexter page

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
1	005-101-00	Washer, Tang
1	010-003-00	Seal, Grease 1.23 ID
1	019-002-00	Cotter Pin
2	031-031-01	Bearing Cup (L44610)
2	031-031-03	Bearing Cone (L44643)

Dexter Parts Kit Catalogue · March 2017 · printed p. 93. Current Dexter product page checked 2026-10-04; part references, quantities and bearing markings corroborated. Historical context is not current availability or fitment approval.

Bearing and seal kit

K71-716-00

Catalogue context: 2K hub inner and outer bearing L44649 / L44649.

Seal listed5 content rowsContents also checked against current Dexter page

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
1	005-101-00	Washer, Tang
1	010-060-00	Seal, Oil 1.5 ID
1	019-002-00	Cotter Pin
2	031-031-01	Bearing Cup (L44610)
2	031-031-02	Bearing Cone (L44649)

Bearing and seal kit

K71-717-00

Catalogue context: 3.5K hub inner and outer bearing L44649 / L68149.

Seal listed7 content rowsContents also checked against current Dexter page

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
1	005-101-00	Washer, Tang
1	010-019-00	Seal, Grease 1.72 ID
1	019-002-00	Cotter Pin
1	031-031-01	Bearing Cup (L44610)
1	031-031-02	Bearing Cone (L44649)
1	031-033-01	Bearing Cup (L68111)
1	031-033-02	Bearing Cone (L68149)

Bearing and seal kit

K71-718-00

Catalogue context: 4.4K hub inner and outer bearing LM67048 / L68149.

Seal listed6 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
1	010-019-00	Seal, Grease 1.72 ID
1	019-002-00	Cotter Pin
1	031-032-01	Bearing Cup (LM67010)
1	031-032-02	Bearing Cone (LM67048)
1	031-033-01	Bearing Cup (L68111)
1	031-033-02	Bearing Cone (L68149)

Dexter Parts Kit Catalogue · March 2017 · printed p. 93. Historical context is not current availability or fitment approval.

Bearing and seal kit

K71-719-00

Catalogue context: 6K hub inner and outer bearing 15123 / 25580.

Seal listed7 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
1	005-101-00	Washer, Tang
1	010-036-00	Seal, 2.25 ID
1	019-002-00	Cotter Pin
1	031-029-01	Bearing Cup (15245)
1	031-029-02	Bearing Cone (15123)
1	031-030-01	Bearing Cup (25520)
1	031-030-02	Bearing Cone (25580)

Dexter Parts Kit Catalogue · March 2017 · printed p. 94. Historical context is not current availability or fitment approval.

Bearing and seal kit

K71-720-00

Catalogue context: 7K hub inner and outer bearing 14125A / 25580.

Seal listed7 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
1	005-101-00	Washer, Tang
1	010-036-00	Seal, 2.25 ID
1	019-002-00	Cotter Pin
1	031-017-01	Bearing Cup (14276)
1	031-017-02	Bearing Cone (14125A)
1	031-030-01	Bearing Cup (25520)
1	031-030-02	Bearing Cone (25580)

Dexter Parts Kit Catalogue · March 2017 · printed p. 94. Historical context is not current availability or fitment approval.

Bearing and seal kit

K71-721-00

Catalogue context: 7.2K and 8K hub inner and outer bearing 02475 / 25580.

Seal listed6 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
1	010-036-00	Seal, 2.25 ID
1	019-002-00	Cotter Pin
1	031-028-01	Bearing Cup (02420)
1	031-028-02	Bearing Cone (02475)
1	031-030-01	Bearing Cup (25520)
1	031-030-02	Bearing Cone (25580)

Dexter Parts Kit Catalogue · March 2017 · printed p. 94. Historical context is not current availability or fitment approval.

Bearing and seal kit

K71-722-00

Catalogue context: 9K and 10K hub inner and outer bearing 387A / 25580.

Seal listed5 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
1	010-051-02	Seal, Oil 2.875 ID
1	031-019-01	Bearing Cup (382A)
1	031-019-02	Bearing Cone (387A)
1	031-030-01	Bearing Cup (25520)
1	031-030-02	Bearing Cone (25580)

Dexter Parts Kit Catalogue · March 2017 · printed p. 94. Historical context is not current availability or fitment approval.

Cup and cone pair

K71-306-00

Catalogue context: Dexter 7" hub inner and outer, 10" x 1¹⁄₂" outer and 10" x 2¹⁄₄" outer, L44610 / L44649.

No seal listed2 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
1	031-031-01	Bearing Cup (L44610)
1	031-031-02	Bearing Cone (L44649)

Dexter Parts Kit Catalogue · March 2017 · printed p. 95. Historical context is not current availability or fitment approval.

Cup and cone pair

K71-307-00

Catalogue context: Dexter 10" x 1¹⁄₂" hub inner, 10" x 2¹⁄₄" outer (4.4K) and 12" x 2" outer, LM67010 / LM67048.

No seal listed2 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
1	031-032-01	Bearing Cup (LM67010)
1	031-032-02	Bearing Cone (LM67048)

Dexter Parts Kit Catalogue · March 2017 · printed p. 95. Historical context is not current availability or fitment approval.

Cup and cone pair

K71-308-00

Catalogue context: Dexter 12" x 2" and 12¹⁄₄" x 2¹⁄₂" hub inner, 25520 / 25580.

No seal listed2 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
1	031-030-01	Bearing Cup (25520)
1	031-030-02	Bearing Cone (25580)

Dexter Parts Kit Catalogue · March 2017 · printed p. 95. Historical context is not current availability or fitment approval.

Cup and cone pair

K71-309-00

Catalogue context: Dexter 8-174 wheel and drum outer, 15245 / 15123.

No seal listed2 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
1	031-029-01	Bearing Cup (15245)
1	031-029-02	Bearing Cone (15123)

Dexter Parts Kit Catalogue · March 2017 · printed p. 96. Historical context is not current availability or fitment approval.

Cup and cone pair

K71-310-00

Catalogue context: Dexter 12" x 2" hub 8 bolt outer, 14276 / 14125A.

No seal listed2 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
1	031-017-01	Bearing Cup (14276)
1	031-017-02	Bearing Cone (14125A)

Dexter Parts Kit Catalogue · March 2017 · printed p. 96. Historical context is not current availability or fitment approval.

Cup and cone pair

K71-390-00

Catalogue context: Dexter 10" x 2¹⁄₄" hub inner, L68111 / L68149.

No seal listed2 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
1	031-033-01	Bearing Cup (L68111)
1	031-033-02	Bearing Cone (L68149)

Dexter Parts Kit Catalogue · March 2017 · printed p. 95. Historical context is not current availability or fitment approval.

Cup and cone pair

K71-415-00

Catalogue context: Dexter 12¹⁄₄" x 2¹⁄₂" hub and 12¹⁄₄" x 3³⁄₈" hub outer, 02420 / 02475.

No seal listed2 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
1	031-028-01	Bearing Cup (02420)
1	031-028-02	Bearing Cone (02475)

Dexter Parts Kit Catalogue · March 2017 · printed p. 96. Historical context is not current availability or fitment approval.

Cup and cone pair

K71-710-00

Catalogue context: Dexter 10K HD outer and 9K-10K GD inner.

No seal listed2 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
1	031-019-01	Bearing Cup (382A)
1	031-019-02	Bearing Cone (387A)

Dexter Parts Kit Catalogue · March 2017 · printed p. 96. Historical context is not current availability or fitment approval.

Cup and cone pair

K71-712-00

Catalogue context: Dexter 12K and 15K inner bearings, 3920 / 3984.

No seal listed2 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
1	031-020-01	Bearing Cup (3920)
1	031-020-02	Bearing Cone (3984)

Dexter Parts Kit Catalogue · March 2017 · printed p. 97. Historical context is not current availability or fitment approval.

Cup and cone pair

K71-713-00

Catalogue context: Dexter 12K and 15K outer bearings, 28622 / 28682.

No seal listed2 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
1	031-021-01	Bearing Cup (28622)
1	031-021-02	Bearing Cone (28682)

Dexter Parts Kit Catalogue · March 2017 · printed p. 97. Historical context is not current availability or fitment approval.

Cup and cone pair

K71-714-00

Catalogue context: Dexter 10K HD inner and #13D inner, 394A / 395S.

No seal listed2 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
1	031-022-01	Bearing Cup (394A)
1	031-022-02	Bearing Cone (395S)

Dexter Parts Kit Catalogue · March 2017 · printed p. 97. Historical context is not current availability or fitment approval.

Axle replacement kit

K71-043-00

Catalogue context: Bearing and Seal Replacement Kit: 7K 865, 2.717" Outer Bore

Seal listed6 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
2	Not individually numbered	Seal
2	25520	25520 Inner Race
2	25580	25580 Inner Bearing
2	15245	15245 Outer Race
2	15123	15123 Outer Bearing
2	Not individually numbered	Cotter Pin

UFP Service Parts · July 2016 · printed p. 38. Historical context is not current availability or fitment approval.

Axle replacement kit

K71-044-00

Catalogue context: Bearing and Seal Replacement Kit: 6K 655, 2.441" Outer Bore

Seal listed6 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
2	Not individually numbered	Seal
2	25520	25520 Inner Race
2	25580	25580 Inner Bearing
2	14276	14276 Outer Race
2	14125A	14125A Outer Bearing
2	Not individually numbered	Cotter Pin

UFP Service Parts · July 2016 · printed p. 38. Historical context is not current availability or fitment approval.

Axle replacement kit

K71-055-00

Catalogue context: Bearing and Seal Replacement Kit: 5.2K 655, 2.328" Outer Bore

Seal listed6 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
2	Not individually numbered	Seal
2	25520	25520 Inner Race
2	25580	25580 Inner Bearing
2	LM67010	LM67010 Outer Race
2	LM67048	LM67048 Outer Bearing
2	Not individually numbered	Cotter Pin

UFP Service Parts · July 2016 · printed p. 38. Historical context is not current availability or fitment approval.

Axle replacement kit

K71-058-00

Catalogue context: Bearing and Seal Replacement Kit: 4.2K 545, 2.328" Outer Bore

Seal listed7 content rowsConditional alternatives — inspect before choosing

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
2	Not individually numbered	2.56 x 1.68 Seal for New Axles
2	Not individually numbered	2.33 x 1.68 Seal for Older Axles
2	L68110	L68110 Inner Race
2	L68149	L68149 Inner Bearing
2	L68110	L68110 Outer Race
2	L68149	L68149 Outer Bearing
2	Not individually numbered	Cotter Pin

Do not install all listed alternatives together. The source distinguishes older/newer axles or hubs. Establish the actual assembly before choosing a seal or cup.

UFP Service Parts · July 2016 · printed p. 39. Historical context is not current availability or fitment approval.

Axle replacement kit

K71-059-00

Catalogue context: Bearing and Seal Replacement Kit: 3.2 and 3.7K 545, 1.980" Outer Bore

Seal listed8 content rowsConditional alternatives — inspect before choosing

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
2	Not individually numbered	2.56 x 1.68 Seal for New Axles
2	Not individually numbered	2.33 x 1.68 Seal for Older Axles
2	L68110	L68110 Inner Race
2	L68111	L68111 Inner Race for Newer Hubs
2	L68149	L68149 Inner Bearing
2	L44610	L44610 Outer Race for Older Hubs
2	L44649	L44649 Outer Bearing
2	Not individually numbered	Cotter Pin

Do not install all listed alternatives together. The source distinguishes older/newer axles or hubs. Establish the actual assembly before choosing a seal or cup.

UFP Service Parts · July 2016 · printed p. 39. Historical context is not current availability or fitment approval.

Axle replacement kit

K71-060-00

Catalogue context: Bearing and Seal Replacement Kit: 2.1K and 2.5K 545, 1.980" Outer Bore

Seal listed5 content rowsConditional alternatives — inspect before choosing

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
2	Not individually numbered	1.98 x 1.38 Seal for Older Axles
2	Not individually numbered	1.98 x 1.25 Seal for New Axles
4	L44610	L44610 Inner and Outer Race
4	L44649	L44649 Inner and Outer Bearing
2	Not individually numbered	Cotter Pin

Do not install all listed alternatives together. The source distinguishes older/newer axles or hubs. Establish the actual assembly before choosing a seal or cup.

UFP Service Parts · July 2016 · printed p. 39. Historical context is not current availability or fitment approval.

Bearing set (no seal listed)

K71-790-00

Catalogue context: Bearing Kit for 1¹⁄₄" Spindle

No seal listed3 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
2	LM67048	LM67048 Cone
2	LM67010	LM67010 Cup
1	Not individually numbered	Cotter Pin

UFP Service Parts · July 2016 · printed p. 40. Historical context is not current availability or fitment approval.

Bearing set (no seal listed)

K71-791-00

Catalogue context: Bearing Kit for 1 ¹⁄₁₆" - ³⁄₄" Spindle

No seal listed5 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
1	L44649	L44649 Cone
1	L44610	L44610 Cup
1	LM11949	LM11949 Cone
1	LM11910	LM11910 Cup
1	Not individually numbered	Cotter Pin

UFP Service Parts · July 2016 · printed p. 40. Historical context is not current availability or fitment approval.

Bearing set (no seal listed)

K71-792-00

Catalogue context: Bearing Kit for 1³⁄₈" - 1 ¹⁄₁₆" Spindle

No seal listed5 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
1	L68149	L68149 Cone
1	L68110	L68110 Cup
1	L44649	L44649 Cone
1	L44610	L44610 Cup
1	Not individually numbered	Cotter Pin

UFP Service Parts · July 2016 · printed p. 41. Historical context is not current availability or fitment approval.

Bearing set (no seal listed)

K71-793-00

Catalogue context: Bearing Kit for 1 ³⁄₈" - 1 ¹⁄₁₆" Spindle

No seal listed5 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
1	L68149	L68149 Cone
1	L68111	L68111 Cup
1	L44649	L44649 Cone
1	L44610	L44610 Cup
1	Not individually numbered	Cotter Pin

UFP Service Parts · July 2016 · printed p. 41. Historical context is not current availability or fitment approval.

Bearing set (no seal listed)

K71-796-00

Catalogue context: Bearing Kit for 1 ³⁄₈" - 1 ³⁄₈" Spindle

No seal listed3 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
2	L68149	L68149 Cone
2	L68110	L68110 Cup
1	Not individually numbered	Cotter Pin

UFP Service Parts · July 2016 · printed p. 42. Historical context is not current availability or fitment approval.

Seal kit

K71-303-00

Catalogue context: 3,500–3,700 lb hubs and hub-rotors

Seal listed1 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
2	010-019-00	Grease seal; ID 1.72 in; OD 2.565 in

Kodiak by Dexter Catalogue · July 2024 · printed p. 33. Historical context is not current availability or fitment approval.

Seal kit

K71-305-00

Catalogue context: 6,000–8,000 lb hubs and hub-rotors

Seal listed1 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
2	010-036-00	Grease seal; ID 2.25 in; OD 3.376 in

Kodiak by Dexter Catalogue · July 2024 · printed p. 33. Historical context is not current availability or fitment approval.

Seal kit

K71-386-00

Catalogue context: 7,200–8,000 lb hubs

Seal listed1 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
2	010-063-00	Oil seal; ID 2.25 in; OD 3.376 in

Kodiak by Dexter Catalogue · July 2024 · printed p. 33. Historical context is not current availability or fitment approval.

Seal kit

K71-387-00

Catalogue context: 10,000 lb hubs

Seal listed1 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
2	010-051-02	Oil seal; ID 2.875 in; OD 3.785 in

Kodiak by Dexter Catalogue · July 2024 · printed p. 33. Historical context is not current availability or fitment approval.

Seal kit

K71-782-00

Catalogue context: Spindo Seal #1 Kit

Seal listed3 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
2	Not individually numbered	O-ring
2	Not individually numbered	Stainless Steel Wear Ring
2	Not individually numbered	Seals

UFP Service Parts · July 2016 · printed p. 42. Historical context is not current availability or fitment approval.

Seal kit

K71-783-00

Catalogue context: Spindo Seal #2 Kit

Seal listed3 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
2	Not individually numbered	O-ring
2	Not individually numbered	Stainless Steel Wear Ring
2	Not individually numbered	Seals

UFP Service Parts · July 2016 · printed p. 42. Historical context is not current availability or fitment approval.

Seal kit

K71-784-00

Catalogue context: Spindo Seal #11 Kit

Seal listed3 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
2	Not individually numbered	O-ring
2	Not individually numbered	Stainless Steel Wear Ring
2	Not individually numbered	Seals

UFP Service Parts · July 2016 · printed p. 42. Historical context is not current availability or fitment approval.

Seal kit

K71-797-00

Catalogue context: Seal Kit: 1.98" OD x 1.25" ID

Seal listed1 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
2	Not individually numbered	Seals

UFP Service Parts · July 2016 · printed p. 42. Historical context is not current availability or fitment approval.

Hub assembly

K08-091-90

Catalogue context: 2K idler axle, 4-4.00 BC, tapped holes, ¹⁄₂"-20, grease lube.

Seal listed6 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
4	007-040-00	Bolt, 60-deg
1	008-091-04	Hub, 2.2K, 440, Tapped w/Cups
1	010-009-00	Seal, Grease 1.50 ID
1	021-003-00	Grease Cap
2	031-031-02	Bearing Cone (L44649)
1	059-831-00	Instruction Sheet

“Cupped” or “with cups” describes the supplied hub. A separate cup part number has not been invented when the source does not list one.

Dexter Parts Kit Catalogue · March 2017 · printed p. 74. Historical context is not current availability or fitment approval.

Hub assembly

K08-091-91

Catalogue context: 2K idler axle, 4-4.00 BC, studded ¹⁄₂"-20, grease lube.

Seal listed6 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
4	006-080-00	Nut, Cone 60-deg
1	008-091-05	Hub, 2.2K, 440, Cupped & Studded
1	010-009-00	Seal, Grease 1.50 ID
1	021-003-00	Grease Cap
2	031-031-02	Bearing Cone (L44649)
1	059-831-00	Instruction Sheet

“Cupped” or “with cups” describes the supplied hub. A separate cup part number has not been invented when the source does not list one.

Dexter Parts Kit Catalogue · March 2017 · printed p. 74. Historical context is not current availability or fitment approval.

Hub assembly

K08-213-90

Catalogue context: 5.2K idler axle, 6-5.50 BC, studded ¹⁄₂"-20, 2.125 seal, standard grease cap.

Seal listed7 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
6	006-080-00	Nut, Cone 60-deg
1	008-213-05	Hub, 5.2K, 655, LM67010 Outer, Cupped & Studded
1	010-010-00	Seal, Oil 2.125 ID
1	021-001-00	Grease Cap
1	031-030-02	Bearing Cone (25580)
1	031-032-02	Bearing Cone (LM67048)
1	059-831-00	Instruction Sheet

“Cupped” or “with cups” describes the supplied hub. A separate cup part number has not been invented when the source does not list one.

Dexter Parts Kit Catalogue · March 2017 · printed p. 82. Historical context is not current availability or fitment approval.

Hub assembly

K08-213-9C

Catalogue context: 6K idler axle, 6-5.50 BC, studded ¹⁄₂"-20, 2.25 seal, standard grease cap.

Seal listed7 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
6	006-080-00	Nut, Cone 60-deg
1	008-213-09	Hub, 6K, 655, 15245 Outer, Cupped & Studded
1	010-036-00	Seal, 2.25 ID
1	021-001-00	Grease Cap
1	031-029-02	Bearing Cone (15123)
1	031-030-02	Bearing Cone (25580)
1	059-831-00	Instruction Sheet

“Cupped” or “with cups” describes the supplied hub. A separate cup part number has not been invented when the source does not list one.

Dexter Parts Kit Catalogue · March 2017 · printed p. 84. Historical context is not current availability or fitment approval.

Hub assembly

K08-214-92

Catalogue context: 10K HD axle, 8-6.50 BC, studded ⁵⁄₈"-18, oil seal, inner bearing (395S), outer bearing (387A) and oil cap.

Seal listed10 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
8	006-109-00	Nut, Cone 90-deg
1	008-214-05	Hub, 10K HD, 865, 4.75 Pilot, Cupped & Studded
1	010-050-00	O-Ring
1	010-056-00	Seal, Oil 3.125 ID
1	021-036-00	Oil Cap
1	031-019-02	Bearing Cone (387A)
1	031-022-02	Bearing Cone (395S)
1	033-052-01	Clamp Ring
1	046-032-00	Rubber Plug
1	059-831-00	Instruction Sheet

“Cupped” or “with cups” describes the supplied hub. A separate cup part number has not been invented when the source does not list one.

Dexter Parts Kit Catalogue · March 2017 · printed p. 91. Historical context is not current availability or fitment approval.

Hub assembly

K08-231-92

Catalogue context: 7K axle, 8-6.50 BC, studded ¹⁄₂"-20, 2.125 seal, standard grease cap.

Seal listed7 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
8	006-080-00	Nut, Cone 60-deg
1	008-231-09	Hub, 7K, 865, ¹⁄₂"-20, Cupped & Studded
1	010-010-00	Seal, Oil 2.125 ID
1	021-039-00	Grease Cap
1	031-017-02	Bearing Cone (14125A)
1	031-030-02	Bearing Cone (25580)
1	059-831-00	Instruction Sheet

“Cupped” or “with cups” describes the supplied hub. A separate cup part number has not been invented when the source does not list one.

Dexter Parts Kit Catalogue · March 2017 · printed p. 84. Historical context is not current availability or fitment approval.

Hub assembly

K08-231-9B

Catalogue context: 7K axle, 8-6.50 BC, studded, ⁹⁄₁₆"-18, 2.25 seal, E-Z Lube grease cap, 4.75 pilot diameter.

Seal listed10 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
8	006-053-00	Nut, Cone 60-deg
1	006-190-00	Nut, Retainer
1	006-191-00	Nut, Hex
1	008-231-18	Hub, 7K, 865, ⁹⁄₁₆"-18, Cupped & Studded
1	010-036-00	Seal, 2.25 ID
1	021-043-01	Grease Cap
1	031-017-02	Bearing Cone (14125A)
1	031-030-02	Bearing Cone (25580)
1	059-831-00	Instruction Sheet
1	085-001-00	Rubber Plug

“Cupped” or “with cups” describes the supplied hub. A separate cup part number has not been invented when the source does not list one.

Dexter Parts Kit Catalogue · March 2017 · printed p. 86. Historical context is not current availability or fitment approval.

Hub assembly

K08-248-90

Catalogue context: 3.5K idler axle, 5-4.50 BC, studded ¹⁄₂"-20, 1.718 seal, standard grease cap.

Seal listed7 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
5	006-080-00	Nut, Cone 60-deg
1	008-248-05	Hub, 3.5K, 545, Cupped & Studded
1	010-019-00	Seal, Grease 1.72 ID
1	021-003-00	Grease Cap
1	031-031-02	Bearing Cone (L44649)
1	031-033-02	Bearing Cone (L68149)
1	059-831-00	Instruction Sheet

“Cupped” or “with cups” describes the supplied hub. A separate cup part number has not been invented when the source does not list one.

Dexter Parts Kit Catalogue · March 2017 · printed p. 77. Historical context is not current availability or fitment approval.

Hub assembly

K08-248-92

Catalogue context: 3.5K idler axle, 5-4.75 BC, studded ¹⁄₂"-20, 1.718 seal, standard grease cap.

Seal listed7 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
5	006-080-00	Nut, Cone 60-deg
1	008-248-10	Hub, 3.5K, 5475, Cupped & Studded
1	010-019-00	Seal, Grease 1.72 ID
1	021-003-00	Grease Cap
1	031-031-02	Bearing Cone (L44649)
1	031-033-02	Bearing Cone (L68149)
1	059-831-00	Instruction Sheet

“Cupped” or “with cups” describes the supplied hub. A separate cup part number has not been invented when the source does not list one.

Dexter Parts Kit Catalogue · March 2017 · printed p. 78. Historical context is not current availability or fitment approval.

Hub assembly

K08-248-95

Catalogue context: 3.5K axle, 5-4.50 BC, studded ¹⁄₂"-20, 1.718 seal, E-Z Lube grease cap.

Seal listed10 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
5	006-080-00	Nut, Cone 60-deg
1	006-190-00	Nut, Retainer
1	006-191-00	Nut, Hex
1	008-248-05	Hub, 3.5K, 545, Cupped & Studded
1	010-019-00	Seal, Grease 1.72 ID
1	021-041-01	Grease Cap
1	031-031-02	Bearing Cone (L44649)
1	031-033-02	Bearing Cone (L68149)
1	059-831-00	Instruction Sheet
1	085-001-00	Rubber Plug

“Cupped” or “with cups” describes the supplied hub. A separate cup part number has not been invented when the source does not list one.

Dexter Parts Kit Catalogue · March 2017 · printed p. 77. Historical context is not current availability or fitment approval.

Hub assembly

K08-248-96

Catalogue context: 3.5K axle, 5-4.50 BC, studded ¹⁄₂"-20, 1.718 seal, ecoat, E-Z Lube grease cap.

Seal listed10 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
5	006-080-00	Nut, Cone 60-deg
1	006-190-00	Nut, Retainer
1	006-191-00	Nut, Hex
1	008-248-19	Hub, 3.5K, 545, E-Coat, Cupped & Studded
1	010-019-00	Seal, Grease 1.72 ID
1	021-041-01	Grease Cap
1	031-031-02	Bearing Cone (L44649)
1	031-033-02	Bearing Cone (L68149)
1	059-831-00	Instruction Sheet
1	085-001-00	Rubber Plug

“Cupped” or “with cups” describes the supplied hub. A separate cup part number has not been invented when the source does not list one.

Dexter Parts Kit Catalogue · March 2017 · printed p. 77. Historical context is not current availability or fitment approval.

Hub assembly

K08-248-9D

Catalogue context: 3.5K axle, 5-4.50 BC, studded ¹⁄₂"-20, 1.718 seal, ecoat, standard grease cap, with grease seal and cap only.

Seal listed5 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
5	006-080-00	Nut, Cone 60-deg
1	008-248-05	Hub, 3.5K, 545, Cupped & Studded
1	010-019-00	Seal, Grease 1.72 ID
1	021-003-00	Grease Cap
1	059-831-00	Instruction Sheet

“Cupped” or “with cups” describes the supplied hub. A separate cup part number has not been invented when the source does not list one.

Dexter Parts Kit Catalogue · March 2017 · printed p. 77. Historical context is not current availability or fitment approval.

Hub assembly

K08-251-90

Catalogue context: 3.5K idler axle, 6-5.50 BC, studded ¹⁄₂"-20, 1.718 seal, standard grease cap.

Seal listed7 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
6	006-080-00	Nut, Cone 60-deg
1	008-251-05	Hub, 3.5K 655, Cupped & Studded
1	010-019-00	Seal, Grease 1.72 ID
1	021-003-00	Grease Cap
1	031-031-02	Bearing Cone (L44649)
1	031-033-02	Bearing Cone (L68149)
1	059-831-00	Instruction Sheet

“Cupped” or “with cups” describes the supplied hub. A separate cup part number has not been invented when the source does not list one.

Dexter Parts Kit Catalogue · March 2017 · printed p. 79. Historical context is not current availability or fitment approval.

Hub assembly

K08-256-90

Catalogue context: 3.5K idler axle, 5-5.50 BC, studded ¹⁄₂"-20, 1.718 seal, standard grease cap.

Seal listed7 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
5	006-080-00	Nut, Cone 60-deg
1	008-256-05	Hub, 3.5K, 550, Cupped & Studded
1	010-019-00	Seal, Grease 1.72 ID
1	021-003-00	Grease Cap
1	031-031-02	Bearing Cone (L44649)
1	031-033-02	Bearing Cone (L68149)
1	059-831-00	Instruction Sheet

“Cupped” or “with cups” describes the supplied hub. A separate cup part number has not been invented when the source does not list one.

Dexter Parts Kit Catalogue · March 2017 · printed p. 79. Historical context is not current availability or fitment approval.

Hub assembly

K08-256-91

Catalogue context: 3.5K idler axle, 5-5.00 BC, studded ¹⁄₂"-20, 1.718 seal, standard grease cap.

Seal listed7 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
5	006-080-00	Nut, Cone 60-deg
1	008-256-07	Hub, 3.5K, 550, Cupped & Studded
1	010-019-00	Seal, Grease 1.72 ID
1	021-003-00	Grease Cap
1	031-031-02	Bearing Cone (L44649)
1	031-033-02	Bearing Cone (L68149)
1	059-831-00	Instruction Sheet

“Cupped” or “with cups” describes the supplied hub. A separate cup part number has not been invented when the source does not list one.

Dexter Parts Kit Catalogue · March 2017 · printed p. 80. Historical context is not current availability or fitment approval.

Hub assembly

K08-258-91

Catalogue context: 2K axle, 5-4.50 BC, studded ¹⁄₂"-20, seal, standard grease cap, for 13"-15" wheels only.

Seal listed6 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
5	006-080-00	Nut, Cone 60-deg
1	008-258-05	Hub, 2.2K, 545, 6.50" Dia. Hub Face, Cupped & Studded
1	010-009-00	Seal, Grease 1.50 ID
1	021-003-00	Grease Cap
2	031-031-02	Bearing Cone (L44649)
1	059-831-00	Instruction Sheet

“Cupped” or “with cups” describes the supplied hub. A separate cup part number has not been invented when the source does not list one.

Dexter Parts Kit Catalogue · March 2017 · printed p. 75. Historical context is not current availability or fitment approval.

Hub assembly

K08-258-92

Catalogue context: 2K axle, 5-4.50 BC, studded ¹⁄₂"-20, seal, ecoat, E-Z Lube grease cap, for 13"-15" wheels only.

Seal listed9 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
5	006-080-00	Nut, Cone 60-deg
1	006-190-00	Nut, Retainer
1	006-191-00	Nut, Hex
1	008-258-10	Hub, 2.2K, 545, 6.50" Dia. Hub Face, E-Coat, Cupped & Studded
1	010-060-00	Seal, Oil 1.50 ID
1	021-041-01	Grease Cap
1	031-031-02	Bearing Cone (L44649)
1	059-831-00	Instruction Sheet
1	085-001-00	Rubber Plug

“Cupped” or “with cups” describes the supplied hub. A separate cup part number has not been invented when the source does not list one.

Dexter Parts Kit Catalogue · March 2017 · printed p. 75. Historical context is not current availability or fitment approval.

Hub assembly

K08-259-91

Catalogue context: 2K axle, 5-4.50 BC, studded ¹⁄₂"-20, seal, standard grease cap, for 8"-12" wheels only.

Seal listed6 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
5	006-080-00	Nut, Cone 60-deg
1	008-259-05	Hub, 2.2K, 545, 5.50" Dia. Hub Face, Cupped & Studded
1	010-009-00	Seal, Grease 1.50 ID
1	021-003-00	Grease Cap
2	031-031-02	Bearing Cone (L44649)
1	059-831-00	Instruction Sheet

“Cupped” or “with cups” describes the supplied hub. A separate cup part number has not been invented when the source does not list one.

Dexter Parts Kit Catalogue · March 2017 · printed p. 75. Historical context is not current availability or fitment approval.

Hub assembly

K08-259-92

Catalogue context: 2K axle; 5-4.50 BC, studded ¹⁄₂"-20, seal, ecoat, E-Z Lube grease cap, for 8"-12" wheels only.

Seal listed9 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
5	006-080-00	Nut, Cone 60-deg
1	006-190-00	Nut, Retainer
1	006-191-00	Nut, Hex
1	008-259-10	Hub, 2.2K, 545, 5.50" Dia. Hub Face, E-Coat, Cupped & Studded
1	010-060-00	Seal, Oil 1.50 ID
1	021-041-01	Grease Cap
1	031-031-02	Bearing Cone (L44649)
1	059-831-00	Instruction Sheet
1	085-001-00	Rubber Plug

“Cupped” or “with cups” describes the supplied hub. A separate cup part number has not been invented when the source does not list one.

Dexter Parts Kit Catalogue · March 2017 · printed p. 75. Historical context is not current availability or fitment approval.

Hub assembly

K08-287-97

Catalogue context: 8K idler axle, 8-6.50 BC, studded ⁹⁄₁₆"-18, seal, E-Z Lube grease cap, 4.75 pilot diameter.

Seal listed10 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
8	006-053-00	Nut, Cone 60-deg
1	006-190-00	Nut, Retainer
1	006-191-00	Nut, Hex
1	008-287-11	Hub, 8K, 865, ⁹⁄₁₆"-18, Grease, Cupped & Studded
1	010-036-00	Seal, 2.25 ID
1	021-043-01	Grease Cap
1	031-028-02	Bearing Cone (02475)
1	031-030-02	Bearing Cone (25580)
1	059-831-00	Instruction Sheet
1	085-001-00	Rubber Plug

“Cupped” or “with cups” describes the supplied hub. A separate cup part number has not been invented when the source does not list one.

Dexter Parts Kit Catalogue · March 2017 · printed p. 90. Historical context is not current availability or fitment approval.

Hub assembly

K08-287-9A

Catalogue context: 8K idler axle, 8-6.50 BC, studded ⁵⁄₈"-18, seal, grease cap, 4.75 pilot diameter.

Seal listed7 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
8	006-109-00	Nut, Cone 90-deg
1	008-287-07	Hub, 8K, 865 ⁵⁄₈"-18, Grease, Cupped & Studded
1	010-036-00	Seal, 2.25 ID
1	021-039-00	Grease Cap
1	031-028-02	Bearing Cone (02475)
1	031-030-02	Bearing Cone (25580)
1	059-831-00	Instruction Sheet

“Cupped” or “with cups” describes the supplied hub. A separate cup part number has not been invented when the source does not list one.

Dexter Parts Kit Catalogue · March 2017 · printed p. 89. Historical context is not current availability or fitment approval.

Hub assembly

K08-287-9B

Catalogue context: 8K idler axle, 8-6.50 BC, studded ⁵⁄₈"-18, seal, E-Z Lube grease cap, 4.75 pilot diameter.

Seal listed10 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
8	006-109-00	Nut, Cone 90-deg
1	006-190-00	Nut, Retainer
1	006-191-00	Nut, Hex
1	008-287-10	Hub, 8K, 865, ⁵⁄₈"-18 Long Stud, Grease, Cupped & Studded
1	010-036-00	Seal, 2.25 ID
1	021-043-01	Grease Cap
1	031-028-02	Bearing Cone (02475)
1	031-030-02	Bearing Cone (25580)
1	059-831-00	Instruction Sheet
1	085-001-00	Rubber Plug

“Cupped” or “with cups” describes the supplied hub. A separate cup part number has not been invented when the source does not list one.

Dexter Parts Kit Catalogue · March 2017 · printed p. 89. Historical context is not current availability or fitment approval.

Hub assembly

K08-288-91

Catalogue context: 9K-10K GD axle, 8-6.50 BC, studded ⁵⁄₈"-18, oil seal, inner bearing, outer bearing, oil cap and wheel clamp ring (prior to 7/27/09).

Seal listed10 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
8	006-109-00	Nut, Cone 90-deg
1	008-288-03	Hub, 9K-10K GD, 865, 4.75 Pilot, Cupped & Studded
1	010-050-00	O-Ring
1	010-051-02	Seal, Oil 2.875 ID
1	021-036-00	Oil Cap
1	031-019-02	Bearing Cone (387A)
1	031-030-02	Bearing Cone (25580)
1	033-052-01	Clamp Ring
1	046-032-00	Rubber Plug
1	059-831-00	Instruction Sheet

“Cupped” or “with cups” describes the supplied hub. A separate cup part number has not been invented when the source does not list one.

Dexter Parts Kit Catalogue · March 2017 · printed p. 91. Historical context is not current availability or fitment approval.

Hub assembly

K08-290-90

Catalogue context: D200 axle, outboard drum mount (no drum), 10-285.75 BC, studded 22mm, oil seal, grease cap, 8.78" pilot diameter.

Seal listed13 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
1	005-098-00	Washer, Perf, 2⁵⁄₈" .250
1	005-099-00	Washer, Tang
6	005-100-00	Washer, Lock
1	006-114-00	Nut, Octagon 2⁵⁄₈"-16 Gr 2
1	006-115-00	Nut, Octagon Jam 2⁵⁄₈"-16 Gr 2
10	006-118-00	Nut, Flange
6	007-157-00	Screw, Hex
1	008-290-13	Hub, D200, 10-285.75, 22mm Stud, 8.78 Pilot, Cupped & Studded
1	010-055-04	Seal, Oil 4.625 ID
1	021-046-00	Grease Cap
1	031-026-02	Bearing Cone (HM218248)
1	031-027-02	Bearing Cone (HM212049)
1	071-124-00	Oil Cap Gasket

“Cupped” or “with cups” describes the supplied hub. A separate cup part number has not been invented when the source does not list one.

Dexter Parts Kit Catalogue · March 2017 · printed p. 91. Historical context is not current availability or fitment approval.

Hub assembly

K08-399-90

Catalogue context: 8K disc brake axle, 8-6.50 BC, studded ⁹⁄₁₆"-18, seal, oil cap, 4.75 pilot diameter.

Seal listed9 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
8	006-053-00	Nut, Cone 60-deg
1	008-399-06	Hub, 8K, 865, Disc Brake, ⁹⁄₁₆"-18, Oil, Cupped & Studded
1	010-036-00	Seal, 2.25 ID
1	010-045-00	O-Ring
1	021-035-01	Oil Cap, Black
1	031-028-02	Bearing Cone (02475)
1	031-030-02	Bearing Cone (25580)
1	046-032-00	Rubber Plug
1	059-831-00	Instruction Sheet

“Cupped” or “with cups” describes the supplied hub. A separate cup part number has not been invented when the source does not list one.

Dexter Parts Kit Catalogue · March 2017 · printed p. 90. Historical context is not current availability or fitment approval.

Hub assembly

K08-399-91

Catalogue context: 8K disc brake axle, 8-6.50 BC, studded ⁵⁄₈"-18, seal, oil cap, 4.75 pilot diameter.

Seal listed9 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
8	006-058-00	Nut, Flange
1	008-399-08	Hub, 8K, 865, Disc Brake, ⁵⁄₈"-18, Oil, Cupped & Studded
1	010-036-00	Seal, 2.25 ID
1	010-045-00	O-Ring
1	021-035-01	Oil Cap, Black
1	031-028-02	Bearing Cone (02475)
1	031-030-02	Bearing Cone (25580)
1	046-032-00	Rubber Plug
1	059-831-00	Instruction Sheet

“Cupped” or “with cups” describes the supplied hub. A separate cup part number has not been invented when the source does not list one.

Dexter Parts Kit Catalogue · March 2017 · printed p. 89. Historical context is not current availability or fitment approval.

Hub-drum assembly

K08-201-90

Catalogue context: 5.2K axle, 6-5.50 BC, studded ¹⁄₂"-20, 2.125 seal, standard grease cap.

Seal listed7 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
6	006-080-00	Nut, Cone 60-deg
1	008-201-05	Hub-Drum, 5.2K, 655, LM67010 Outer, Cupped & Studded
1	010-010-00	Seal, Oil 2.125 ID
1	021-001-00	Grease Cap
1	031-030-02	Bearing Cone (25580)
1	031-032-02	Bearing Cone (LM67048)
1	059-831-00	Instruction Sheet

“Cupped” or “with cups” describes the supplied hub. A separate cup part number has not been invented when the source does not list one.

Dexter Parts Kit Catalogue · March 2017 · printed p. 81. Historical context is not current availability or fitment approval.

Hub-drum assembly

K08-201-91

Catalogue context: 6K axle, 6-5.50 BC, studded ¹⁄₂"-20, 2.125 seal, standard grease cap.

Seal listed7 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
6	006-080-00	Nut, Cone 60-deg
1	008-201-09	Hub-Drum, 6K,15245 Outer, Cupped & Studded
1	010-010-00	Seal, Oil 2.125 ID
1	021-001-00	Grease Cap
1	031-029-02	Bearing Cone (15123)
1	031-030-02	Bearing Cone (25580)
1	059-831-00	Instruction Sheet

“Cupped” or “with cups” describes the supplied hub. A separate cup part number has not been invented when the source does not list one.

Dexter Parts Kit Catalogue · March 2017 · printed p. 83. Historical context is not current availability or fitment approval.

Hub-drum assembly

K08-201-94

Catalogue context: 5.2K axle, 6-5.50 BC, studded ¹⁄₂"-20, 2.125 seal, E-Z Lube grease cap.

Seal listed10 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
6	006-080-00	Nut, Cone 60-deg
1	006-190-00	Nut, Retainer
1	006-191-00	Nut, Hex
1	008-201-05	Hub-Drum, 5.2K, 655, LM67010 Outer, Cupped & Studded
1	010-010-00	Seal, Oil 2.125 ID
1	021-042-01	Grease Cap
1	031-030-02	Bearing Cone (25580)
1	031-032-02	Bearing Cone (LM67048)
1	059-831-00	Instruction Sheet
1	085-001-00	Rubber Plug

“Cupped” or “with cups” describes the supplied hub. A separate cup part number has not been invented when the source does not list one.

Dexter Parts Kit Catalogue · March 2017 · printed p. 81. Historical context is not current availability or fitment approval.

Hub-drum assembly

K08-201-95

Catalogue context: 6K axle, 6-5.50 BC, studded ¹⁄₂"-20, 2.125 seal, E-Z Lube grease cap.

Seal listed10 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
6	006-080-00	Nut, Cone 60-deg
1	006-190-00	Nut, Retainer
1	006-191-00	Nut, Hex
1	008-201-09	Hub-Drum, 6K,15245 Outer, Cupped & Studded
1	010-010-00	Seal, Oil 2.125 ID
1	021-042-01	Grease Cap
1	031-029-02	Bearing Cone (15123)
1	031-030-02	Bearing Cone (25580)
1	059-831-00	Instruction Sheet
1	085-001-00	Rubber Plug

“Cupped” or “with cups” describes the supplied hub. A separate cup part number has not been invented when the source does not list one.

Dexter Parts Kit Catalogue · March 2017 · printed p. 83. Historical context is not current availability or fitment approval.

Hub-drum assembly

K08-201-97

Catalogue context: 5.2K axle, 6-5.50 BC, studded ¹⁄₂"-20, 2.25 seal, standard grease cap.

Seal listed7 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
6	006-080-00	Nut, Cone 60-deg
1	008-201-05	Hub-Drum, 5.2K, 655, LM67010 Outer, Cupped & Studded
1	010-036-00	Seal, 2.25 ID
1	021-001-00	Grease Cap
1	031-030-02	Bearing Cone (25580)
1	031-032-02	Bearing Cone (LM67048)
1	059-831-00	Instruction Sheet

“Cupped” or “with cups” describes the supplied hub. A separate cup part number has not been invented when the source does not list one.

Dexter Parts Kit Catalogue · March 2017 · printed p. 82. Historical context is not current availability or fitment approval.

Hub-drum assembly

K08-201-98

Catalogue context: 5.2K axle, 6-5.50 BC, studded ¹⁄₂"-20, 2.25 seal, E-Z Lube grease cap.

Seal listed10 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
6	006-080-00	Nut, Cone 60-deg
1	006-190-00	Nut, Retainer
1	006-191-00	Nut, Hex
1	008-201-05	Hub-Drum, 5.2K, 655, LM67010 Outer, Cupped & Studded
1	010-036-00	Seal, 2.25 ID
1	021-042-01	Grease Cap
1	031-030-02	Bearing Cone (25580)
1	031-032-02	Bearing Cone (LM67048)
1	059-831-00	Instruction Sheet
1	085-001-00	Rubber Plug

“Cupped” or “with cups” describes the supplied hub. A separate cup part number has not been invented when the source does not list one.

Dexter Parts Kit Catalogue · March 2017 · printed p. 82. Historical context is not current availability or fitment approval.

Hub-drum assembly

K08-201-9A

Catalogue context: 6K axle, 6-5.50 BC, studded ¹⁄₂"-20, 2.25 seal, standard grease cap.

Seal listed7 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
6	006-080-00	Nut, Cone 60-deg
1	008-201-09	Hub-Drum, 6K,15245 Outer, Cupped & Studded
1	010-036-00	Seal, 2.25 ID
1	021-001-00	Grease Cap
1	031-029-02	Bearing Cone (15123)
1	031-030-02	Bearing Cone (25580)
1	059-831-00	Instruction Sheet

“Cupped” or “with cups” describes the supplied hub. A separate cup part number has not been invented when the source does not list one.

Dexter Parts Kit Catalogue · March 2017 · printed p. 83. Historical context is not current availability or fitment approval.

Hub-drum assembly

K08-219-90

Catalogue context: 7K axle, 8-6.50 BC, studded ¹⁄₂"-20, 2.125 seal, standard grease cap.

Seal listed7 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
8	006-080-00	Nut, Cone 60-deg
1	008-219-04	Hub-Drum, 7K, 865, ¹⁄₂"-20, Cupped & Studded
1	010-010-00	Seal, Oil 2.125 ID
1	021-039-00	Grease Cap
1	031-017-02	Bearing Cone (14125A)
1	031-030-02	Bearing Cone (25580)
1	059-831-00	Instruction Sheet

“Cupped” or “with cups” describes the supplied hub. A separate cup part number has not been invented when the source does not list one.

Dexter Parts Kit Catalogue · March 2017 · printed p. 84. Historical context is not current availability or fitment approval.

Hub-drum assembly

K08-219-91

Catalogue context: 7K axle, 8-6.50 BC, studded ⁹⁄₁₆"-18, 2.125 seal, standard grease cap.

Seal listed7 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
8	006-053-00	Nut, Cone 60-deg
1	008-219-13	Hub-Drum, 7K, 865, ⁹⁄₁₆"-18, Cupped & Studded
1	010-010-00	Seal, Oil 2.125 ID
1	021-039-00	Grease Cap
1	031-017-02	Bearing Cone (14125A)
1	031-030-02	Bearing Cone (25580)
1	059-831-00	Instruction Sheet

“Cupped” or “with cups” describes the supplied hub. A separate cup part number has not been invented when the source does not list one.

Dexter Parts Kit Catalogue · March 2017 · printed p. 84. Historical context is not current availability or fitment approval.

Hub-drum assembly

K08-219-96

Catalogue context: 7K axle, 8-6.50 BC, studded ¹⁄₂"-20, 2.125 seal, E-Z Lube grease cap.

Seal listed10 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
8	006-080-00	Nut, Cone 60-deg
1	006-190-00	Nut, Retainer
1	006-191-00	Nut, Hex
1	008-219-04	Hub-Drum, 7K, 865, ¹⁄₂"-20, Cupped & Studded
1	010-010-00	Seal, Oil 2.125 ID
1	021-043-01	Grease Cap
1	031-017-02	Bearing Cone (14125A)
1	031-030-02	Bearing Cone (25580)
1	059-831-00	Instruction Sheet
1	085-001-00	Rubber Plug

“Cupped” or “with cups” describes the supplied hub. A separate cup part number has not been invented when the source does not list one.

Dexter Parts Kit Catalogue · March 2017 · printed p. 85. Historical context is not current availability or fitment approval.

Hub-drum assembly

K08-219-9B

Catalogue context: 7K axle, 8-6.50 BC, studded, ¹⁄₂"-20, 2.25 seal, E-Z Lube grease cap, 4.75 pilot diameter.

Seal listed10 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
8	006-080-00	Nut, Cone 60-deg
1	006-190-00	Nut, Retainer
1	006-191-00	Nut, Hex
1	008-219-04	Hub-Drum, 7K, 865, ¹⁄₂"-20, Cupped & Studded
1	010-036-00	Seal, 2.25 ID
1	021-043-01	Grease Cap
1	031-017-02	Bearing Cone Outer (14125A)
1	031-030-02	Bearing Cone Inner (25580)
1	059-831-00	Instruction Sheet
1	085-001-00	Rubber Plug

“Cupped” or “with cups” describes the supplied hub. A separate cup part number has not been invented when the source does not list one.

Dexter Parts Kit Catalogue · March 2017 · printed p. 85. Historical context is not current availability or fitment approval.

Hub-drum assembly

K08-219-9C

Catalogue context: 7K axle, 8-6.50 BC, studded ⁹⁄₁₆"-18, 2.25 seal, E-Z Lube grease cap.

Seal listed10 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
8	006-053-00	Nut, Cone 60-deg
1	006-190-00	Nut, Retainer
1	006-191-00	Nut, Hex
1	008-219-13	Hub-Drum, 7K, 865, ⁹⁄₁₆"-18, Cupped & Studded
1	010-036-00	Seal, 2.25 ID
1	021-043-01	Grease Cap
1	031-017-02	Bearing Cone (14125A)
1	031-030-02	Bearing Cone (25580)
1	059-831-00	Instruction Sheet
1	085-001-00	Rubber Plug

“Cupped” or “with cups” describes the supplied hub. A separate cup part number has not been invented when the source does not list one.

Dexter Parts Kit Catalogue · March 2017 · printed p. 85. Historical context is not current availability or fitment approval.

Hub-drum assembly

K08-219-9D

Catalogue context: 7K axle, 8-6.50 BC, studded ¹⁄₂"-20, 2.25 seal, standard grease cap.

Seal listed7 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
8	006-080-00	Nut, Cone 60-deg
1	008-219-04	Hub-Drum, 7K, 865, ¹⁄₂"-20, Cupped & Studded
1	010-036-00	Seal, 2.25 ID
1	021-039-00	Grease Cap
1	031-017-02	Bearing Cone (14125A)
1	031-030-02	Bearing Cone (25580)
1	059-831-00	Instruction Sheet

“Cupped” or “with cups” describes the supplied hub. A separate cup part number has not been invented when the source does not list one.

Dexter Parts Kit Catalogue · March 2017 · printed p. 85. Historical context is not current availability or fitment approval.

Hub-drum assembly

K08-247-90

Catalogue context: 3.5K axle, 5-4.50 BC studded ¹⁄₂"-20, 1.718 seal, standard grease cap.

Seal listed7 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
5	006-080-00	Nut, Cone 60-deg
1	008-247-05	Hub-Drum, 3.5K, 545, Cupped & Studded
1	010-019-00	Seal, Grease 1.72 ID
1	021-003-00	Grease Cap
1	031-031-02	Bearing Cone (L44649)
1	031-033-02	Bearing Cone (L68149)
1	059-831-00	Instruction Sheet

“Cupped” or “with cups” describes the supplied hub. A separate cup part number has not been invented when the source does not list one.

Dexter Parts Kit Catalogue · March 2017 · printed p. 76. Historical context is not current availability or fitment approval.

Hub-drum assembly

K08-247-93

Catalogue context: 3.5K axle, 5-4.75 BC, studded ¹⁄₂"-20, 1.718 seal, standard grease cap.

Seal listed7 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
5	006-080-00	Nut, Cone 60-deg
1	008-247-12	Hub-Drum, 3.5K, 5475, Cupped & Studded
1	010-019-00	Seal, Grease 1.72 ID
1	021-003-00	Grease Cap
1	031-031-02	Bearing Cone (L44649)
1	031-033-02	Bearing Cone (L68149)
1	059-831-00	Instruction Sheet

“Cupped” or “with cups” describes the supplied hub. A separate cup part number has not been invented when the source does not list one.

Dexter Parts Kit Catalogue · March 2017 · printed p. 78. Historical context is not current availability or fitment approval.

Hub-drum assembly

K08-247-94

Catalogue context: 3.5K axle, 5-4.50 BC, studded ¹⁄₂"-20, 1.718 seal, E-Z Lube grease cap.

Seal listed10 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
5	006-080-00	Nut, Cone 60-deg
1	006-190-00	Nut, Retainer
1	006-191-00	Nut, Hex
1	008-247-05	Hub-Drum, 3.5K, 545, Cupped & Studded
1	010-019-00	Seal, Grease 1.72 ID
1	021-041-01	Grease Cap
1	031-031-02	Bearing Cone (L44649)
1	031-033-02	Bearing Cone (L68149)
1	059-831-00	Instruction Sheet
1	085-001-00	Rubber Plug

“Cupped” or “with cups” describes the supplied hub. A separate cup part number has not been invented when the source does not list one.

Dexter Parts Kit Catalogue · March 2017 · printed p. 76. Historical context is not current availability or fitment approval.

Hub-drum assembly

K08-249-90

Catalogue context: 3.5K axle, 5-5.50 BC, studded ¹⁄₂"-20, 1.718 seal, standard grease cap.

Seal listed7 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
5	006-080-00	Nut, Cone 60-deg
1	008-249-05	Hub-Drum, 3.5K, 555, Cupped & Studded
1	010-019-00	Seal, Grease 1.72 ID
1	021-003-00	Grease Cap
1	031-031-02	Bearing Cone (L44649)
1	031-033-02	Bearing Cone (L68149)
1	059-831-00	Instruction Sheet

“Cupped” or “with cups” describes the supplied hub. A separate cup part number has not been invented when the source does not list one.

Dexter Parts Kit Catalogue · March 2017 · printed p. 78. Historical context is not current availability or fitment approval.

Hub-drum assembly

K08-249-91

Catalogue context: 3.5K axle, 5-5.00 BC, studded ¹⁄₂"-20, 1.718 seal, standard grease cap.

Seal listed7 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
5	006-080-00	Nut, Cone 60-deg
1	008-249-07	Hub-Drum, 3.5K, 550, Cupped & Studded
1	010-019-00	Seal, Grease 1.72 ID
1	021-003-00	Grease Cap
1	031-031-02	Bearing Cone (L44649)
1	031-033-02	Bearing Cone (L68149)
1	059-831-00	Instruction Sheet

“Cupped” or “with cups” describes the supplied hub. A separate cup part number has not been invented when the source does not list one.

Dexter Parts Kit Catalogue · March 2017 · printed p. 78. Historical context is not current availability or fitment approval.

Hub-drum assembly

K08-250-90

Catalogue context: 3.5K axle, 6-5.50 BC, studded ¹⁄₂"-20, 1.718 seal, standard grease cap.

Seal listed7 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
6	006-080-00	Nut, Cone 60-deg
1	008-250-05	Hub-Drum, 3.5K, 655, Cupped & Studded
1	010-019-00	Seal, Grease 1.72
1	021-003-00	Grease Cap
1	031-031-02	Bearing Cone (L44649)
1	031-033-02	Bearing Cone (L68149)
1	059-831-00	Instruction Sheet

“Cupped” or “with cups” describes the supplied hub. A separate cup part number has not been invented when the source does not list one.

Dexter Parts Kit Catalogue · March 2017 · printed p. 79. Historical context is not current availability or fitment approval.

Hub-drum assembly

K08-250-91

Catalogue context: 3.5K axle, 6-5.50 BC, studded ¹⁄₂"-20, 1.718 seal, E-Z Lube grease cap.

Seal listed10 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
6	006-080-00	Nut, Cone 60-deg
1	006-190-00	Nut, Retainer
1	006-191-00	Nut, Hex
1	008-250-05	Hub-Drum, 3.5K, 655, Cupped & Studded
1	010-019-00	Seal, Grease 1.72 ID
1	021-041-01	Grease Cap
1	031-031-02	Bearing Cone (L44649)
1	031-033-02	Bearing Cone (L68149)
1	059-831-00	Instruction Sheet
1	085-001-00	Rubber Plug

“Cupped” or “with cups” describes the supplied hub. A separate cup part number has not been invented when the source does not list one.

Dexter Parts Kit Catalogue · March 2017 · printed p. 79. Historical context is not current availability or fitment approval.

Hub-drum assembly

K08-257-90

Catalogue context: 2K axle, 5-4.50 BC, studded ¹⁄₂"-20, seal, standard grease cap.

Seal listed6 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
5	007-040-00	Bolt, 60-deg
1	008-257-04	Hub-Drum, 2.2K, 545, 7" Electric Brake, Tapped w/Cups
1	010-009-00	Seal, Grease 1.50 ID
1	021-003-00	Grease Cap
2	031-031-02	Bearing Cone (L44649)
1	059-831-00	Instruction Sheet

“Cupped” or “with cups” describes the supplied hub. A separate cup part number has not been invented when the source does not list one.

Dexter Parts Kit Catalogue · March 2017 · printed p. 74. Historical context is not current availability or fitment approval.

Hub-drum assembly

K08-257-91

Catalogue context: 2K electric brake axle, 5-4.50 BC, studded ¹⁄₂"-20, seal, standard grease cap.

Seal listed6 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
5	006-080-00	Nut, Cone 60-deg
1	008-257-05	Hub-Drum, 2.2K, 545, 7" Electric Brake, Cupped & Studded
1	010-009-00	Seal, Grease 1.50 ID
1	021-003-00	Grease Cap
2	031-031-02	Bearing Cone (L44649)
1	059-831-00	Instruction Sheet

“Cupped” or “with cups” describes the supplied hub. A separate cup part number has not been invented when the source does not list one.

Dexter Parts Kit Catalogue · March 2017 · printed p. 74. Historical context is not current availability or fitment approval.

Hub-drum assembly

K08-285-90

Catalogue context: 8K axle, 8-6.50 BC, studded ⁵⁄₈"-18, oil seal, oil cap, 4.75 pilot diameter.

Seal listed9 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
8	006-109-00	Nut, Cone 90-deg
1	008-285-10	Hub-Drum, 8K, 865, ⁵⁄₈"-18, Oil, Cupped & Studded
1	010-045-00	O-Ring
1	010-063-00	Seal, Oil 2.25 ID
1	021-035-00	Oil Cap
1	031-028-02	Bearing Cone (02475)
1	031-030-02	Bearing Cone (25580)
1	046-032-00	Rubber Plug
1	059-831-00	Instruction Sheet

“Cupped” or “with cups” describes the supplied hub. A separate cup part number has not been invented when the source does not list one.

Dexter Parts Kit Catalogue · March 2017 · printed p. 87. Historical context is not current availability or fitment approval.

Hub-drum assembly

K08-285-92

Catalogue context: 8K axle, 8-6.50 BC, studded ⁹⁄₁₆"-18, oil seal, oil cap, 4.75 pilot diameter.

Seal listed9 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
8	006-053-00	Nut, Cone 60-deg
1	008-285-09	Hub-Drum, 8K, 865, ⁹⁄₁₆"-18, Oil, Cupped & Studded
1	010-045-00	O-Ring
1	010-063-00	Seal, Oil 2.25 ID
1	021-035-00	Oil Cap
1	031-028-02	Bearing Cone (02475)
1	031-030-02	Bearing Cone (25580)
1	046-032-00	Rubber Plug
1	059-831-00	Instruction Sheet

“Cupped” or “with cups” describes the supplied hub. A separate cup part number has not been invented when the source does not list one.

Dexter Parts Kit Catalogue · March 2017 · printed p. 88. Historical context is not current availability or fitment approval.

Hub-drum assembly

K08-285-93

Catalogue context: 8K axle, 8-6.50 BC, studded ⁵⁄₈"-18, oil seal, oil cap, 4.75 pilot diameter.

Seal listed9 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
8	006-058-00	Nut, Flange
1	008-285-10	Hub-Drum, 8K, 865, ⁵⁄₈"-18, Oil, Cupped & Studded
1	010-045-00	O-Ring
1	010-063-00	Seal, Oil 2.25 ID
1	021-035-00	Oil Cap
1	031-028-02	Bearing Cone (02475)
1	031-030-02	Bearing Cone (25580)
1	046-032-00	Rubber Plug
1	059-831-00	Instruction Sheet

“Cupped” or “with cups” describes the supplied hub. A separate cup part number has not been invented when the source does not list one.

Dexter Parts Kit Catalogue · March 2017 · printed p. 88. Historical context is not current availability or fitment approval.

Hub-drum assembly

K08-285-94

Catalogue context: 8K axle, 8-6.50 BC, studded ⁹⁄₁₆"-18, seal, standard grease cap, 4.75 pilot diameter.

Seal listed7 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
8	006-053-00	Nut, Cone 60-deg
1	008-285-11	Hub-Drum, 8K, 865, ⁹⁄₁₆"-18, Grease, Cupped & Studded
1	010-036-00	Seal, 2.25 ID
1	021-039-00	Grease Cap
1	031-028-02	Bearing Cone (02475)
1	031-030-02	Bearing Cone (25580)
1	059-831-00	Instruction Sheet

“Cupped” or “with cups” describes the supplied hub. A separate cup part number has not been invented when the source does not list one.

Dexter Parts Kit Catalogue · March 2017 · printed p. 88. Historical context is not current availability or fitment approval.

Hub-drum assembly

K08-285-95

Catalogue context: 8K axle, 8-6.50 BC, studded ⁹⁄₁₆"-18, seal, E-Z Lube grease cap, 4.75 pilot diameter.

Seal listed10 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
8	006-053-00	Nut, Cone 60-deg
1	006-190-00	Nut, Retainer
1	006-191-00	Nut, Hex
1	008-285-11	Hub-Drum, 8K, 865, ⁹⁄₁₆"-18, Grease, Cupped & Studded
1	010-036-00	Seal, 2.25 ID
1	021-043-01	Grease Cap
1	031-028-02	Bearing Cone (02475)
1	031-030-02	Bearing Cone (25580)
1	059-831-00	Instruction Sheet
1	085-001-00	Rubber Plug

“Cupped” or “with cups” describes the supplied hub. A separate cup part number has not been invented when the source does not list one.

Dexter Parts Kit Catalogue · March 2017 · printed p. 88. Historical context is not current availability or fitment approval.

Hub-drum assembly

K08-285-96

Catalogue context: 8K axle, 8-6.50 BC, studded ⁵⁄₈"-18, seal, E-Z Lube grease cap, 4.75 pilot diameter.

Seal listed10 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
8	006-109-00	Nut, Cone 90-deg
1	006-190-00	Nut, Retainer
1	006-191-00	Nut, Hex
1	008-285-08	Hub-Drum, 8K, 865, ⁵⁄₈"-18, Grease, Cupped & Studded
1	010-036-00	Seal, 2.25 ID
1	021-043-01	Grease Cap
1	031-028-02	Bearing Cone (02475)
1	031-030-02	Bearing Cone (25580)
1	059-831-00	Instruction Sheet
1	085-001-00	Rubber Plug

“Cupped” or “with cups” describes the supplied hub. A separate cup part number has not been invented when the source does not list one.

Dexter Parts Kit Catalogue · March 2017 · printed p. 89. Historical context is not current availability or fitment approval.

Hub-drum assembly

K08-285-97

Catalogue context: 8K axle, 8-6.50 BC, studded ⁵⁄₈"-18, seal, grease cap, 4.75 pilot diameter.

Seal listed7 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
8	006-058-00	Nut, Flange
1	008-285-08	Hub-Drum, 8K, 865, ⁵⁄₈"-18, Grease, Cupped & Studded
1	010-036-00	Seal, 2.25 ID
1	021-039-00	Grease Cap
1	031-028-02	Bearing Cone (02475)
1	031-030-02	Bearing Cone (25580)
1	059-831-00	Instruction Sheet

“Cupped” or “with cups” describes the supplied hub. A separate cup part number has not been invented when the source does not list one.

Dexter Parts Kit Catalogue · March 2017 · printed p. 86. Historical context is not current availability or fitment approval.

Hub-drum assembly

K08-285-9F

Catalogue context: 8K axle, 8-6.50 BC, studded ⁵⁄₈"-18, seal, oil cap, 4.75 pilot diameter.

Seal listed11 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
8	006-058-00	Nut, Flange
1	006-190-00	Nut, Retainer
1	006-191-00	Nut, Hex
1	008-285-10	Hub-Drum, 8K, 865, ⁵⁄₈"-18, Oil, Cupped & Studded
1	010-036-00	Seal, 2.25 ID
1	010-045-00	O-Ring
1	021-035-01	Oil Cap, Black
1	031-028-02	Bearing Cone (02475)
1	031-030-02	Bearing Cone (25580)
1	046-032-00	Rubber Plug
1	059-831-00	Instruction Sheet

“Cupped” or “with cups” describes the supplied hub. A separate cup part number has not been invented when the source does not list one.

Dexter Parts Kit Catalogue · March 2017 · printed p. 87. Historical context is not current availability or fitment approval.

Hub-drum assembly

K08-285-9G

Catalogue context: 8K axle, 8-6.50 BC, studded ⁵⁄₈"-18, seal, oil cap, 4.75 pilot diameter, ABS.

Seal listed11 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
8	006-058-00	Nut, Flange
1	006-190-00	Nut, Retainer
1	006-191-00	Nut, Hex
1	008-285-14	Hub-Drum, 8K, 865, ⁵⁄₈"-18, ABS, Oil, Cupped & Studded
1	010-036-00	Seal, 2.25 ID
1	010-045-00	O-Ring
1	021-035-01	Oil Cap, Black
1	031-028-02	Bearing Cone (02475)
1	031-030-02	Bearing Cone (25580)
1	046-032-00	Rubber Plug
1	059-831-00	Instruction Sheet

“Cupped” or “with cups” describes the supplied hub. A separate cup part number has not been invented when the source does not list one.

Dexter Parts Kit Catalogue · March 2017 · printed p. 87. Historical context is not current availability or fitment approval.

Hub-drum assembly

K08-288-90

Catalogue context: 9K-10K GD axle, 8-6.50 BC, studded ⁵⁄₈"-18, oil seal, inner bearing, outer bearing, oil cap and wheel clamp ring (prior to 7/27/09).

Seal listed10 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
8	006-109-00	Nut, Cone 90-deg
1	008-288-05	Hub & Drum, 9K-10K GD, 865, 4.75 Pilot, Cupped & Studded
1	010-050-00	O-Ring
1	010-051-02	Seal, Oil 2.875 ID
1	021-036-00	Oil Cap
1	031-019-02	Bearing Cone (387A)
1	031-030-02	Bearing Cone (25580)
1	033-052-01	Clamp Ring
1	046-032-00	Rubber Plug
1	059-831-00	Instruction Sheet

“Cupped” or “with cups” describes the supplied hub. A separate cup part number has not been invented when the source does not list one.

Dexter Parts Kit Catalogue · March 2017 · printed p. 90. Historical context is not current availability or fitment approval.

Hub-drum assembly

K08-393-90

Catalogue context: 7.2K axle, 8-6.50 BC, studded ⁹⁄₁₆"-18, seal, E-Z Lube grease cap, 4.75 pilot diameter.

Seal listed10 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
8	006-053-00	Nut, Cone 60-deg
1	006-190-00	Nut, Retainer
1	006-191-00	Nut, Hex
1	008-393-04	Hub-Drum, 7.2K, 865, ⁹⁄₁₆"-18, Grease, Cupped & Studded
1	010-036-00	Seal, 2.25 ID
1	021-043-01	Grease Cap
1	031-028-02	Bearing Cone (02475)
1	031-030-02	Bearing Cone (25580)
1	059-831-00	Instruction Sheet
1	085-001-00	Rubber Plug

“Cupped” or “with cups” describes the supplied hub. A separate cup part number has not been invented when the source does not list one.

Dexter Parts Kit Catalogue · March 2017 · printed p. 86. Historical context is not current availability or fitment approval.

Hub-drum assembly

K08-407-90

Catalogue context: 4.4K axle, 6-5.50 BC, studded ¹⁄₂"-20, 1.718 seal, E-Z Lube grease cap.

Seal listed14 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
1	005-023-00	Washer, "D"
6	006-080-00	Nut, Cone 60-deg
1	006-176-00	Nut, Slotted
1	006-190-00	Nut, Retainer
1	006-191-00	Nut, Hex
1	008-407-05	Hub-Drum, 4.4K, 655, Cupped & Studded
1	010-019-00	Seal, Grease 1.72 ID
1	019-002-00	Cotter Pin
1	021-001-00	Grease Cap
1	021-042-01	Grease Cap
1	031-032-02	Bearing Cone (LM67048)
1	031-033-02	Bearing Cone (L68149)
1	059-831-00	Instruction Sheet
1	085-001-00	Rubber Plug

“Cupped” or “with cups” describes the supplied hub. A separate cup part number has not been invented when the source does not list one.

Dexter Parts Kit Catalogue · March 2017 · printed p. 81. Historical context is not current availability or fitment approval.

Hub-drum assembly

K08-418-90

Catalogue context: 3K axle, 5-4.50 BC, studded ¹⁄₂"-20, 1.718 seal, standard grease cap.

Seal listed7 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
5	006-080-00	Nut, Cone 60-deg
1	008-418-02	Hub-Drum, 3K, 545, Cupped & Studded
1	010-019-00	Seal, Grease 1.72 ID
1	021-003-00	Grease Cap
1	031-031-02	Bearing Cone (L44649)
1	031-032-02	Bearing Cone (LM67048)
1	059-831-00	Instruction Sheet

“Cupped” or “with cups” describes the supplied hub. A separate cup part number has not been invented when the source does not list one.

Dexter Parts Kit Catalogue · March 2017 · printed p. 76. Historical context is not current availability or fitment approval.

Hub-drum assembly

K08-418-91

Catalogue context: 3K axle, 5-4.50 BC, studded ¹⁄₂"-20, 1.718 seal, E-Z Lube grease cap.

Seal listed10 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
5	006-080-00	Nut, Cone 60-deg
1	006-190-00	Nut, Retainer
1	006-191-00	Nut, Hex
1	008-418-02	Hub-Drum, 3K, 545, Cupped & Studded
1	010-019-00	Seal, Grease 1.72 ID
1	021-041-01	Grease Cap
1	031-031-02	Bearing Cone (L44649)
1	031-032-02	Bearing Cone (LM67048)
1	059-831-00	Instruction Sheet
1	085-001-00	Rubber Plug

“Cupped” or “with cups” describes the supplied hub. A separate cup part number has not been invented when the source does not list one.

Dexter Parts Kit Catalogue · March 2017 · printed p. 76. Historical context is not current availability or fitment approval.

Hub-drum assembly

K08-426-90

Catalogue context: 4K axle, 5-4.50 BC, studded ¹⁄₂"-20, 1.718 seal, standard grease cap.

Seal listed7 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
5	006-080-00	Nut, Cone 60-deg
1	008-426-05	Hub-Drum, 4K, 545, Cupped & Studded
1	010-019-00	Seal, Grease 1.72 ID
1	021-003-00	Grease Cap
1	031-031-02	Bearing Cone (L44649)
1	031-033-02	Bearing Cone (L68149)
1	059-831-00	Instruction Sheet

“Cupped” or “with cups” describes the supplied hub. A separate cup part number has not been invented when the source does not list one.

Dexter Parts Kit Catalogue · March 2017 · printed p. 80. Historical context is not current availability or fitment approval.

Hub-drum assembly

K08-426-91

Catalogue context: 4K axle, 5-4.50 BC, studded ¹⁄₂"-20, 1.718 seal, E-Z Lube grease cap.

Seal listed10 content rows

Inspect components and quantities ↓

Quantity per listed package — not a universal per-wheel requirement
Qty	Manufacturer part reference	Listed component / condition
5	006-080-00	Nut, Cone 60-deg
1	006-190-00	Nut, Retainer
1	006-191-00	Nut, Hex
1	008-426-05	Hub-Drum, 4K, 545, Cupped & Studded
1	010-019-00	Seal, Grease 1.72 ID
1	021-041-01	Grease Cap
1	031-031-02	Bearing Cone (L44649)
1	031-033-02	Bearing Cone (L68149)
1	059-831-00	Instruction Sheet
1	085-001-00	Rubber Plug

“Cupped” or “with cups” describes the supplied hub. A separate cup part number has not been invented when the source does not list one.

Dexter Parts Kit Catalogue · March 2017 · printed p. 80. Historical context is not current availability or fitment approval.

Three differences worth checking

L68110 is not silently changed to L68111

The UFP K71-792-00 table lists L68110; K71-793-00 lists L68111. Both list L68149 and L44649 cones. Searching by cones alone therefore leaves a cup choice unresolved.

Inspect K71-792-00 →

A seal kit may contain two seals

Kodiak K71-305-00 lists two 010-036-00 grease seals. Dexter K71-720-00 lists one of that seal alongside bearing parts and hardware. The shared seal number does not make the packages equivalent.

Inspect the seal-only package →

“6K” and “7K” are not complete identities

The UFP and Dexter editions use different bearing combinations within these capacity groups. Keep the kit number and manufacturer line together; use the existing inner/outer chart below as a separate check.

Read the scoped pairing chart →

What this finder establishes — and what it does not

It establishes the package contents recorded in the named catalogue, with source quantities and conditions. It does not establish the installed parts on your trailer, wheel-end adjustment, tightening torque, current availability, brand interchange or a complete safe repair procedure.

BearingScope has independently organized the factual tables for lookup and comparison. Catalogue scope and component markings are preserved; commercial claims and prices are omitted. Source snapshots and page-level evidence are retained privately. Checked 2026-10-04.

Six ambiguous source entries are withheld

The UFP tables for K71-788-00, K71-789-00, K71-794-00 and K71-795-00 contain markings requiring independent corroboration: LL44643, LL44649, LM62010 or 14276A. The inner/outer labels on K08-174-90 and K08-174-93 also need reconciliation with the separate demountable-axle chart. None has been silently corrected or promoted into a replacement recommendation.

Identify each component Replacement planning and risks Check a replacement candidate

Bearing, race, seal, hub and cap: which part are you looking for?

A request such as '5-lug trailer bearing kit' is missing the bearing identities. The lug count describes the wheel attachment, not every internal hub interface. Similarly, 'boat trailer' describes use; it does not identify one universal bearing.

On smaller screens, scroll the table sideways to read all columns.

Part	Identity to record	Do not substitute
Inner bearing cone	Full marking and inboard position	Outer cone number
Outer bearing cone	Full marking and outboard position	Inner cone number
Cup / outer race	Its own marking and approved cone pairing	Cone bore as a complete cup specification
Grease seal	Part number, lip arrangement and mating surfaces	Bearing width as seal width
Hub / hub-drum	Assembly reference, bearing seats and wheel/brake interfaces	Lug count as a bearing number
Dust cap or protector	Mounting bore and retention design	Spindle diameter as cap diameter

Timken trailer kit examples: axle size is not the full bearing envelope

Historical reference from Timken LV12, January 2019, page 5. Values below retain the source's axle-size and seal-width labels, in inches. They are not d×D×B bearing dimensions or an application approval.

BT100 and BT101 illustrate why a 1-inch description is incomplete: their listed seal widths differ. These historical kit references do not establish current availability, every component number or fitment to a named trailer.

On smaller screens, scroll the table sideways to read all columns.

Kit reference	Source arrangement	Axle size: inner × outer (in)	Seal width (in)
BT100	Straight	1	0.406
BT101	Straight	1	0.250
BT114	Straight	1 1/4	0.406
BT116	Straight	1 1/16	0.406
BT134	Straight	3/4	0.468
BT214	Step-down	1 1/4 × 3/4	0.406
BT216	Step-down	1 1/16 × 3/4	0.406
BT238	Step-down	1 3/8 × 1 1/16	0.250

How to measure an unidentified trailer bearing arrangement

Clean the measuring surfaces and record units, instrument and measurement location. Retain the full marking where it remains readable. Worn surfaces and rounded measurements are not manufacturing specifications.

An inch fraction written without punctuation is ambiguous: '1 1 16' needs confirmation as 1 1/16 inch. Do not silently round it to 25 mm or reinterpret it as three dimensions. A source drawing or matched part record must resolve the intended interface.

On smaller screens, scroll the table sideways to read all columns.

Measurement	Record it at	Keep separate from
Inner bearing journal diameter	Inboard bearing seat on the spindle	Seal running surface
Outer bearing journal diameter	Outboard bearing seat on the spindle	Thread diameter
Cone bore	The identified cone's shaft interface	Cup outside diameter
Cup outside diameter and width	The identified outer ring	Complete assembled bearing width
Seal interfaces	Shaft running surface, housing seat and axial space	Either bearing's dimensions
Cap mounting bore	The hub's cap seat	Bearing bore

Use a component model page without inventing trailer fitment

For readable markings such as L44643, L44649, L68149 or 25580, the linked model references below provide a starting point for catalogue research. These links do not say that the four numbers belong in one kit, fit every trailer or can replace one another.

Keep a five-part identity sheet: inner cone and cup, outer cone and cup, and seal. Add the hub reference and cap identity separately. A drawing request remains incomplete until its designation and assembly scope agree with that sheet.

Trailer bearing size questions

Are all trailer or boat-trailer bearings the same?

No. First distinguish the actual hub system and components. Even the kit examples above include different axle arrangements and seal widths.

Can a 3,500 lb or 7,000 lb axle rating identify my bearing?

Not by itself. It is useful context for locating the correct axle documentation, not a complete bearing, seal or adjustment specification.

Does a bearing kit include a hub?

Do not infer the contents from the word kit. Confirm the documented contents and whether the listing describes loose bearing components, a seal set or a complete hub.

Is this a universal trailer bearing size chart?

No. The numeric table is explicitly a small historical Timken kit reference. Unknown trailer models, missing cup pairings and complete bearing dimensions remain separate lookup requirements.

Dexter inner / outer cup-and-cone reference chart

Manufacturer-specific configurations from the cached Dexter light-duty manual, printed page 79. K denotes the source axle-rating shorthand in thousands of pounds, not bearing dynamic capacity. Read all configuration columns together; this is not a universal capacity-to-kit lookup.

Each kit column refers to the bearing position shown, not a complete hub or seal kit. The chart does not identify the seal. The source retains an asterisk at the 6K, six-bolt brake-size entry; no extra applicability is inferred from that marker.

Notice the different outer sets for nominal 7K configurations. Also, 7.2K and 8K rows list the same industry cup/cone references but different Dexter kit numbers. Capacity or one shared part number is not enough to merge these records.

On smaller screens, scroll the table sideways to read all columns.

Axle rating	Brake size	Hub configuration	Inner cup / cone	Inner Dexter kit	Outer cup / cone	Outer Dexter kit
2K	7×1¼ in	4 or 5 bolt	L44610 / L44649	K71-306-00	L44610 / L44649	K71-306-00
2.8K	10×1½ in	4 or 5 bolt	LM67010 / LM67048	K71-307-00	L44610 / L44649	K71-306-00
3K	10×1½ in	5 bolt	LM67010 / LM67048	K71-307-00	L44610 / L44649	K71-306-00
3.5K; 4K (10F)	10×2¼ in	4, 5 or 6 bolt	L68111 / L68149	K71-390-00	L44610 / L44649	K71-306-00
4.4K	10×2¼ in	6 bolt	L68111 / L68149	K71-390-00	LM67010 / LM67048	K71-307-00
5.2K	12×2 in	6 bolt	25520 / 25580	K71-308-00	LM67010 / LM67048	K71-307-00
7K	12×2 in	5 bolt demount	25520 / 25580	K71-308-00	15245 / 15123	K71-309-00
6K	12×2 in*	6 bolt	25520 / 25580	K71-308-00	15245 / 15123	K71-309-00
6K; 7K	12×2 in	8 bolt	25520 / 25580	K71-308-00	14276 / 14125A	K71-310-00
7.2K	12¼×2½ in	8 bolt	25520 / 25580	K71-308-00	02420 / 02475	K71-405-00
8K	12¼×3⅜ in	8 bolt	25520 / 25580	K71-308-00	02420 / 02475	K71-415-00

Holden LM vs Ford SL: bearing numbers and nominal dimensions

AL-KO Australian reference, printed page 33. Dimensions below are nominal housing and bearing-journal diameters in mm. They are not a complete bearing d×D×B specification, finished-fit tolerances or permission to interchange hubs.

The two families share the listed 59.10/45.20 mm housing diameters but use different inner and outer journals. A matching cup-seat or cap diameter therefore does not establish the same bearing arrangement. “Holden” and “Ford” here are the manufacturer’s bearing-family labels, not a vehicle fitment claim.

On smaller screens, scroll the table sideways to read all columns.

AL-KO family	Position	Cup	Cone	Nominal housing Ø mm	Nominal bearing journal Ø mm
LM / Holden	Inner	LM67010	LM67048	59.10	31.75
LM / Holden	Outer	LM11910	LM11949	45.20	19.05
SL / Ford slimline	Inner	L68110	L68149	59.10	35.0
SL / Ford slimline	Outer	LM12710	LM12749	45.20	22.0

LM and SL grease seal references

Seal journals differ from bearing journals. These records retain the catalogue’s nominal precision; they do not specify seal material, installation depth or fit tolerance. Verify the current seal and the actual assembly before replacement.

On smaller screens, scroll the table sideways to read all columns.

Family	AL-KO seal	Manufacturer reference	Nominal housing Ø mm	Nominal seal journal Ø mm	Marine seal reference
LM / Holden	491015	28550	59.10	37.5	491017
SL / Ford	492015	28600	59.10	43.9	491018

AL-KO LM / SL loose-kit numbers and listed contents

Historical catalogue reference, printed page 36. Country labels reproduce the catalogue’s part variants, not a quality ranking. A kit with no cups listed must not be mistaken for a complete cup-and-cone replacement set.

These are manufacturer kit references, not current stock or vehicle-fitment claims. No Timken, SKF or other brand equivalence is implied by an AL-KO kit number. Match the actual axle and confirm the current contents before using a kit.

On smaller screens, scroll the table sideways to read all columns.

Family	AL-KO kit	Catalogue variant	Seal description	Listed contents
LM	482000	Japanese	Standard seal	Cups, cones, cap and seal
LM	482025	Chinese	Standard seal	Cups, cones, cap and seal
LM	482020	Chinese	Marine seal	Cups, cones, cap and marine seal
LM	482050	Japanese	Marine seal	Cups, cones, cap and marine seal
LM	482000NC	Japanese	Standard seal	Cones, cap and seal; cups not listed
LM	482025NC	Chinese	Marine seal	Cones, cap and marine seal; cups not listed
SL	484000	Japanese	Standard seal	Cups, cones, cap and seal
SL	482035	Chinese	Standard seal	Cups, cones, cap and seal
SL	484050	Japanese	Marine seal	Cups, cones, cap and marine seal
SL	482040	Chinese	Marine seal	Cups, cones, cap and marine seal
SL	484000NC	Japanese	Standard seal	Cones, cap and seal; cups not listed
SL	482035NC	Chinese	Standard seal	Cones, cap and seal; cups not listed

Why one cone number does not identify the whole hub

The earlier Timken axle-size/seal-width table remains a separate reference, with different column meanings. These additional manufacturer charts extend the lookup; none turns an unknown trailer make, spindle or seal into a verified match. Use the linked replacement guide only after identification.

On smaller screens, scroll the table sideways to read all columns.

Shared clue	What the source records show	Lookup consequence
L68149 cone	AL-KO SL lists L68110 cup; the illustrated Dexter configurations list L68111	Keep manufacturer, cup and assembly together; do not merge by cone
7K axle label	Dexter chart lists more than one outer pairing by hub configuration	Check brake and hub identity, not capacity alone
LM / SL nominal cup housing	Same listed housing diameters, different journal and seal references	A shared housing dimension is not complete fitment
A bearing kit name	Some AL-KO NC kits omit cups from the contents	Read the actual contents before planning replacement

Observation is not diagnosis

What the evidence can — and cannot — tell you

Observation or context	Interpretation to consider	Verification needed
A bearing number is readable	A component can be researched	Record its brand, complete marking and inner/outer position
Only a hub or trailer label is available	An assembly reference may help	Match the axle serial/model and hub configuration before choosing components
Only a diameter is known	One interface has been measured	Identify whether it is a journal, bearing bore, cup seat or cap bore

A practical investigation sequence

Identify and record

Record the trailer and axle identification, hub arrangement and intended task. A bearing lookup, a cap replacement and a complete hub replacement are different requests.

Check the context

With the assembly safely supported and dismantled only under its service instructions, keep inner and outer components separated. Photograph every readable cone, cup and seal marking.

Verify before acting

Compare full designations and source-labelled dimensions. Keep a cone-and-cup pairing attached to its manufacturer's evidence; do not construct a set from two similar-looking rings.

Keep the decision traceable

Save the verified component list and unresolved measurements. If the axle or hub has been changed, an old trailer model application is not enough to approve the current assembly.

Capture the information a model search cannot guess

Keep this checklist with your inspection or comparison. Checking a box only records that you have collected the item; it does not certify the bearing.

Complete brand, designation and all suffixesMachine or vehicle identity and component positionMeasured values, units and operating conditionsPhotographs, drawing revision and source record

0 of 4 information groups recorded.

Technical basis & editorial scope

Original BearingScope workflow, written for catalogue research and comparison. Manufacturer material is used to check principles, not copied as a product endorsement or substituted for model-specific instructions. Reviewed 1 October 2026.

Timken TechTips LV12, January 2019, pages 4–5 — Historical kit axle-size/seal-width table and distinct service scope; not a current fitment catalogue.
Bearing Buddy model selection — Hub/cap measurement and 1980/1980A mounting-bore example, not bearing dimensions.
Dexter light-duty service manual, bearing service and bearing chart, printed page 79 — Manufacturer-specific brake/hub configurations and separate inner/outer cup/cone kit references; capacity is not a universal fitment key.
AL-KO Australian bearing reference, LITALKOAUS00001, printed pages 33 and 36 — Historical LM/Holden and SL/Ford nominal journal/housing dimensions, parts and loose-kit contents; not current availability or universal vehicle fitment.

Source addresses and collection status are retained in the internal audit. No unpublished dimensions, torque settings, service intervals or interchange approvals are inferred.