Technical data
Product specifications
Metric and imperial values are paired where the manufacturer provides both. Expand a section to review its parameters.
Core specifications9 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Series | VLU200414 | |
| Bore diameter | d | 304 mm |
| Outside diameter | D | 518 mm |
| Width | B | 56 mm |
| Basic dynamic load rating | C | 124 kN |
| Basic static load rating | C0 | 110 kN |
| Mass | ≈m | 23.71 kg |
| Minimum operating temperature | Tmin | -25 °C |
| Maximum operating temperature | Tmax | 80 °C |
Manufacturer Identity3 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Schaeffler Product Code | 1114145 | |
| Brand | INA | |
| Base Type | VLU200414 |
Product Identity2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Construction | Slewing ring, 4 point contact bearing, without gear teeth | |
| Short Description | Slewing ring, 4 point contact bearing, without gear teeth |
Technical Data30 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore Diameter (D1) | 304 mm | |
| Outside Diameter (Da) | 518 mm | |
| Total Height (H) | 56 mm | |
| Basic Static Load Rating, Axial (C0A) | 295,000 N | |
| Height Of Individual Ring (H) | 44.5 mm | |
| Operating Temperature Min. (Tmin) | -25 °C | |
| Pitch Circle Diameter Fixing Holes (La) | 490 mm | |
| Basic Dynamic Load Rating, Axial (Ca) | 137,000 N | |
| Operating Temperature Max. (Tmax) | 80 °C | |
| Outside Diameter Inner Ring Upper Tolerance (Outside Diam) | 0 mm | |
| Bore Diameter Lower Tolerance (Bore Diamete) | 0 mm | |
| Inner Diameter Outer Ring (Di) | 415.5 mm | |
| Number Of Fixing Holes In Inner Ring (Ni) | 12 | |
| Fixing Bore (Db) | 18 mm | |
| Outside Diameter Inner Ring (Da) | 412.5 mm | |
| Basic Dynamic Load Rating, Radial (Cr) | 124,000 N | |
| Inner Diameter Outer Ring Upper Tolerance (Inner Diamet) | 0.5 mm | |
| Bore Diameter Upper Tolerance (Bore Diamete) | 0.5 mm | |
| Length Centering Outer Ring (T) | 12 mm | |
| Outside Diameter Lower Tolerance (Outside Diam) | -0.5 mm | |
| Outside Diameter Inner Ring Lower Tolerance (Outside Diam) | -0.5 mm | |
| Basic Static Load Rating, Radial (C0R) | 110,000 N | |
| Ring Cross Section (Ha) | 20 mm | |
| Max. Radial Load Screws (Frictional Contact) (Fr Zul) | 55,000 N | |
| Pitchcircle Diameter Fixing Holes Inner Ring (Li) | 332 mm | |
| Width Outer Ring (Ha) | 44.5 mm | |
| Length Centering Inner Ring (T) | 12 mm | |
| Number Of Fixing Holes In Outer Ring (Na) | 8 | |
| Outside Diameter Upper Tolerance (Outside Diam) | 0 mm | |
| Inner Diameter Outer Ring Lower Tolerance (Inner Diamet) | 0 mm |