INA TSUWZ08

Guideways, inch sizes technical reference with manufacturer-sourced dimensions, characteristics and engineering resources.

Technical data available

Support Rail Width Bottom (B1): 0.37 in
Connecting Bore (K6): 0.169 in
Distance Thread Ar (Min) (Ar Min): 0.6 in
Height Dimension (H4): 0.562 in
Distance Thread Al (Max) (Al Max): 3.5 in
Distance Thread Al (Min) (Al Min): 0.6 in

Compare this model by brand →Check interchange requirements →

Use this page as a technical reference. Verify the current manufacturer specification and the complete application requirements before selection.

Technical data

Product specifications

Metric and imperial values are paired where the manufacturer provides both. Expand a section to review its parameters.

Manufacturer Identity3 parameters

Manufacturer Identity
Parameter	Symbol	Value
Schaeffler Product Code		2166962
Brand		INA
Base Type		TSUWZ08

Product Identity2 parameters

Product Identity
Parameter	Symbol	Value
Construction		Solid profile, for below mounting, with one shaft; corrosion-resistant design possible
Short Description		Guideways, inch sizes

Technical Data18 parameters

Technical Data
Parameter	Symbol	Value
Support Rail Width Bottom (B1)		0.37 in
Connecting Bore (K6)		0.169 in
Distance Thread Ar (Min) (Ar Min)		0.6 in
Height Dimension (H4)		0.562 in
Distance Thread Al (Max) (Al Max)		3.5 in
Distance Thread Al (Min) (Al Min)		0.6 in
Height Dimension Tolerance Low (Tol A2)		-0.05 in
Height Dimension Tolerance High (Tol A2)		0.05 in
Support Rail Width Prism (B3)		0.216 in
Support Rail Width Stop Bar (A2)		0.185 in
Height Dimension Tolerance High (Tol H4)		0.002 in
Height Dimension Tolerance Low (Tol H4)		-0.002 in
Distance Thread Ar (Max) (Ar Max)		3.5 in
Support Rail Height Stop Bar (H1)		0.12 in
Screw Depth Support Rail (T7)		0.63 in
Support Rail Weight (M)		0.11 lbs/ft
Shaft And Support Rail Length Max. (Lmax)		168 in
Distance Radial Thread (Jl)		4 in

Technical documents & data sheet

This product page is a BearingScope catalogue reference, not a manufacturer-certified drawing. Preserve the full brand and designation when comparing files.

Record identity: INA TSUWZ08
Document matching: Exact designation, assembly scope, revision and units must agree.

No verified redistributable CAD or manufacturer PDF is registered for this exact model. A catalogue image is not a dimensioned drawing. Missing technical files are not generated or replaced with unrelated models.

Look up another model or check drawing requirements →

Previous product← INA H55-ZW Flat cage

Next productINA TSUWZ20 Guideways, inch sizes →