Technical data
Product specifications
Metric and imperial values are paired where the manufacturer provides both. Expand a section to review its parameters.
Core specifications4 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Series | RUE35 | |
| Bore diameter | d | 9 mm |
| Width | B | 100 mm |
| Height | H | 48 mm |
Manufacturer Identity3 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Schaeffler Product Code | 2034902 | |
| Brand | INA | |
| Base Type | RUE35 |
Product Identity2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Construction | Long carriage with full complement recirculating roller system for linear recirculating roller bearing and guideway assembly, for oil or grease lubrication | |
| Short Description | Roller monorail guidance system |
Technical Data36 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Max Length Single Piece Guideway (Lmax) | 5,900 mm | |
| Width Carriage (B) | 100 mm | |
| Height System (H) | 48 mm | |
| Dynamic Load Rating (C) | 70,000 N | |
| Load Capacity Dyn (C0) | 175,000 N | |
| Distance (Ar Min) | 20 mm | |
| Overall Length Carriage (L) | 148.8 mm | |
| Length Saddle Plate (L1) | 111 mm | |
| Free Space, System Dimension (H1) | 6.5 mm | |
| Maximum Tightening Torque (K3 Ma) | 41 Nm | |
| Static Moment About Y Axis (M0Y) | 3,350 Nm | |
| Maximum Tightening Torque (K6 Ma) | 24 Nm | |
| Through Bore (D2) | 8.6 mm | |
| Maximum Tightening Torque (G2 Ma) | 41 Nm | |
| Thread Depth (T5) | 12 mm | |
| Increment (Jl) | 40 mm | |
| Distance From Locating Edge To Hole (A2) | 9 mm | |
| Distance (Ar Max) | 31 mm | |
| Max Diameter Of Lubrication Hole N 2 Tec (N2 Max) | 6 mm | |
| Position Lubrication Connector (A3) | 6.6 mm | |
| Static Moment About X Axis (M0X) | 1,500 Nm | |
| Distance From Locating Edge On Carriage To Locating Edge On Guideway (A1) | 33 mm | |
| Position Lubrication Connector (Jl6) | 37.4 mm | |
| Width Rail (B) | 34 mm | |
| Tightening Torque (K1 Ma) | 41 Nm | |
| Distance (Al Max) | 31 mm | |
| Distance (Al Min) | 20 mm | |
| Height (H) | 30 mm | |
| Position Lubrication Connector (A4) | 5.6 mm | |
| Upper Tolerance (Tol H1) | 0.5 mm | |
| Distance Distance (Tol H1) | -0.5 mm | |
| Upper Tolerance (Tol B) | -0.005 mm | |
| Bore Diameter (D1) | 9 mm | |
| Lower Tolerance (Tol B) | -0.035 mm | |
| Position Lubrication Connector (Jl5) | 27.2 mm | |
| Static Moment About Z Axis (M0Z) | 3,000 Nm |
