Technical data
Product specifications
Metric and imperial values are paired where the manufacturer provides both. Expand a section to review its parameters.
Core specifications4 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Series | RUE25 | |
| Bore diameter | d | 6.8 mm |
| Width | B | 70 mm |
| Height | H | 36 mm |
Manufacturer Identity3 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Schaeffler Product Code | 2034718 | |
| Brand | INA | |
| Base Type | RUE25 |
Product Identity2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Construction | Standard carriage with full complement recirculating roller system for linear recirculating roller bearing and guideway assembly, for oil or grease lubrication | |
| Short Description | Roller monorail guidance system |
Technical Data32 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Max Length Single Piece Guideway (Lmax) | 3,930 mm | |
| Width Carriage (B) | 70 mm | |
| Height System (H) | 36 mm | |
| Dynamic Load Rating (C) | 28,000 N | |
| Load Capacity Dyn (C0) | 65,000 N | |
| Distance (Ar Min) | 20 mm | |
| Overall Length Carriage (L) | 91 mm | |
| Length Saddle Plate (L1) | 65.6 mm | |
| Free Space, System Dimension (H1) | 6.5 mm | |
| Maximum Tightening Torque (K3 Ma) | 17 Nm | |
| Static Moment About Y Axis (M0Y) | 760 Nm | |
| Maximum Tightening Torque (K6 Ma) | 10 Nm | |
| Through Bore (D2) | 6.7 mm | |
| Maximum Tightening Torque (G2 Ma) | 24 Nm | |
| Thread Depth (T5) | 10 mm | |
| Increment (Jl) | 30 mm | |
| Distance From Locating Edge To Hole (A2) | 6.5 mm | |
| Distance (Ar Max) | 23 mm | |
| Max Diameter Of Lubrication Hole N 2 Tec (N2 Max) | 3 mm | |
| Position Lubrication Connector (A3) | 7.5 mm | |
| Static Moment About X Axis (M0X) | 350 Nm | |
| Distance From Locating Edge On Carriage To Locating Edge On Guideway (A1) | 23.5 mm | |
| Width Rail (B) | 23 mm | |
| Tightening Torque (K1 Ma) | 17 Nm | |
| Distance (Al Max) | 23 mm | |
| Distance (Al Min) | 20 mm | |
| Height (H) | 22.3 mm | |
| Upper Tolerance (Tol B) | -0.005 mm | |
| Bore Diameter (D1) | 6.8 mm | |
| Lower Tolerance (Tol B) | -0.03 mm | |
| Position Lubrication Connector (Jl5) | 14.5 mm | |
| Static Moment About Z Axis (M0Z) | 680 Nm |
