Technical data
Product specifications
Metric and imperial values are paired where the manufacturer provides both. Expand a section to review its parameters.
Core specifications3 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Series | MKUSE25 | |
| Width | B | 112 mm |
| Height | H | 125 mm |
Manufacturer Identity3 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Schaeffler Product Code | 2077015 | |
| Brand | INA | |
| Base Type | MKUSE25 |
Product Identity2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Construction | Actuators with six-row linear recirculating bearing and guideway assembly, monorail guidance system and ball screw drive.With second, non-driven carriage, single nut (cylindrical) and double spindle support | |
| Short Description | Linear actuator |
Technical Data48 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Total Width (B2) | 112 mm | |
| Total Height (H) | 125 mm | |
| Load Direction I: Compressive Load (Ci) | 61,700 N | |
| Load Direction I: Compressive Load (C0I) | 162,000 N | |
| Maximum Speed (Vmax) | 0.43 m/s | |
| Mass Of Additional Carriage (M3) | 3.37 kg | |
| Load Capacity Spindle Nut Dyn (Ca Mu) | 33,400 N | |
| Mass Of Carriage (Mlaw) | 4.65 kg | |
| Maximum Length Of Support Rail (L2 Max) | 5,850 mm | |
| Tolerance ±0,2 (B87) | 90 mm | |
| Depth Of Thread (T87) | 18 mm | |
| Width Of End Plates (B5) | 111 mm | |
| Distance (A22) | 32 mm | |
| Height Of Bearing Housing (H5) | 124.5 mm | |
| Geometrical Moments Of Inertia Of Support Rail (Lz) | 384 cm4 | |
| Length Of Carriage (L) | 200 mm | |
| Length Of Return Unit (L4) | 32 mm | |
| Mass Moment Of Inertia Of Threaded Spindle (Is) | 6.43 kg*cm2 | |
| Tolerance ±0,2 (H87) | 70 mm | |
| Load Direction Ii: Tensile Load (Cii) | 42,200 N | |
| Load Direction Iii: Lateral Load (C0Iii) | 94,000 N | |
| Tolerance 0,01 (D86) | 75 mm | |
| Maximum Acceleration (Amax) | 20 m/s2 | |
| Length Of Keyway (Nl85) | 20 mm | |
| Max. Permissible Static Moment Per Carriage (M0X) | 1,350 Nm | |
| Tolerance P9 (Nb85) | 6 mm | |
| Load Capacity Fixed Spindle Bearing Dyn (Ca L) | 27,500 N | |
| Tolerance ±0,2 (Jl43) | 110 mm | |
| Load Capacity Fixed Spindle Bearing Stat (C0A L) | 55,000 N | |
| Minimum Distance Between The Carriages (Lx1 Min) | 20 mm | |
| Geometrical Moments Of Inertia Of Support Rail (Ly) | 670 cm4 | |
| Upper Tolerance (Tol Jb4) | 0.1 | |
| Depth Of Thread (T43) | 20 mm | |
| Spindle Diameter (D0) | 32 mm | |
| Effective Length Factor Of Bellow (Fbl) | 1.2 mm | |
| Lower Tolerance (Tol Jb4) | -0.1 | |
| Load Direction Iii: Lateral Load (Ciii) | 45,400 N | |
| Max. Permissible Static Moment Per Carriage (M0Y) | 1,850 Nm | |
| Length Of Drive Pin (L88) | 67 mm | |
| Load Capacity Spindle Nut Stat (C0A Mu) | 54,500 N | |
| Spindle Pitch (P) | 10 mm | |
| Safety Distance (S) | 10 mm | |
| Tolerance H7 (D85) | 19 mm | |
| Width Of Carriage (B1) | 110 mm | |
| Height Of Support Rail (H2) | 102 mm | |
| Max. Permissible Static Moment Per Carriage (M0Z) | 2,000 Nm | |
| Depth Of Keyway (Nt85) | 3.5 mm | |
| Load Direction Ii: Tensile Load (C0Ii) | 90,000 N |