Technical data
Product specifications
Metric and imperial values are paired where the manufacturer provides both. Expand a section to review its parameters.
Core specifications9 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Series | KRE90 | |
| Bore diameter | d | 30 mm |
| Outside diameter | D | 90 mm |
| Width | B | 100 mm |
| Basic dynamic load rating | C | 40.5 kN |
| Basic static load rating | C0 | 84 kN |
| Fatigue load limit | Pu | 11.9 kN |
| Limiting speed | nG | 1300 r/min |
| Mass | ≈m | 1.942 kg |
Manufacturer Identity4 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Schaeffler Product Code | 399996 | |
| Brand | INA | |
| Base Type | KRE90 | |
| X Life Marking | n.r. |
Product Identity2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Construction | Stud type track rollers KRE..-PP-A, single row needle roller bearings with particularly thick-walled outer ring, needle roller and cage assembly and a solid roller stud with fixing thread and a mounting aid, axial guidance of outer ring is provided by the plastic axial plain washers, contact flange and contact washer, three-stage sealing by plastic axial plain washer on both sides, with eccentric collar | |
| Short Description | Stud type track roller |
Technical Data21 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Fit Diameter Of Roller Stud / Stud (D1) | 30 mm | |
| Outside Diamater (D) | 90 mm | |
| Total Width (B) | 100 mm | |
| Basic Dynamic Load Rating, Radial (Cr W) | 40,500 N | |
| Basic Static Load Rating, Radial (C0R W) | 84,000 N | |
| Eccentricity (E) | 1.5 mm | |
| Speed On Permanent Grease Lubrication (Nd G) | 1,300 1/min | |
| Distance To Lubrication Hole (B3) | 15 mm | |
| Bolt/Stud Length Effectively (B2) | 63 mm | |
| Diameter Lubrication Hole (D3) | 4 mm | |
| Diameter Of Eccentric (De) | 35 mm | |
| Width, Outer Ring (C) | 35 mm | |
| Protrusion Outer Ring To Thrust Washer (C1) | 1 mm | |
| Thread Length (Ig) | 32 mm | |
| Nominal Dimension For Hexagonal Socket (W) | 14 mm | |
| Stop Diameter Of Thrust Washer (D2) | 53 mm | |
| Tightening Torque Nut (Ma) | 450 Nm | |
| Fatigue Load Limit, Radial (Cur W) | 11,900 N | |
| Minimum Chamfer Dimension (Rmin) | 1.1 mm | |
| Witdh Of Thrust Washer (B1) | 37 mm | |
| Width, Eccentric (Be) | 29 mm |
