Technical data
Product specifications
Metric and imperial values are paired where the manufacturer provides both. Expand a section to review its parameters.
Core specifications9 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Series | KR80 | |
| Bore diameter | d | 30 mm |
| Outside diameter | D | 80 mm |
| Width | B | 100 mm |
| Basic dynamic load rating | C | 38.5 kN |
| Basic static load rating | C0 | 78 kN |
| Fatigue load limit | Pu | 11.2 kN |
| Limiting speed | nG | 1300 r/min |
| Mass | ≈m | 1.58 kg |
Manufacturer Identity4 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Schaeffler Product Code | 399524 | |
| Brand | INA | |
| Base Type | KR80 | |
| X Life Marking | n.r. |
Product Identity2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Construction | Stud type track rollers KR..-PP-A, single row needle roller bearings with particularly thick-walled outer ring, needle roller and cage assembly and a solid roller stud with fixing thread and a mounting aid, axial guidance of outer ring is provided by the plastic axial plain washers, contact flange and contact washer, three-stage sealing by plastic axial plain washer on both sides, without eccentric collar | |
| Short Description | Stud type track roller |
Technical Data18 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Fit Diameter Of Roller Stud / Stud (D1) | 30 mm | |
| Outside Diamater (D) | 80 mm | |
| Total Width (B) | 100 mm | |
| Basic Dynamic Load Rating, Radial (Cr W) | 38,500 N | |
| Basic Static Load Rating, Radial (C0R W) | 78,000 N | |
| Speed On Permanent Grease Lubrication (Nd G) | 1,300 1/min | |
| Distance To Lubrication Hole (B3) | 15 mm | |
| Bolt/Stud Length Effectively (B2) | 63 mm | |
| Width Of Flats (W) | 14 mm | |
| Diameter Lubrication Hole (D3) | 4 mm | |
| Width, Outer Ring (C) | 35 mm | |
| Protrusion Outer Ring To Thrust Washer (C1) | 1 mm | |
| Thread Length (Ig) | 32 mm | |
| Stop Diameter Of Thrust Washer (D2) | 53 mm | |
| Maximum Witdh Of Thrust Washer (B1) | 37 mm | |
| Tightening Torque Nut (Ma) | 450 Nm | |
| Fatigue Load Limit, Radial (Cur W) | 11,200 N | |
| Minimum Chamfer Dimension (Rmin) | 1.1 mm |
