Technical data
Product specifications
Metric and imperial values are paired where the manufacturer provides both. Expand a section to review its parameters.
Core specifications9 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Series | KR16 | |
| Bore diameter | d | 6 mm |
| Outside diameter | D | 16 mm |
| Width | B | 28 mm |
| Basic dynamic load rating | C | 3.2 kN |
| Basic static load rating | C0 | 3.45 kN |
| Fatigue load limit | Pu | 0.465 kN |
| Limiting speed | nG | 14000 r/min |
| Mass | ≈m | 0.02085 kg |
Manufacturer Identity4 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Schaeffler Product Code | 399496 | |
| Brand | INA | |
| Base Type | KR16 | |
| X Life Marking | n.r. |
Product Identity2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Construction | Stud type track rollers KR.., single row needle roller bearings with particularly thick-walled outer ring, needle roller and cage assembly and a solid roller stud with fixing thread and a mounting aid, axial guidance of outer ring is provided by the contact flange and contact washer, gap seals on both sides, without eccentric collar | |
| Short Description | Stud type track roller |
Technical Data17 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Fit Diameter Of Roller Stud / Stud (D1) | 6 mm | |
| Outside Diamater (D) | 16 mm | |
| Total Width (B) | 28 mm | |
| Basic Dynamic Load Rating, Radial (Cr W) | 3,200 N | |
| Basic Static Load Rating, Radial (C0R W) | 3,450 N | |
| Speed On Permanent Grease Lubrication (Nd G) | 14,000 1/min | |
| Bolt/Stud Length Effectively (B2) | 16 mm | |
| Width, Outer Ring (C) | 11 mm | |
| Protrusion Outer Ring To Thrust Washer (C1) | 0.6 mm | |
| Thread Length (Ig) | 8 mm | |
| Stop Diameter Of Thrust Washer (D2) | 12.5 mm | |
| Maximum Witdh Of Thrust Washer (B1) | 12.2 mm | |
| Radius Of Outer Ring Outside Profile (R) | 500 mm | |
| Protrusion Lubrication Nipple (Protrusion L) | 1.5 mm | |
| Tightening Torque Nut (Ma) | 3 Nm | |
| Fatigue Load Limit, Radial (Cur W) | 465 N | |
| Minimum Chamfer Dimension (Rmin) | 0.15 mm |
