Technical data
Product specifications
Metric and imperial values are paired where the manufacturer provides both. Expand a section to review its parameters.
Core specifications7 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore diameter | d | 30 mm |
| Outside diameter | D | 73 mm |
| Width | B | 146.5 mm |
| Basic static load rating | C0 | 139 kN |
| Mass | ≈m | 0.93 kg |
| Minimum operating temperature | Tmin | -50 °C |
| Maximum operating temperature | Tmax | 200 °C |
Manufacturer Identity4 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Schaeffler Product Code | 346384 | |
| Brand | INA | |
| Base Type | GIR30-UK | |
| X Life Marking | n.r. |
Product Identity2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Construction | Rod end with internal thread, maintenance-free, sliding layer: PTFE composite, DIN ISO 12240-4, dimension series E, type F, inner ring curved surface with hard chromium coating, open design, right hand thread | |
| Short Description | Rod end |
Technical Data27 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore Diameter Bearing (D) | 30 mm | |
| Outer Eye Diameter (D2) | 73 mm | |
| Total Length Internal Thread Head (L4) | 146.5 mm | |
| Basic Static Load Rating, Radial (C0R) | 139,000 N | |
| Operating Temperature Min. (Tmin) | -50 °C | |
| Length Rod End Shank (L5) | 15 mm | |
| Shank Length Internal Thread Head (H1) | 110 mm | |
| Operating Temperature Max. (Tmax) | 200 °C | |
| Outside Diameter Bearing (D) | 47 mm | |
| Basic Dynamic Load Rating, Radial (Cr) | 65,900 N | |
| Width Of The Rod End (C1) | 19 mm | |
| Width Inner Ring, Upper Tolerance (Bot) | 0 mm | |
| Edge Spacing (R1Smin) | 0.6 mm | |
| Bore Diameter Bearing, Upper Tolerance (Dot) | 0 mm | |
| Distance Drilling With/Shaft Start (L7) | 37 mm | |
| Outer Flange Diameter Inner Ring (D1) | 34.2 mm | |
| Radial Clearance, Maximum (Grmax) | 0.05 mm | |
| Radial Clearance, Minimum (Grmin) | 0 mm | |
| Shank Diameter, Large (D5) | 50 mm | |
| Width Inner Ring (B) | 22 mm | |
| Ball Diameter (Dk) | 40.7 mm | |
| Bore Diameter Bearing, Lower Tolerance (Dut) | -0.01 mm | |
| Tilt Angle (Α) | 6 ° | |
| Width Across Flat (W) | 41 mm | |
| Width Inner Ring, Lower Tolerance (But) | -0.12 mm | |
| Shank Diameter (D4) | 40 mm | |
| Thread Length Internal Thread (L3) | 56 mm |
