Technical data
Product specifications
Metric and imperial values are paired where the manufacturer provides both. Expand a section to review its parameters.
Core specifications7 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore diameter | d | 50 mm |
| Outside diameter | D | 112 mm |
| Width | B | 216 mm |
| Basic static load rating | C0 | 314 kN |
| Mass | ≈m | 3.54 kg |
| Minimum operating temperature | Tmin | -30 °C |
| Maximum operating temperature | Tmax | 130 °C |
Manufacturer Identity3 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Schaeffler Product Code | 346352 | |
| Brand | INA | |
| Base Type | GIL50-UK-2RS |
Product Identity2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Construction | Rod end with internal thread, maintenance-free, sliding layer: ELGOGLIDE, DIN ISO 12240-4, dimension series E, type F, inner ring curved surface with hard chromium coating, sealed, left hand thread | |
| Short Description | Rod end |
Technical Data27 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore Diameter Bearing (D) | 50 mm | |
| Outer Eye Diameter (D2) | 112 mm | |
| Total Length Internal Thread Head (L4) | 216 mm | |
| Basic Static Load Rating, Radial (C0R) | 314,000 N | |
| Operating Temperature Min. (Tmin) | -30 °C | |
| Length Rod End Shank (L5) | 20 mm | |
| Shank Length Internal Thread Head (H1) | 160 mm | |
| Operating Temperature Max. (Tmax) | 130 °C | |
| Outside Diameter Bearing (D) | 75 mm | |
| Basic Dynamic Load Rating, Radial (Cr) | 444,000 N | |
| Width Of The Rod End (C1) | 30 mm | |
| Width Inner Ring, Upper Tolerance (Bot) | 0 mm | |
| Edge Spacing (R1Smin) | 0.6 mm | |
| Bore Diameter Bearing, Upper Tolerance (Dot) | 0 mm | |
| Distance Drilling With/Shaft Start (L7) | 60 mm | |
| Outer Flange Diameter Inner Ring (D1) | 55.9 mm | |
| Radial Clearance, Maximum (Grmax) | 0.06 mm | |
| Radial Clearance, Minimum (Grmin) | 0 mm | |
| Shank Diameter, Large (D5) | 75 mm | |
| Width Inner Ring (B) | 35 mm | |
| Ball Diameter (Dk) | 66 mm | |
| Bore Diameter Bearing, Lower Tolerance (Dut) | -0.012 mm | |
| Tilt Angle (Α) | 6 ° | |
| Width Across Flat (W) | 65 mm | |
| Width Inner Ring, Lower Tolerance (But) | -0.12 mm | |
| Shank Diameter (D4) | 62 mm | |
| Thread Length Internal Thread (L3) | 68 mm |
