Technical data
Product specifications
Metric and imperial values are paired where the manufacturer provides both. Expand a section to review its parameters.
Core specifications9 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Series | GIHRK30-UK | |
| Bore diameter | d | 30 mm |
| Outside diameter | D | 64 mm |
| Width | B | 94 mm |
| Basic dynamic load rating | C | 165 kN |
| Basic static load rating | C0 | 96.8 kN |
| Mass | ≈m | 0.72 kg |
| Minimum operating temperature | Tmin | -30 °C |
| Maximum operating temperature | Tmax | 130 °C |
Manufacturer Identity3 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Schaeffler Product Code | 2875230 | |
| Brand | INA | |
| Base Type | GIHRK30-UK |
Product Identity2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Construction | Hydraulic rod end, with thread clamping device, right hand thread, maintenance-free, sliding layer: ELGOGLIDE, sealed design | |
| Short Description | Rod end |
Technical Data26 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore Diameter Bearing (D) | 30 mm | |
| Outer Eye Diameter (D2) | 64 mm | |
| Total Length Internal Thread Head (L4) | 94 mm | |
| Basic Dynamic Load Rating, Radial (Cr) | 165,000 N | |
| Basic Static Load Rating, Radial (C0R) | 96,800 N | |
| Shank Length Internal Thread Head (H1) | 60 mm | |
| Operating Temperature Min. (Tmin) | -30 °C | |
| Operating Temperature Max. (Tmax) | 130 °C | |
| Outside Diameter Bearing (D) | 47 mm | |
| Width Of The Rod End (C1) | 28 mm | |
| Width Inner Ring, Upper Tolerance (Bot) | 0 mm | |
| Edge Spacing (R1Smin) | 0.6 mm | |
| Bore Diameter Bearing, Upper Tolerance (Dot) | 0 mm | |
| Distance Drilling With/Shaft Start (L7) | 30 mm | |
| Outer Flange Diameter Inner Ring (D1) | 34.2 mm | |
| Radial Clearance, Maximum (Grmax) | 0.05 mm | |
| Radial Clearance, Minimum (Grmin) | 0 mm | |
| Shank Diameter, Large (D5) | 50 mm | |
| Ball Diameter (Dk) | 40.7 mm | |
| Width Inner Ring (B) | 22 mm | |
| Bore Diameter Bearing, Lower Tolerance (Dut) | -0.01 mm | |
| Tilt Angle (Α) | 6 ° | |
| Width Inner Ring, Lower Tolerance (But) | -0.12 mm | |
| Shank Diameter (D4) | 32 mm | |
| Tightening Torque (Ma) | 32 Nm | |
| Thread Length Internal Thread (L3) | 23 mm |
