Technical data
Product specifications
Metric and imperial values are paired where the manufacturer provides both. Expand a section to review its parameters.
Core specifications9 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Series | GIHLK80-DO-C | |
| Bore diameter | d | 80 mm |
| Outside diameter | D | 176 mm |
| Width | B | 265 mm |
| Basic dynamic load rating | C | 522 kN |
| Basic static load rating | C0 | 670 kN |
| Mass | ≈m | 14.6 kg |
| Minimum operating temperature | Tmin | -60 °C |
| Maximum operating temperature | Tmax | 200 °C |
Manufacturer Identity3 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Schaeffler Product Code | 2234946 | |
| Brand | INA | |
| Base Type | GIHLK80-DO-C |
Product Identity2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Construction | Hydraulic rod end, with thread clamping device, left hand thread, requiring maintenance, sliding contact surface: steel/steel, open design | |
| Short Description | Rod end |
Technical Data26 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore Diameter Bearing (D) | 80 mm | |
| Outer Eye Diameter (D2) | 176 mm | |
| Total Length Internal Thread Head (L4) | 265 mm | |
| Basic Dynamic Load Rating, Radial (Cr) | 522,000 N | |
| Basic Static Load Rating, Radial (C0R) | 670,000 N | |
| Shank Length Internal Thread Head (H1) | 170 mm | |
| Operating Temperature Min. (Tmin) | -60 °C | |
| Operating Temperature Max. (Tmax) | 200 °C | |
| Outside Diameter Bearing (D) | 120 mm | |
| Width Of The Rod End (C1) | 60 mm | |
| Width Inner Ring, Upper Tolerance (Bot) | 0 mm | |
| Edge Spacing (R1Smin) | 1 mm | |
| Bore Diameter Bearing, Upper Tolerance (Dot) | 0.03 mm | |
| Distance Drilling With/Shaft Start (L7) | 80 mm | |
| Outer Flange Diameter Inner Ring (D1) | 89.4 mm | |
| Radial Clearance, Maximum (Grmax) | 0.142 mm | |
| Radial Clearance, Minimum (Grmin) | 0.055 mm | |
| Shank Diameter, Large (D5) | 160 mm | |
| Ball Diameter (Dk) | 105 mm | |
| Width Inner Ring (B) | 55 mm | |
| Bore Diameter Bearing, Lower Tolerance (Dut) | 0 mm | |
| Tilt Angle (Α) | 6 ° | |
| Width Inner Ring, Lower Tolerance (But) | -0.03 mm | |
| Shank Diameter (D4) | 105 mm | |
| Tightening Torque (Ma) | 535 Nm | |
| Thread Length Internal Thread (L3) | 80 mm |
