Technical data
Product specifications
Metric and imperial values are paired where the manufacturer provides both. Expand a section to review its parameters.
Core specifications9 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore diameter | d | 65 mm |
| Outside diameter | D | 100 mm |
| Width | B | 22 mm |
| Height | H | 23 mm |
| Basic dynamic load rating | C | 520 kN |
| Basic static load rating | C0 | 867 kN |
| Mass | ≈m | 0.77 kg |
| Minimum operating temperature | Tmin | -50 °C |
| Maximum operating temperature | Tmax | 150 °C |
Manufacturer Identity4 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Schaeffler Product Code | 347596 | |
| Brand | INA | |
| Base Type | GE65-SW | |
| X Life Marking | n.r. |
Product Identity2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Construction | Angular contact spherical plain bearing, maintenance-free, DIN ISO 12240-2, inner ring curved surface with hard chromium coating, open design | |
| Short Description | Spherical plain bearing |
Technical Data29 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore Diameter Bearing (D) | 65 mm | |
| Outside Diameter Bearing (D) | 100 mm | |
| Width Inner Ring (B) | 22 mm | |
| Basic Dynamic Load Rating, Radial (Cr) | 520,000 N | |
| Basic Static Load Rating, Radial (C0R) | 867,000 N | |
| Height (T) | 23 mm | |
| Operating Temperature Min. (Tmin) | -50 °C | |
| Connection Measure Inner Ring (Db Max) | 83 mm | |
| Height, Upper Tolerance (Tot) | 0.25 mm | |
| Operating Temperature Max. (Tmax) | 150 °C | |
| Plane Surface Spacing (S) | 5 mm | |
| Housing Connection Diameter (Da Min) | 84 mm | |
| Width Inner Ring, Upper Tolerance (Bot) | 0 mm | |
| Edge Spacing (R1Smin) | 1.5 mm | |
| Outside Diameter, Upper Tolerance (Dot) | 0 mm | |
| Bore Diameter Bearing, Upper Tolerance (Dot) | 0 mm | |
| Width, Outer Ring (C) | 22 mm | |
| Width Outer Ring, Lower Tolerance (Cot) | -0.3 mm | |
| Edge Spacing (R2Smin) | 0.6 mm | |
| Ball Diameter (Dk) | 92 mm | |
| Width Outer Ring, Upper Tolerance (Cut) | 0 mm | |
| Bore Diameter Bearing, Lower Tolerance (Dut) | -0.015 mm | |
| Tilt Angle (Α) | 1.3 ° | |
| Width Inner Ring, Lower Tolerance (But) | -0.3 mm | |
| Bore Diameter Of Housing Washer (D1) | 75.6 mm | |
| Connection Measure Inner Ring (Da Max) | 74.4 mm | |
| Outside Diameter, Lower Tolerance (Dut) | -0.018 mm | |
| Connection Diameter (Db Min) | 93 mm | |
| Height, Lower Tolerance (Tut) | -0.25 mm |
