Technical data
Product specifications
Metric and imperial values are paired where the manufacturer provides both. Expand a section to review its parameters.
Core specifications7 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore diameter | d | 240 mm |
| Outside diameter | D | 400 mm |
| Width | B | 87 mm |
| Height | H | 103 mm |
| Mass | ≈m | 57.6 kg |
| Minimum operating temperature | Tmin | -50 °C |
| Maximum operating temperature | Tmax | 150 °C |
Manufacturer Identity4 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Schaeffler Product Code | 347650 | |
| Brand | INA | |
| Base Type | GE240-AW-XL | |
| X Life Marking | XL |
Product Identity2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Construction | Spherical plain bearing GE..-AW-A-XL, axial/oblique, maintenance-free | |
| Short Description | Spherical plain bearing |
Technical Data29 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore Diameter Bearing (D) | 240 mm | |
| Outside Diameter Bearing (D) | 400 mm | |
| Width Inner Ring (B) | 87 mm | |
| Basic Dynamic Load Rating, Axial (Ca) | 10,300,000 N | |
| Basic Static Load Rating, Axial (C0A) | 17,200,000 N | |
| Height (T) | 103 mm | |
| Operating Temperature Min. (Tmin) | -50 °C | |
| Height, Upper Tolerance (Tot) | 0 mm | |
| Operating Temperature Max. (Tmax) | 150 °C | |
| Plane Surface Spacing (S) | 77.5 mm | |
| Housing Connection Diameter (Da Min) | 309 mm | |
| Width Inner Ring, Upper Tolerance (Bot) | 0 mm | |
| Edge Spacing (R1Smin) | 1.5 mm | |
| Outer Eye Diameter (D2) | 382 mm | |
| Outside Diameter, Upper Tolerance (Dot) | 0 mm | |
| Bore Diameter Bearing, Upper Tolerance (Dot) | 0 mm | |
| Width, Outer Ring (C) | 73 mm | |
| Width Outer Ring, Lower Tolerance (Cot) | -0.6 mm | |
| Edge Spacing (R2Smin) | 0.6 mm | |
| Ball Diameter (Dk) | 420 mm | |
| Width Outer Ring, Upper Tolerance (Cut) | 0 mm | |
| Bore Diameter Bearing, Lower Tolerance (Dut) | -0.03 mm | |
| Tilt Angle (Α) | 6 ° | |
| Width Inner Ring, Lower Tolerance (But) | -0.6 mm | |
| Bore Diameter Of Housing Washer (D1) | 294 mm | |
| Connection Measure Inner Ring (Da Max) | 314 mm | |
| Front Surface Diameter Of Shaft Washer (D3) | 314 mm | |
| Outside Diameter, Lower Tolerance (Dut) | -0.04 mm | |
| Height, Lower Tolerance (Tut) | -0.6 mm |
