Technical data
Product specifications
Metric and imperial values are paired where the manufacturer provides both. Expand a section to review its parameters.
Core specifications8 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore diameter | d | 20 mm |
| Outside diameter | D | 51 mm |
| Width | B | 104 mm |
| Basic dynamic load rating | C | 57 kN |
| Basic static load rating | C0 | 22.8 kN |
| Mass | ≈m | 0.35 kg |
| Minimum operating temperature | Tmin | -10 °C |
| Maximum operating temperature | Tmax | 80 °C |
Manufacturer Identity3 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Schaeffler Product Code | 346086 | |
| Brand | INA | |
| Base Type | GAKSR20-PS |
Product Identity2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Construction | Corrosion-resistant rod end, with external thread, right hand thread, maintenance-free, sliding layer: PTFE film, DIN ISO 12240-4, dimension series K, type F, open design | |
| Short Description | Rod end |
Technical Data24 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore Diameter Bearing (D) | 20 mm | |
| Outer Eye Diameter (D2) | 51 mm | |
| Total Length (L2) | 104 mm | |
| Basic Dynamic Load Rating, Radial (Cr) | 57,000 N | |
| Basic Static Load Rating, Radial (C0R) | 22,800 N | |
| Operating Temperature Min. (Tmin) | -10 °C | |
| Operating Temperature Max. (Tmax) | 80 °C | |
| Outside Diameter Bearing (D) | 40 mm | |
| Width Of The Rod End (C1) | 18 mm | |
| Width Inner Ring, Upper Tolerance (Bot) | 0 mm | |
| Edge Spacing (R1Smin) | 0.3 mm | |
| Bore Diameter Bearing, Upper Tolerance (Dot) | 0.021 mm | |
| Distance Drilling With/Shaft Start (L7) | 25 mm | |
| Outer Flange Diameter Inner Ring (D1) | 24.4 mm | |
| Radial Clearance, Maximum (Grmax) | 0.055 mm | |
| Radial Clearance, Minimum (Grmin) | 0.01 mm | |
| Thread Length (L1) | 45 mm | |
| Total Length (L 2) | 104 mm | |
| Length Of Thread (H) | 78 mm | |
| Width Inner Ring (B) | 25 mm | |
| Ball Diameter (Dk) | 34.9 mm | |
| Bore Diameter Bearing, Lower Tolerance (Dut) | 0 mm | |
| Tilt Angle (Α) | 15 ° | |
| Width Inner Ring, Lower Tolerance (But) | -0.12 mm |
