Technical data
Product specifications
Metric and imperial values are paired where the manufacturer provides both. Expand a section to review its parameters.
Core specifications9 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Series | GAKLB22 | |
| Bore diameter | d | 22 mm |
| Outside diameter | D | 42 mm |
| Width | B | 111.5 mm |
| Basic dynamic load rating | C | 35.8 kN |
| Basic static load rating | C0 | 48.8 kN |
| Mass | ≈m | 0.435 kg |
| Minimum operating temperature | Tmin | -50 °C |
| Maximum operating temperature | Tmax | 250 °C |
Manufacturer Identity3 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Schaeffler Product Code | 346766 | |
| Brand | INA | |
| Base Type | GAKLB22 |
Product Identity2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Construction | Rod end with external thread, left hand thread, requiring maintenance, sliding contact surface: steel/bronze, DIN ISO 12240-4, dimension series K, type M, open design | |
| Short Description | Rod end |
Technical Data23 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore Diameter Bearing (D) | 22 mm | |
| Outside Diameter Bearing (D) | 42 mm | |
| Total Length External Thread Head (L2) | 111.5 mm | |
| Basic Dynamic Load Rating, Radial (Cr) | 35,800 N | |
| Basic Static Load Rating, Radial (C0R) | 48,800 N | |
| Operating Temperature Min. (Tmin) | -50 °C | |
| Operating Temperature Max. (Tmax) | 250 °C | |
| Width Of The Rod End (C1) | 20 mm | |
| Width Inner Ring, Upper Tolerance (Bot) | 0 mm | |
| Edge Spacing (R1Smin) | 0.3 mm | |
| Outer Eye Diameter (D2) | 55 mm | |
| Bore Diameter Bearing, Upper Tolerance (Dot) | 0.021 mm | |
| Distance Drilling With/Shaft Start (L7) | 26 mm | |
| Outer Flange Diameter Inner Ring (D1) | 25.8 mm | |
| Radial Clearance, Maximum (Grmax) | 0.055 mm | |
| Radial Clearance, Minimum (Grmin) | 0.01 mm | |
| Length Of Thread (H) | 84 mm | |
| Width Inner Ring (B) | 28 mm | |
| Ball Diameter (Dk) | 38.1 mm | |
| Bore Diameter Bearing, Lower Tolerance (Dut) | 0 mm | |
| Shank Length External Thread Head (L1) | 48 mm | |
| Tilt Angle (Α) | 15 ° | |
| Width Inner Ring, Lower Tolerance (But) | -0.12 mm |
