Technical data
Product specifications
Metric and imperial values are paired where the manufacturer provides both. Expand a section to review its parameters.
Core specifications8 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Bore diameter | d | 30 mm |
| Outside diameter | D | 34 mm |
| Width | B | 30 mm |
| Basic dynamic load rating | C | 63 kN |
| Basic static load rating | C0 | 126 kN |
| Mass | ≈m | 0.0366 kg |
| Minimum operating temperature | Tmin | -40 °C |
| Maximum operating temperature | Tmax | 110 °C |
Manufacturer Identity3 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Schaeffler Product Code | 348536 | |
| Brand | INA | |
| Base Type | EGB3030-E50 |
Product Identity2 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Construction | Metal/polymer composite plain bush, low-maintenance, ISO 3547, with steel backing | |
| Short Description | Bush |
Technical Data24 parameters
| Parameter | Symbol | Value |
|---|---|---|
| Inner Diameter (Di) | 30 mm | |
| Outer Diameter (Do) | 34 mm | |
| Total Width (B) | 30 mm | |
| Basic Dynamic Load Rating, Radial (Cr) | 63,000 N | |
| Basic Static Load Rating, Radial (C0R) | 126,000 N | |
| Outer Chamfer (F) | 1.2 mm | |
| Operating Temperature Min. (Tmin) | -40 °C | |
| Operating Temperature Max. (Tmax) | 110 °C | |
| Inner Edge Break, Max. (Fi Max) | 0.7 mm | |
| Inner Diameter, Lower Tolerance (Dut) | 0.073 mm | |
| Inner Diameter, Upper Tolerance (Di Ot) | 0.143 mm | |
| Outer Chamfer, Upper Tolerance (Fot) | 0.4 mm | |
| Wall Thickness Lower Tolerance (S3 Ut) | -0.03 mm | |
| Height, Lower Tolerance (B1Ut) | -0.25 mm | |
| Outer Chamfer, Lower Tolerance (Fut) | -0.4 mm | |
| Inner Edge Break (Fi) | 0.1 mm | |
| Outer Dismeter, Upper Tolerance (Dot) | 0.85 mm | |
| Inner Edge Break, Min. (Fi Min) | 0.1 mm | |
| Wall Thickness Upper Tolerance (S3 Ot) | 0.005 mm | |
| Chamfer Angle Outside Diameter (F) | 20 ° | |
| Diameter Lubrication Hole (Dl) | 4 mm | |
| Wall Thickness (S3) | 2 mm | |
| Outer Diameter, Lower Tolerance (Dut) | 0.45 mm | |
| Height, Upper Tolerance (B1Ot) | 0.25 mm |
