Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered W16-H6-RROC. This table explores the base group W16; it does not preserve or approve every requested suffix. Search your complete marking first →
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
“W16” across 2 loaded brands
The base designation is shared, but too few brands have complete boundary dimensions. Use Custom Compare when you want to choose exact suffix variants yourself.
Brand differences at a glance
| Parameter | SKFW 1680.696 × × mm | INAW16-H7-CRSolid shaft |
|---|---|---|
| Comparable specifications | ||
| Brand | SKF | INA |
| Designation | W 16 | W16-H7-CR |
| Product family | Lock washers | — |
| Detailed type | Lock washer for inch lock nuts | Solid shaft |
| Series | — | W16 |
| Bore diameterd | 80.696 mm | — |
| Mass≈m | 0.053 kg | — |
| Engineering — Dimensions | ||
| Side face diameterd 1 | 98.4 mm | — |
| Outside diameter over tabsd 2 | 111.125 mm | — |
| Thickness materialB | 1.575 mm | — |
| Width inner tabf | 8.966 mm | — |
| Inside dimension under inner tabM | 77.165 mm | — |
| Projection of key tangV | 4.775 mm | — |
| Logistics | ||
| Product net weight | 0.053 kg | — |
| eClass code | 23-11-07-05 | — |
| UNSPSC code | 31163218 | — |
| Manufacturer Identity | ||
| Schaeffler Product Code | — | 2049392 |
| Base Type | — | W16 |
| Product Line Id | — | 04 |
| Product identity | ||
| Official product category | Lock washers | — |
| Official taxonomy path | /products/rolling-bearings/accessories/lock-nuts/keyway | — |
| Structure group ID | ANL_011 | — |
| Available from SKF | Yes | — |
| Remanufacturable | No | — |
| Product Identity | ||
| Construction | — | solid shafts, with axial and/or radial threaded holes |
| Short Description | — | Solid shaft |
| Properties | ||
| Locking device | Lock washer | — |
| Technical Data | ||
| Length Maximum (Lmax) | — | 5,900 mm |
| Parallelism (T2) | — | 8 µm |
| Diameter Shaft (Dlw) | — | 16 mm |
| Diameter Shaft Low (H7Tol) | — | -18 µm |
| Diameter Shaft High (H7Tol) | — | 0 µm |
| Surface Hardness Depth (Shdmin) | — | 0.6 mm |
| Roundness (T1) | — | 5 µm |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.