Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions differ
“UEL212” across 2 loaded brands
The base designation is shared, but the loaded boundary dimensions do not agree. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | FAGUEL21260 × 110 × 61.9 mm | INAUEL212-3961.912 × 110 × 61.9 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | FAG | INA |
| Designation | UEL212 | UEL212-39 |
| Detailed type | Radial insert ball bearing | Radial insert ball bearing |
| Bore diameterd | 60 mm | 61.912 mm |
| Outside diameterD | 110 mm | 110 mm |
| WidthB | 61.9 mm | 61.9 mm |
| Basic dynamic load ratingC | 56 kN | 56 kN |
| Basic static load ratingC0 | 36 kN | 36 kN |
| Mass≈m | 1.81 kg | 1.69 kg |
| Minimum operating temperatureTmin | -20 °C | -20 °C |
| Maximum operating temperatureTmax | 120 °C | 120 °C |
| Capabilities & suitability | ||
| Radial load capacity | Yes | — |
| Axial load capacity in one direction | Yes | — |
| Axial load capacity in both directions | Yes | — |
| Lifetimelubricationfreedomfrommaintenance | Yes | — |
| Suitable for grease lubrication | Yes | — |
| Sealedonbothsides | Yes | — |
| Staticangularerrorandmisalignment | Yes | — |
| Dimensions | ||
| Width, outer ringC | 27 mm | — |
| Width, outer ringC | 1.063 in | — |
| Sealing total widthC2 | 27.42 mm | — |
| Sealing total widthC2 | 1.08 in | — |
| Distance racewayS | 31 mm | — |
| Distance racewayS | 1.22 in | — |
| Rib diameter inner ringd1 | 76.48 mm | — |
| Rib diameter inner ringd1 | 3.011 in | — |
| Distance to lubrication holeCa | 7.4 mm | — |
| Distance to lubrication holeCa | 0.291 in | — |
| Outside diameter locking collar/locknutd3 | 84 mm | — |
| Outside diameter locking collar/locknutd3 | 3.307 in | — |
| Width of flatsW | 5 mm | — |
| Width of flatsW | 0.197 in | — |
| Main Dimensions & Performance Data | ||
| Basic static load rating, radialC0r | 36,000 N | — |
| Basic static load rating, radialC0r | 8,093.525 lbf | — |
| Locking collar total widthB1 | 77.9 mm | — |
| Locking collar total widthB1 | 3.067 in | — |
| Basic dynamic load rating, radialCr | 56,000 N | — |
| Basic dynamic load rating, radialCr | 12,589.928 lbf | — |
| Manufacturer Identity | ||
| Schaeffler Product Code | 4107815 | 3652636 |
| Base Type | UEL212 | UEL212-39 |
| Gpsd Group | S04 | I04 |
| Product Line Id | 72 | 72 |
| SAP material number | 3053286620000 | — |
| Base product | 2305080204 | — |
| Mounting Manager ID | UEL212 | — |
| Product Identity | ||
| Construction | Radial insert ball bearing UEL, spherical outer ring, location by eccentric locking collar, RSR seal on both sides | Radial insert ball bearing UEL, spherical outer ring, location by eccentric locking collar, RSR seal on both sides |
| Short Description | Radial insert ball bearing | Radial insert ball bearing |
| Technical Data | ||
| Bore Diameter (D) | 60 mm | 61.912 mm |
| Outside Diameter (Dsp) | 110 mm | 110 mm |
| Total Width (B) | 61.9 mm | 61.9 mm |
| Basic Dynamic Load Rating, Radial (Cr) | 56,000 N | 56,000 N |
| Basic Static Load Rating, Radial (C0R) | 36,000 N | 36,000 N |
| Operating Temperature Min. (Tmin) | -20 °C | -20 °C |
| Locking Collar Total Width (B1) | 77.9 mm | 77.9 mm |
| Operating Temperature Max. (Tmax) | 120 °C | 120 °C |
| Distance To Lubrication Hole (Ca) | 7.4 mm | 7.4 mm |
| Width Of Flats (W) | 5 mm | — |
| Width, Outer Ring (C) | 27 mm | 27 mm |
| Rib Diameter Inner Ring (D1) | 76.48 mm | 76.48 mm |
| Outside Diameter Locking Collar/Locknut (D3) | 84 mm | 84 mm |
| Sealing Total Width (C2) | 27.42 mm | — |
| Distance Raceway (S) | 31 mm | 31 mm |
| Bore Diameter, Inch (D) | — | 2.44 in |
| Width Of Flats (Inch) (W) | — | 0.188 in |
| Temperature range | ||
| Operating temperature min.Tmin | -20 °C | — |
| Operating temperature min.Tmin | -4 °F | — |
| Operating temperature max.Tmax | 120 °C | — |
| Operating temperature max.Tmax | 248 °F | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.