Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered UEL212-39. This table explores the base group UEL212; it does not preserve or approve every requested suffix. Search your complete marking first →
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
“UEL212” across 2 loaded brands
The base designation is shared, but the loaded boundary dimensions do not agree. Use Custom Compare when you want to choose exact suffix variants yourself.
Brand differences at a glance
| Parameter | FAGUEL21260 × 110 × 61.9 mm | INAUEL212-3961.912 × 110 × 61.9 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | FAG | INA |
| Designation | UEL212 | UEL212-39 |
| Detailed type | Radial insert ball bearing | Radial insert ball bearing |
| Bore diameterd | 60 mm | 61.912 mm |
| Outside diameterD | 110 mm | 110 mm |
| WidthB | 61.9 mm | 61.9 mm |
| Basic dynamic load ratingC | 56 kN | 56 kN |
| Basic static load ratingC0 | 36 kN | 36 kN |
| Mass≈m | 1.81 kg | 1.69 kg |
| Minimum operating temperatureTmin | -20 °C | -20 °C |
| Maximum operating temperatureTmax | 120 °C | 120 °C |
| Capabilities & suitability | ||
| Radial load capacity | Yes | — |
| Axial load capacity in one direction | Yes | — |
| Axial load capacity in both directions | Yes | — |
| Lifetimelubricationfreedomfrommaintenance | Yes | — |
| Suitable for grease lubrication | Yes | — |
| Sealedonbothsides | Yes | — |
| Staticangularerrorandmisalignment | Yes | — |
| Dimensions | ||
| Width, outer ringC | 27 mm | — |
| Width, outer ringC | 1.063 in | — |
| Sealing total widthC2 | 27.42 mm | — |
| Sealing total widthC2 | 1.08 in | — |
| Distance racewayS | 31 mm | — |
| Distance racewayS | 1.22 in | — |
| Rib diameter inner ringd1 | 76.48 mm | — |
| Rib diameter inner ringd1 | 3.011 in | — |
| Distance to lubrication holeCa | 7.4 mm | — |
| Distance to lubrication holeCa | 0.291 in | — |
| Outside diameter locking collar/locknutd3 | 84 mm | — |
| Outside diameter locking collar/locknutd3 | 3.307 in | — |
| Width of flatsW | 5 mm | — |
| Width of flatsW | 0.197 in | — |
| Main Dimensions & Performance Data | ||
| Basic static load rating, radialC0r | 36,000 N | — |
| Basic static load rating, radialC0r | 8,093.525 lbf | — |
| Locking collar total widthB1 | 77.9 mm | — |
| Locking collar total widthB1 | 3.067 in | — |
| Basic dynamic load rating, radialCr | 56,000 N | — |
| Basic dynamic load rating, radialCr | 12,589.928 lbf | — |
| Manufacturer Identity | ||
| Schaeffler Product Code | 4107815 | 3652636 |
| Base Type | UEL212 | UEL212-39 |
| Gpsd Group | S04 | I04 |
| Product Line Id | 72 | 72 |
| SAP material number | 3053286620000 | — |
| Base product | 2305080204 | — |
| Mounting Manager ID | UEL212 | — |
| Product Identity | ||
| Construction | Radial insert ball bearing UEL, spherical outer ring, location by eccentric locking collar, RSR seal on both sides | Radial insert ball bearing UEL, spherical outer ring, location by eccentric locking collar, RSR seal on both sides |
| Short Description | Radial insert ball bearing | Radial insert ball bearing |
| Technical Data | ||
| Bore Diameter (D) | 60 mm | 61.912 mm |
| Outside Diameter (Dsp) | 110 mm | 110 mm |
| Total Width (B) | 61.9 mm | 61.9 mm |
| Basic Dynamic Load Rating, Radial (Cr) | 56,000 N | 56,000 N |
| Basic Static Load Rating, Radial (C0R) | 36,000 N | 36,000 N |
| Operating Temperature Min. (Tmin) | -20 °C | -20 °C |
| Locking Collar Total Width (B1) | 77.9 mm | 77.9 mm |
| Operating Temperature Max. (Tmax) | 120 °C | 120 °C |
| Distance To Lubrication Hole (Ca) | 7.4 mm | 7.4 mm |
| Width Of Flats (W) | 5 mm | — |
| Width, Outer Ring (C) | 27 mm | 27 mm |
| Rib Diameter Inner Ring (D1) | 76.48 mm | 76.48 mm |
| Outside Diameter Locking Collar/Locknut (D3) | 84 mm | 84 mm |
| Sealing Total Width (C2) | 27.42 mm | — |
| Distance Raceway (S) | 31 mm | 31 mm |
| Bore Diameter, Inch (D) | — | 2.44 in |
| Width Of Flats (Inch) (W) | — | 0.188 in |
| Temperature range | ||
| Operating temperature min.Tmin | -20 °C | — |
| Operating temperature min.Tmin | -4 °F | — |
| Operating temperature max.Tmax | 120 °C | — |
| Operating temperature max.Tmax | 248 °F | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.